LinMot 0185-0130 Installation guide

LinMot
Brand
LinMot
Model
0185-0130
Type
Installation guide

This manual is also suitable for

LinMot 0185-0130 is a bearing kit with a lubricant depot, designed for use with the PS10-70 linear motor from LinMot. This kit provides a convenient and effective way to lubricate the motor's bearings, ensuring optimal performance and extending the motor's lifespan.

The bearing kit includes a lubricant depot, which can be filled with grease and then attached to the motor. The depot slowly releases grease over time, lubricating the bearings and preventing them from drying out. The kit also includes a seal and a wiper, which help to keep the grease in place and prevent contamination.

The bearing kit is easy to install and can be used with either option A or option B for lubrication. Option A involves applying the lubricant on the surface behind the used wiper, while option B involves using a hand press to apply the lubricant via the grease nipple.

LinMot 0185-0130 is a bearing kit with a lubricant depot, designed for use with the PS10-70 linear motor from LinMot. This kit provides a convenient and effective way to lubricate the motor's bearings, ensuring optimal performance and extending the motor's lifespan.

The bearing kit includes a lubricant depot, which can be filled with grease and then attached to the motor. The depot slowly releases grease over time, lubricating the bearings and preventing them from drying out. The kit also includes a seal and a wiper, which help to keep the grease in place and prevent contamination.

The bearing kit is easy to install and can be used with either option A or option B for lubrication. Option A involves applying the lubricant on the surface behind the used wiper, while option B involves using a hand press to apply the lubricant via the grease nipple.

Installation Guide Linear Motors ENG
NTI AG / LinMot 0185-0130-E-D_1V0_IG_PA10-70_28 Page 23 / 41
6.4 Bearing kit with lubricant depot
6.4.1 Overview
Installation Guide Linear Motors ENG
Page 24 / 41 0185-0130-E-D_1V0_IG_PA10-70_28 NTI AG / LinMot
6.4.2 Mounting
1. Insert bearing tube.
Bearing tube is already lubricated with initial lubricant.
2. Tighten the fastening screws with 2.4 Nm.
Screws are already coated with threadlocker (Tuflok).
3. Assemble lubricant depot (back).
The lubricant depot, the seal and the wiper are assembled
and positioned on the stator.
4. Tighten the fastening screws with 2.4 Nm.
Screws are already coated with threadlocker (Tuflok).
5. Insert lubricant depot (front).
Assemble the lubricant depot with the wiper and tighten it
with fastening screws (2.4 Nm torque). Screws are already
coated with threadlocker (Tuflok).
6. Lubrication
Application of the lubricant on the surface behind the used
wiper (Option A) or via the grease nipple with a hand press
(Option B).
Item
Description
Item-No.
PA10-70/28
Lubricant depot for PS10-70 with wiper + lubricant (6
ml) Important! Bearing kit must be ordered separately.
0150-3543
360°
Option A Option B
Montageanleitung Linearmotoren DE
NTI AG / LinMot 0185-0130-E-D_1V0_IG_PA10-70_28 Seite 23 / 41
6.4 Lagersatz mit Fettdepot
6.4.1 Übersicht
Montageanleitung Linearmotoren DE
Seite 24 / 41 0185-0130-E-D_1V0_IG_PA10-70_28 NTI AG / LinMot
6.4.2 Montage
1. Lagerrohr einschieben.
Das Lagerrohr ist bei der Anlieferung initial geschmiert.
2. Befestigungsschrauben mit 2.4 Nm anziehen.
Die Befestigungsschrauben sind bereits mit
Schraubensicherung (Tuflok) bestrichen.
3. Fettdepot (hinten) einsetzen.
Das Fettdepot, die Dichtung und der Abstreifer werden
zusammengebaut und auf den Stator positioniert.
4. Befestigungsschrauben mit 2.4 Nm anziehen.
Die Befestigungsschrauben sind bereits mit
Schraubensicherung (Tuflok) bestrichen.
5. Fettdepot (vorne) einsetzen.
Das Fettdepot und der Abstreifer werden zusammengesetzt
und mit einem Anzugsmoment von 2.4 Nm verschraubt.
Die Befestigungsschrauben sind bereits mit
Schraubensicherung (Tuflok) bestrichen.
6. Einfetten
Applizieren des Fetts auf der Fläche hinter dem
eingesetzten Abstreifer (Option A) oder über den
Schmiernippel mittels Handpresse (Option B).
Artikel
Beschreibung
Art-Nr.
PA10-70/28
Fettdepot für PS10-70 mit Abstreiferdichtung + Schmierstoff (6 ml)
Wichtig! Lagersatz muss separat bestellt werden.
0150-3543
360°
Option A Option B
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

LinMot 0185-0130 Installation guide

LinMot
Brand
LinMot
Model
0185-0130
Type
Installation guide
This manual is also suitable for

LinMot 0185-0130 is a bearing kit with a lubricant depot, designed for use with the PS10-70 linear motor from LinMot. This kit provides a convenient and effective way to lubricate the motor's bearings, ensuring optimal performance and extending the motor's lifespan.

The bearing kit includes a lubricant depot, which can be filled with grease and then attached to the motor. The depot slowly releases grease over time, lubricating the bearings and preventing them from drying out. The kit also includes a seal and a wiper, which help to keep the grease in place and prevent contamination.

The bearing kit is easy to install and can be used with either option A or option B for lubrication. Option A involves applying the lubricant on the surface behind the used wiper, while option B involves using a hand press to apply the lubricant via the grease nipple.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents