Pulsar DC/DC10SE is a DC/DC voltage converter that can step up or step down the voltage to a desired output between 5V to 15V DC, with a maximum load current of 1A. It features short-circuit and overload protection, as well as an LED indication for input, output, and failure status. The converter is easy to install, with mounting options including adhesive tape or screws. Applications include increasing voltage from 9.5V to 12V DC or lowering voltage from 16V to 9V DC.
Pulsar DC/DC10SE is a DC/DC voltage converter that can step up or step down the voltage to a desired output between 5V to 15V DC, with a maximum load current of 1A. It features short-circuit and overload protection, as well as an LED indication for input, output, and failure status. The converter is easy to install, with mounting options including adhesive tape or screws. Applications include increasing voltage from 9.5V to 12V DC or lowering voltage from 16V to 9V DC.
Pulsar DC/DC10SE is a DC/DC voltage converter that can step up or step down the voltage to a desired output between 5V to 15V DC, with a maximum load current of 1A. It features short-circuit and overload protection, as well as an LED indication for input, output, and failure status. The converter is easy to install, with mounting options including adhesive tape or screws. Applications include increasing voltage from 9.5V to 12V DC or lowering voltage from 16V to 9V DC.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI