Speakman SB-1041 Installation guide

Speakman
Brand
Speakman
Model
SB-1041
Type
Installation guide

This manual is also suitable for

Speakman SB-1041-BN is a high-quality faucet designed for durability and ease of use. It features an adjustable flow rate of 1.5 gallons per minute, making it water-efficient without sacrificing performance. The faucet's 9/16"-24 UNF inlet threads and 3/8" compression fittings make it easy to connect to most standard plumbing systems. Additionally, the included mounting hardware ensures a secure installation. The Speakman SB-1041-BN is a great choice for both residential and commercial applications.

Speakman SB-1041-BN is a high-quality faucet designed for durability and ease of use. It features an adjustable flow rate of 1.5 gallons per minute, making it water-efficient without sacrificing performance. The faucet's 9/16"-24 UNF inlet threads and 3/8" compression fittings make it easy to connect to most standard plumbing systems. Additionally, the included mounting hardware ensures a secure installation. The Speakman SB-1041-BN is a great choice for both residential and commercial applications.

INSTRUCTIONS FOR MODELS
92-SB-1041-03
For additional assistance or service please contact:
SPEAKMAN
®
Company
400 Anchor Mill Road
New Castle, DE 19720
800-537-2107
customerser[email protected]
www.speakman.com
SB-1041
HELPFUL TOOLS & SUPPLIES:
TOOLS AND SUPPLIES
Adjustable
Wrench
11mm
Wrench
Safety
Glasses
Plumber’s
Putty
Warranty information can be found at:
www.speakman.com
WARRANTY
MAINTENANCE
Cover your drain to prevent loss of parts. Be sure to
wear eye protection while cutting pipe.
SAFETY TIPS
IMPORTANT
• Be sure to read instructions thoroughly before
beginning installation.
• Do not over-tighten any connections or damage
may occur.
• This faucet has an operating range of 20-80 psi.
Your new Speakman Product is designed for years of
trouble-free performance. Keep it looking new by
cleaning it periodically with a soft cloth. The use of harsh
chemicals and abrasives may damage the finish and
void the product warranty. Please be sure to only use
approved cleaners. Please contact Speakman for any
clarification of acceptable cleaners.
1
Place Rubber Gasket over Hoses and align to
base of Faucet.
2
Place Hoses, one at a time, thru hole in
mounting surface. Lower Faucet into position.
3
From below, install Rubber Washer (1), Metal
Washer (2), and secure with Mounting Nut (3).
Align Faucet to desired position and wrench
tighten Mounting Nut (3).
OR
4
Make connections to water supplies. The inlet
threads of the faucet are 9/16”-24 UNF and
will accept a 3/8” Compression Fitting.
Wrench Tighten.
Accepts a 3/8”
Compression
Fitting
SUPPLY STOPS NOT INCLUDED
5
If water supply is 1/2" Compression, use the
provided adapter and 1/2" IPS faucet
connections (not supplied) ❶ or use the supplied
coupling nuts ❸ with 3/8” O.D. ball nose risers
(not supplied) ❷. Use wrenches to tighten
connections. Do not over-tighten.
INLET SUPPLIES NOT INCLUDED
6
Remove Aerator from faucet.
7
Turn on water supplies. Activate faucet and flush
both HOT and COLD water for 1 minute.
8
Turn OFF faucet and re-install Aerator. Hand
Tighten.
SB-1041 REPAIR PARTS
ITEM NO. PART NO. DESCRIPTION
RPG05-0822 CARTRIDGE
RPG05-108748 1.5 GPM AERATOR ASSEMBLY
RPG05-109424 MOUNTING HARDWARE GROUP
NOTES:
COMPLIANCE:
CONNECTIONS:
ASME A112.18.1/CSA B 125.1
Supply Connection:
1/2-14 NPSM-2A Connection or
9/16"-24 UNF Connection
FLOW DATA:
• 1.5gpm (5.7 L/min)
4
1
8
"
105mm
2
1
8
"
54mm
1 1/4" MIN DECK HOLE SIZE
3
3
16
"
82mm
MAX DECK
THICKNESS
1/2-14 NPSM-2A
9/16"-24 UNF
6
1
2
"
166mm
5"
127mm
7
3
4
"
197mm
15°
2"
[51mm]
MIN. TO WALL
2"
[51mm]
MIN. TO SINK LEDGE
2"
MIN. TO LEDGE
51mm
2"
MIN. TO WALL
51mm
LAVATORY ROUGH-IN
32mm
1
1
4
"
MIN
SB-1041 ROUGH-IN DIAGRAM
ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) UNLESS
OTHERWISE SPECIFIED. DIMENSIONS SUBJECT TO
CHANGE WITHOUT NOTICE.
  • Page 1 1
  • Page 2 2

Speakman SB-1041 Installation guide

Speakman
Brand
Speakman
Model
SB-1041
Type
Installation guide
This manual is also suitable for

Speakman SB-1041-BN is a high-quality faucet designed for durability and ease of use. It features an adjustable flow rate of 1.5 gallons per minute, making it water-efficient without sacrificing performance. The faucet's 9/16"-24 UNF inlet threads and 3/8" compression fittings make it easy to connect to most standard plumbing systems. Additionally, the included mounting hardware ensures a secure installation. The Speakman SB-1041-BN is a great choice for both residential and commercial applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents