Danfoss EVR 4, 6 and 8 (EVO 102 and 202) Normally closed/Normally open (NC/NO) Installation guide

Type
Installation guide
Nm kpm ft-lbs Torx size
2.5 0.25 1.8 T 15
(NO)
(NC)
032R9555
(NC flare)
DKRCC.PI.BB0.C3.02-520H5588
032R9555
© Danfoss A/S (AC-SMC / MWA) 10-2011
(NC solder)
Note: Tube
construction
Instruction
EVR 4, 6 and 8 (EVO 102 & EVO 202)
Normally Closed/Normally Open (NC/NO)
Refrigerants CFC, HCFC, HFC
(NO solder)
Dismounting gasket :
Pres and twist
Be sure that the
O-ring is in place
Warning
Never switch on power to
the coil when the coil is
dismounted from the valve.
Otherwise the coil may be
damaged and there is risk
of injuries and burns.
!
Warning
Never switch on power
to the coil when the coil
is dismounted from the
valve. Otherwise the coil
may be damaged and
there is risk of injuries and
burns
Warning
Never switch on power to
the coil when the coil is
dismounted from the valve.
Otherwise the coil may be
damaged and there is risk
of injuries and burns.
!
4.7
1.2
4.2
1.5
Old
New
Warning
Make sure that you use
the new support ring.
  • Page 1 1

Danfoss EVR 4, 6 and 8 (EVO 102 and 202) Normally closed/Normally open (NC/NO) Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI