Glacier Bay F51A1074CP Installation guide

Brand: Glacier Bay

Model: F51A1074CP

Category: Sanitary ware

Type: Installation guide

SKU#

192-981

193-014

Model#

F51A1074CP

F51A1074BN

INSTALLATION AND CARE GUIDE

CENTERSET LAVATORY FAUCET

Questions, problems, missing parts?

Before returning to the store,

call Glacier Bay Customer Service

8 a.m.-6 p.m., EST, Monday-Friday

1-855-434-5224

HOMEDEPOT.COM

THANK YOU

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this faucet. We strive

to continually create quality products designed to enhance your home. Visit us online to see our full line of products

available for your home improvement needs. Thank you for choosing Glacier Bay!

THD 9/2014 REV.01

PLANNING INSTALLATION

Tools and Hardware Required

Important Information................................2

Warranty......................................................2

Pre-Installation...........................................2

Planning Installation................................2

Tools and Hardware Required..................2

Package Contents....................................3

Installation.................................................4

Care & Cleaning.........................................7

Troubleshooting.........................................7

Service Parts..............................................8

Table of Contents

Pre-Installation

LIMITED LIFETIME WARRANTY

Important Information

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.

Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD Glacier (1-855-434-

5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer

purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended

a ve year limited warranty from the date of purchase, with all other terms of this warranty applying except the

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province. Please see a store or contact 1-855-HD Glacier for

more details.

Before you begin to install this product, ensure that all parts are present. Compare parts with the package

contents list. If any part is missing or damaged, do not attempt to install the product. Contact customer service

for replacement parts.

Adjustable

Wrench

Channel-

Lock Pliers

Safety

Goggles

Sealant

□ Observe all local plumbing and building codes.

□ Cover the sink drain to avoid losing any parts.

□ Review the care and cleaning section included in this guide.

Warranty

(2) Supply

lines

Faucet Assembly

Drain Assembly

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

A Faucet 1

B Aerator 1

C Lock nut 2

D Drain ange (Preassembled to Drain body (G)) 1

E Rubber washer (Preassembled to Drain body (G)) 1

F Lock nut (Preassembled to Drain body (G)) 1

G Drain body 1

H Plunger (Preassembled to Drain body (G)) 1

I Lift rod 1

J Thumb screw (Preassembled to Lift rod (K)) 1

K Lift rod strap 1

L Spring clip (Preassembled to Ball rod (M)) 1

M Ball rod 1

N Ball nut (Preassembled to Ball rod (M)) 1

O Bushing (Preassembled to Ball rod (M)) 1

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Installing the faucet assembly Preparing the pop-up assembly

Shut off the water supply.

Place the faucet (A) through the mounting-

holes in the sink.

Clean off the installation surface.

Secure the faucet (A) to the sink using the

mounting nuts (C) provided .

Installation

1 2

CAUTION : Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

NOTE: If the sink is uneven, use silicone under the

putty plate.

Remove the plunger (H) and drain ange (D) from

the drain body (G).

Screw the lock nut (F) all the way down, and

push the rubber washer (E) down.

Installing the drain body

Installing the plunger and ball

rod

Insert the plunger (H) into the drain hole in the

sink.

Apply silicone caulk (not included) under the

drain ange (D) and place the drain ange (D)

over the drain hole in the sink.

From underneath the sink, screw the drain

body (G) onto the drain ange (D). Ensure that

the opening (1) for the ball rod on the drain

body (G) faces towards the rear of the sink.

Tighten the rubber washer (E) and lock nut (F)

on the drain body (G).

Remove the lift rod strap (K) and spring clip (L)

from the ball rod (M).

Push the bushing (O) and ball nut (N) against

the hole in the drain body (G) and tighten the

ball nut (N) onto the threaded end.

Installation (continued)

Remove the ball nut (N). Insert the ball rod (M)

into the drain body (G) and through the hole of

the plunger (H).

