Zebra L10 Quick start guide

L10
Zebra
Brand
Zebra
Model
L10
Type
Quick start guide

Zebra L10: Enhance Productivity with Advanced Features

The Zebra L10 comes equipped with a range of features designed to optimize your workflow and boost productivity. Its rugged construction and compact size make it ideal for use in demanding environments, while its intuitive user interface and powerful processing capabilities ensure seamless operation. With the ability to capture crisp images, scan barcodes accurately, and connect to various peripherals, the Zebra L10 is a versatile tool for a wide spectrum of applications, including inventory management, asset tracking, and field service.

Zebra L10: Enhance Productivity with Advanced Features

The Zebra L10 comes equipped with a range of features designed to optimize your workflow and boost productivity. Its rugged construction and compact size make it ideal for use in demanding environments, while its intuitive user interface and powerful processing capabilities ensure seamless operation. With the ability to capture crisp images, scan barcodes accurately, and connect to various peripherals, the Zebra L10 is a versatile tool for a wide spectrum of applications, including inventory management, asset tracking, and field service.

L10 Kickstand Quick Start Guide
Top Handle Installed
Install Kickstand
Notice: The information in this publication is subject to change without notice. Zebra
Technologies Corp shall not be held liable for technical or editorial errors or omissions
contained herein nor for accidental or consequential damages resulting from the furnishing,
performance, or use of this material.
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation,
registered in many jurisdictions worldwide. All other trademarks are the property of their
respective owners. ©2019 Zebra Technologies Corporation and/or its aliates. All rights
reserved.
PN: 176029
• If Top Handle is installed
proceed to step (1a).
• Keep Kickstand closed
during installation.
• Place the Kickstand
as shown. Screws are
captive.
Package Contents:
1. Kickstand
2. M3 x 14.3 Silver Screw (2)
• Remove only left bracket of handle.
• Install Kickstand.
• Install left top handle bracket using
the long silver screws provided.
Note: Do not remove
top handle screws from
the right side.
1a
1
Secure Kickstand
• Hand tighten all 10
captive screws.
2
1
1 2
3
4
5
67
8
9
10
Guide de démarrage rapide de la béquille de support pour L10
Poignée supérieure installée
Installer la béquille de support
Remarque: Le contenu de cette publication peut être modié sans préavis. L’entreprise
Xplore Technologies Corp ne peut être tenue responsable des erreurs ou omissions
techniques ou éditoriales dans le présent document, ni des dommages accidentels ou
consécutifs résultant de la fourniture, de la performance ou de l’utilisation de ce matériel.
ZEBRA et l’illustration de la tête de zèbre sont des marques commerciales de Zebra
Technologies Corporation, déposées dans de nombreuses juridictions dans le monde entier.
Toutes les autres marques commerciales appartiennent à leurs propriétaires respectifs.
©2019 Zebra Technologies Corporation et/ou ses liales. Tous droits réservés.
Code produit : 176029
• Si la poignée supérieure est
installée, passez à l’étape
(1a).
• Maintenez la béquille de
support fermée pendant
l’installation.
• Posez la béquille de support
comme indiqué. Les vis sont
imperdables.
Contenu de l’emballage :
1. Béquille de support
2. (2) vis argentées M3 de 14,3 mm
• Retirez uniquement le support gauche de la
poignée supérieure.
• Installez la béquille de support.
• Replacez le support gauche en vous servant
des longues vis argentées fournies.
Remarque: Ne retirez
pas les vis sur le côté
droit de la poignée
supérieure.
1a
1
Fixer la béquille de
support
• Serrez les 10 vis
imperdables.
2
1
1 2
3
4
5
67
8
9
10
  • Page 1 1
  • Page 2 2

Zebra L10 Quick start guide

L10
Zebra
Brand
Zebra
Model
L10
Type
Quick start guide

Zebra L10: Enhance Productivity with Advanced Features

The Zebra L10 comes equipped with a range of features designed to optimize your workflow and boost productivity. Its rugged construction and compact size make it ideal for use in demanding environments, while its intuitive user interface and powerful processing capabilities ensure seamless operation. With the ability to capture crisp images, scan barcodes accurately, and connect to various peripherals, the Zebra L10 is a versatile tool for a wide spectrum of applications, including inventory management, asset tracking, and field service.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents