2. Kamado Joe
  3. KJ15041123 Konnected Joe 18 Inch Charcoal Grill and Smoker

Kamado Joe KJ15041123 Konnected Joe 18 Inch Charcoal Grill and Smoker Installation guide

  • Hello! I've reviewed the Instruction Sheet for the Konnected Joe KJ15041123/KJ15041523 Element Plug. This document provides step-by-step instructions on how to safely remove and replace the element plug, including the necessary precautions. I'm here to help answer any questions you may have about these instructions or the related grill components.
  • What should I do before handling the grill?
    What precautions should I take when handling components?
    How can I identify the element wire?
KJ15041123/KJ15041523
CAUTION - SAFETY PRECAUTIONS - READ BEFORE USE
• Make sure your grill has fully cooled before handling to avoid burns.
• Some components may have sharp edges. Use caution to avoid injury.
• Disconnect the power supply from the grill before handling.
Instruction Sheet Code: 9804220062 221115-GH
From under the grill, remove the 3
screws and the wire harness cover.
Unplug the element from the wire
harness. The element wire can
be identified with the yellow and
white wire.
Remove the charcoal grate from
the grill
Remove the 2 acorn nuts from the
element mounting plate. Then, with
extreme caution, lift the element
straight up and out of the grill. (NOTE
- you may need to lightly hold down
the element bracket to remove the
element from the bracket).
Remove the element plug kit from
the grill
Repeat the steps in reverse order
to install the new element plug kit.
Konnected Joe™
Element Plug
/