For easier removal and cleaning, rotate the

plunger (H) 90 degrees so that the ball rod (M)

does not go through the hole in the plunger (H).

HOMEDEPOT.com/GLACIERBAY

Please contact 1-855-434-5224 for further assistance.

Attaching the ball rod and strap

Installing the lift rod

Adjusting the lift rod

Adjust the ball rod (M) to the down position.

Insert the lift rod (I) through the faucet (A) and

down into the strap (K). Tighten the thumb

screw (J).

Loosen the thumb screw (J) on the lift rod

strap (K).

Attach the ball rod (M) to the strap (K) using

the clip (L).

Adjust the lift rod (I) to the down position and

re-tighten the thumb screw (J).

Installation (continued)

M L

Care and Cleaning

Clean periodically with a soft cloth.

This faucet is designed for years of trouble-free performance. Keep it looking new by doing the following:

Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the nish and void your warranty.

Problem Possible Cause Solution

There are leaks underneath the

handle.

The retainer nut has come loose

and the O-ring on the cartridge

is dirty or damaged.

Tighten the retainer nut.

Clear or replace the O-ring.

The aerator leaks or has an

inconsistent water ow pattern.

The aerator is dirty or mis-tted. Remove the aerator and check for

debris in the aerator screens.

Conrm that the rubber washer is

properly installed.

The water will not shut off

completely.

The rubber seat and spring is

dirty or broken.

Remove the handle and cartridge to

check the rubber seat and spring.

Clean or replace.

Checking for leaks

Turn on the water supply to the faucet.

Use the aerator wrench to remove the aerator

(B) from the faucet (A).

When nished, turn the water off and replace

the aerator (B) with the aerator wrench.

Turn the handles on the faucet (A) and allow

the hot and cold water to run for at least 1

minute to ush out any debris and identify any

possible leaks.

Installation (continued)

Troubleshooting

NOTE: Refer to the service parts section in this manual for

a detailed drawing showing the location of the parts listed

below.

Connecting the water supply

lines

Use 1/2 in. I.P.S. faucet connections (2), or use

supply line coupling nuts (3) (not included) with

a 3/8 in. O.D. ball-nose riser (1).

Use wrenches to tighten the connections. Do

not overtighten.

HOMEDEPOT.com/GLACIERBAY

Please contact 1-855-434-5224 for further assistance.

3.1

5.1

5.2

3.2

10.

11.

12.

Faucet ID Tags can

be found by removing

the hot water handle

DO NOT REMOVE

Service Parts

Part Description Part No.

1 Metal handle A069382

2 Index button A66G325

3.1 Handle adaptor (cold) A66D574H

3.2 Handle adaptor (hot) A66D574C

4 Retainer nut and washer A663631

5.1 Ceramic disc cartridge (cold) A507104N

5.2 Ceramic disc cartridge (hot) A507103N

Part Description Part No.

6 Putty plate A011005

7 Lock nut set A504023

8 Aerator A500992N-T

9 Lift rod A025041

10 Pop-up assembly A556012L

11 Hex wrench A031000NI

12 Aerator wrench A031245NI

Many replacement cartridges, aerators, and drain

assemblies can be purchased at your local The

Home Depot store or online at HOMEDEPOT.COM

Questions, problems, missing parts?

Before returning to the store,

call Glacier Bay Customer Service

8 a.m.-6 p.m., EST, Monday-Friday

1-855-HD-GLACIER

HOMEDEPOT.COM

Retain this manual for future use.

Page is loading ...

Glacier Bay F51A1074CP Installation guide

Brand: Glacier Bay

Model: F51A1074CP

Category: Sanitary ware

Type: Installation guide

Download PDF

report

in other languages

español: Glacier Bay F51A1074CP Guía de instalación

Glacier Bay F51A1074CP Installation guide

Glacier Bay F51A1074CP Installation guide

in other languages

Related papers

Other documents