T: +44 (0)20 8441 0352 F: +44 (0)20 8441 0219 E: [email protected]o.uk hib.co.uk
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the interest
of continuous product development, HiB reserves the right to alter specications as necessary. E & OE.
FI #02 004 R171114 Ver No. 1.0 Jan 2018
Eris 30 Art No. 45300 / Eris 40 Art No. 45000
Eris 50 Art No. 45100 / Eris 60 Art No. 45200
Eris 80 Art No. 48100 / Eris120 Art No. 48200
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to them
during installation to ensure that your product is tted safely and that it
retains its high quality nish.
Please retain this leaet for future reference.
Before drilling, ensure there are no hidden cables or pipes in the wall.
Installation
1. Position the cabinet in a suitable location.
2. Carefully mark the position of the cabinet using a soft pencil ensuring
it is level. Remove the cabinet and mark the mounting points (see
g. A). Please ensure that all marked mounting points accurately
match up with the xing points on the cabinet.
3. Using a suitable drill bit, drill holes in the marked positions to a
suitable depth. If drilling through tile, use a ceramic drill bit.
4. Insert wall plugs level with the surface of the wall. If tting to a
tiled surface, wall plugs should be inserted below the tile surface to
avoid cracking. NB. For plasterboard walls, specialist xings should be
purchased, available from any DIY or hardware store.
5. Fix the brackets to the wall using the screws provided. (See Fig. B).
6. Hang the cabinet on the wall ensuring that it is rmly located on the
mounting brackets.
7. Once in position make a mark on the wall through the hole in the
cabinet (See Fig. A). Remove the cabinet, drill a hole in the wall at the
marked position and insert wall plug. Rehang the cabinet and secure
using screw, washer and cover provided.
8. Align door(s) according to Figure C.
9. Starting with the top shelf, insert the shelf supports in the desired
position and t the shelf. (See g. D).
Care Instructions
Do not use abrasives or solvents when cleaning this product.
Wipe o all water spillages as soon as possible using a soft, damp cloth.
Aftercare Service
In the unlikely event that this product should fail please contact HiB
customer services, contact detail shown below.
Move door(s) up/down
Move door(s) left/right
Move door away/towards
the cabinet
Fixing Preparation (Fig A)
Fixing Brackets (Fig B)
Door Adjustments (Fig C)
Fitting Shelves (Fig D)
Caution
We recommend that you place this cabinet on a soft at
surface to ensure no breakages.
We also recommend that you leave corner protectors on until
nal tting.
Mounting Points
Securing Hole
REAR VIEW
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
