SportsPlay TOT TOWN CASTLE 4 Installation guide

AFACAN CASTLE 3-T

PLEASE RETAIN THIS INSTRUCTION SHEET IN YOUR FILES. IT CONTAINS IMPORTANT REPLACEMENT PARTS

INFORMATION. ALL EQUIPMENT SHOULD BE INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS.

IT IS IMPORTANT TO USE AND MAINTAIN ALL PLAY EQUIPMENT PROPERLY. IMPROPERLY MAINTAINED PLAY

EQUIPMENT CAN CAUSE SERIOUS INJURY. PERIODIC INSPECTIONS, MAINTENANCE, REPAIR AND/OR REPLACEMENT

OF DAMAGED PARTS IS NECESSARY FOR SAFE OPERATION OF EQUIPMENT AND SAFETY OF USERS.

RESILIANT SURFACING SHOULD BE USED UNDER ALL PLAYGROUND EQUIPMENT.

THE SUGGESTED USE AREA IS TO BE COVERED BY THESE MATERIALS OUTLINED ON THE PLAN VIEW. NO OTHER

PIECE OF EQUIPMENT OR ITS USE AREA MAY ENCROACH ON THIS USE AREA

PACKING LIST

QTY

DESCRIPTION

MAIN FREMA 6 PANEL TYPE 1

PLATFORMS 1 PANEL TYPE 2

TRANSFER ST. 1 PANEL TYPE 3

EXTENSION PC. 1 PANEL TYPE 4

SLIDE GUARD

SLIDE

ROOF

HARDWARE BAG

TOTAL: 27 PIECES ON 3 PALLED WEIGHT: 709 Lb CLASS 70

Stack components over the posts as shown below:

Align panels 1 and panel 2, then slide them over the posts together.

Slide extension piece over post. Align panel 1 and panel 3, and slide them over the posts together

Align panel 1 and panel 4, and slide them over the posts together. Next, align panel 1 and the game

panel and slide them over the posts together

Drill Ø0,46in holes through posts, slide guards, and protrusions of roof that are inserted into tops of

posts. Attach slide guards and roof with hardware provided.

Secure structure to solid surface using anchor bolts, or secure structure to ground using

0,47 x 0,98in spikes. (Not provided)