EXSYS EX-3501-L Datasheet

EXSYS
Brand
EXSYS
Model
EX-3501-L
Category
Peripheral controllers
Type
Datasheet

EXSYS EX-3501-L is a dual-port SATA II RAID controller that supports RAID 0, 1, and 0+1 modes. It is compatible with PCI Express slots from x1 to x16 and can support hard drives larger than 137GB. The controller comes with a software driver and RAID kit, and it is bootable.

Some possible use cases for the EXSYS EX-3501-L include:

  • Creating a RAID 0 array to improve the performance of a single hard drive.
  • Creating a RAID 1 array to mirror data across two hard drives for redundancy.
  • Creating a RAID 0+1 array to combine the performance benefits of RAID 0 with the data protection of RAID 1.

EXSYS EX-3501-L is a dual-port SATA II RAID controller that supports RAID 0, 1, and 0+1 modes. It is compatible with PCI Express slots from x1 to x16 and can support hard drives larger than 137GB. The controller comes with a software driver and RAID kit, and it is bootable.

Some possible use cases for the EXSYS EX-3501-L include:

  • Creating a RAID 0 array to improve the performance of a single hard drive.
  • Creating a RAID 1 array to mirror data across two hard drives for redundancy.
  • Creating a RAID 0+1 array to combine the performance benefits of RAID 0 with the data protection of RAID 1.
Serial-ATA 2
EX
-
3501
-L
LowProfile PCI
-
Express S
-
ATA 2 RAID 0/1 Controller, 2 Port
Beschreibung :
Der EX
-
3501
-
L ist ein leistungsfähiger LowProfile Serial
-
ATA 2 RAID Controller mit der neuen PCI
-
Express Technologie für schmale
Gehäuse bis maximale Höhe von 8cm. Er unterstützt RAID 0 (Stripping / Geschwindigkeit), RAID 1 (Mirroring / Datensicherheit),
RA
ID
0+1. Der EX
-
3501
-
L hat zwei interne Serial
-
ATA 2 Ausgänge für Serial
-
ATA 2 Festplatten. Es wird ein Software Treiber und RAID KI
T
mitgeliefert. Er ist die richtige Lösung um Serial
-
ATA 2 Geräte an einen PCI
-
Express Slot anzuschließen.
Merkmale :
PCI
-
Express 1.0a Spezifikation
RAID: Unterstützt RAID 0 (Stripping / Geschwindigkeit), RAID 1 (Mirroring / Datensicherheit) und RAID 0+1
Windows basierende RAID Utilitys für Wiederherstellung des RAID
ROM BIOS: Unterstützt Festplatten über 137GB
Befehls Mode: Unterstützt Legacy Command Queuing (LCQ) und Native Command Queuing (NCQ)
Bootbar
Chip
-
Set :
1 x Silicon Image SIL
-
3132
Datentransfer
-
Rate :
Bis 3.0Gbps
Anschlüsse :
2 x Intern 7 Pin S
-
ATA 2
Hardwaresysteme :
PCI
-
Express Slot x1 bis x16
Abmessung / Gewicht :
129 x 63mm / 200g
Lieferumfang :
EX
-
3501
-
L, 2 x 7 Pin Serial
-
ATA Kabel, Treiber CD, Handbuch
Arbeitstemperatur :
Luftfeuchtigkeit :
0 bis 55
0
C
5 bis 95%
LowProfile PCI
-
Express S
-
ATA 2 RAID 0/1 Controller, 2 port
Description:
The EX
-
3501
-
L is the most powerful LowProfile Serial
-
ATA 2 RAID controller to accommodate Serial
-
ATA 2 hard drives with the new
technology of PCI Express.
He can use for small computer case with a maximum high of 8cm.
Serial ATA is a high
-
speed serial link re-
placement fort the parallel ATA attachment of mass storage devices. The current data rate is 1.5Gb/s and 3.0Gb/s. He support
RAI
D 0
(stripping), RAID 1 (mirroring) and RAID 0+1. The EX
-
3501
-
L supports two internal Serial
-
ATA 2 ports. It is the right choice for
a PCI
Express to Serial
-
ATA 2 versatile devices.
Feature :
Fully PCI Express Specifications 1.0a Compliant
RAID: Support RAID 0 (stripping / performance) and RAID 1 (mirroring / data security) and RAID 0+1
Bundle Windows based RAID utilities for rebuilding array
Supports Legacy Command Queuing (LCQ), Supports Native Command Queuing (NCQ)
Co
-
resides with Motherboard IDE devices
ROM BIOS support RAID Setup and Boot Feature
Support hard drives greater then 137GB
Connectors :
2 x Internal 7 Pin Serial
-
ATA 2 connectors
Hardware system :
PCI
-
Express Slot x1 to x16
Size / Weight :
129 x 63mm / 200g
Packaging contents :
EX
-
3501
-
L, 2 x 7 pin Serial
-
ATA cable, Driver CD, Manual
Chip
-
Set :
1 x Silicon Image SIL
-
3132
Data transfer rate :
Up to 3.0Gbps
Operating Temperature :
Operating Humidity :
0 up to 55
0
C
5 up to 95%
Anwendung/Application :
Operating System (OS):
Geprüft/Approved:
Verpackung/Packing:
RAID 0, 1
  • Page 1 1

EXSYS EX-3501-L Datasheet

EXSYS
Brand
EXSYS
Model
EX-3501-L
Category
Peripheral controllers
Type
Datasheet

EXSYS EX-3501-L is a dual-port SATA II RAID controller that supports RAID 0, 1, and 0+1 modes. It is compatible with PCI Express slots from x1 to x16 and can support hard drives larger than 137GB. The controller comes with a software driver and RAID kit, and it is bootable.

Some possible use cases for the EXSYS EX-3501-L include:

  • Creating a RAID 0 array to improve the performance of a single hard drive.
  • Creating a RAID 1 array to mirror data across two hard drives for redundancy.
  • Creating a RAID 0+1 array to combine the performance benefits of RAID 0 with the data protection of RAID 1.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents