Danfoss DH/DS Orbital Motors Installation guide

Danfoss
Brand
Danfoss
Model
DH/DS Orbital Motors
Type
Installation guide
P301 075
Y
X
P301 071
P301 072
P301 073
P301 074
Max. tilspændingsmoment
Max. tightening torque
Max. Anzugsmoment
Couple de serrage max.
X Y
Forskruning
Screwed connection
Verschraubung
Raccord
G 1/4
7/16-20
UNF
G 1/2 7/8-14 UN
med stålskive
with steel washer
mit Stahlscheibe
avev rondelle en acier
40 Nm
(350 lbf.in)
130 Nm
(1150 lbf.in)
med aluminiumsskive
With aluminium washer
mit Aluminiumsscheibe
avec rondelle en alum
30 Nm
(270 lbf.in)
70 Nm
(620 lbf.in)
med skærekant
with cutting edge
mit Dichtkante
tranchant
40 Nm
(350 lbf.in)
130 Nm
(1150 lbf.in)
med o-ring boss port
with o-ring boss port
mit O-Ring boss
avec joint torique boss port
20 Nm
(180 lbf.in)
180 in-lbs)
90 Nm
(795 lbf.in)
795 in-lbs)
Installation Guide
Hydraulic Motor
Type DH/DS
© Danfoss, 2014-03 11050676 • Rev BB • Mar 2014 1
11050 676
11050 676
  • Page 1 1

Danfoss DH/DS Orbital Motors Installation guide

Danfoss
Brand
Danfoss
Model
DH/DS Orbital Motors
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents