Rust-Oleum 295387 User manual

Rust-Oleum
Brand
Rust-Oleum
Model
295387
Type
User manual

This manual is also suitable for

TECHNICAL DATA
SRT-01
STOPS RUST
®
ENAMEL SPRAYS
1
Form: GDH-678
Rev.: 022819
Rust-Oleum
®
Stops Rust
®
Enamel Sprays are designed to
provide a durable protective coating with excellent rust
prevention, and excellent resistance to abrasion, fading,
chipping, and dulling. These sprays apply easily, provide
excellent coverage and dry fast to a tough attractive finish.
Rust-Oleum Stops Rust Enamel Sprays are ideal for ferrous,
non-ferrous metal and wood surfaces. It features a comfort
tip with a wider finger pad to reduce fatigue caused by
continuous spraying and an any-angle tip which allows you
to spray at any angle. Not for use on galvanized metal.
PRODUCTS
SKU
DESCRIPTION (12 Ounce Aerosol)
7721830
Gloss Fresh Blue
7722830
Gloss Harbor Blue
7723830
Gloss Navy
7724830
Gloss Sail Blue
7727830
Gloss Royal Blue
7731830
Grass Green
7733830
Gloss Dark Hunter Green
7738830
Gloss Hunter Green
7747830
Gloss Sunburst Yellow
7754830
Gloss Anodized Bronze
7762830
Gloss Sunrise Red
7763830
Gloss Carnival Red
7765830
Gloss Regal Red
7768830
Gloss Burgundy
7770830
Gloss Almond
7771830
Gloss Sand
7775830
Gloss Leather Brown
7776830
Flat Black
7779830
Gloss Black
7783830
Gloss Pewter Gray
7784830
Gloss Charcoal Gray
7786830
Gloss Smoke Gray
7789830
Gloss Canvas White
7790830
Flat White
7792830
Gloss White
7794830
Gloss Antique White
7797830
Semi-Gloss White
7798830
Semi-Gloss Black
214804
Gloss Orange
214085
Flat Brown
214086
Gloss Charleston Green
214087
Gloss Army Green
241235
Gloss Pistachio
241236
Gloss Glacier Blue
PRODUCTS (cont.)
SKU
DESCRIPTION (12 Ounce Aerosol)
245897
Gloss Burnt Orange
248567
Gloss Merlot
248568
Gloss Cherry
248569
Gloss Emerald
248630
Gloss French Roast
248631
Gloss Night Tide
249032
Gloss Khaki
250702
Gloss Pure White
250703
Gloss Cobblestone
250704
Gloss Lobster Red
250705
Gloss Fern
262661
Gloss Dark Walnut
267112
Gloss Kona Brown
269292
Gloss Maui Blue
277239
Gloss Lagoon
284678
Gloss Light Turquoise
298537
Gloss Tuscan Sun
312816
Gloss Rich Jade
312817
Gloss Cambridge Stone
312818
Gloss Deep Slate
312821
Flat Red Rock
350419
Gloss Candy Pink
350420
Gloss Purple
347024
Gloss Cobalt
347026
Gloss Poppy Pink
347027
Gloss Deep Mint
347025
Gloss Willow Green
PRODUCT APPLICATION
Use outdoors or in a well-ventilated area such as an open
garage. Use when temperature is between 50°-90°F (10°-
32°C) and humidity is below 70% to ensure proper drying.
Do not apply to surfaces that, when heated, exceed 200°F
(93°C) or galvanized metal. Avoid spraying in very windy,
dusty conditions. Cover surrounding area to protect from
spray mist.
SURFACE PREPARATION
Remove all dirt, grease, oil, salt and chemical contaminants
by washing the surface with a commercial detergent, or
other suitable cleaning method. Rinse with fresh water and
allow to thoroughly dry. Remove loose paint and rust with a
wire brush or sandpaper. Previously coated surfaces must
be sound and in good condition. Smooth, hard, or glossy
finishes should be scarified by sanding to create a surface
profile.
TECHNICAL DATA
SRT-01
STOPS RUST
®
ENAMEL SPRAYS
2
Form: GDH-678
Rev.: 022819
PRODUCT APPLICATION (cont.)
SURFACE PREPARATION (cont.)
WARNING! If you scrape, sand or remove old paint from any
surface, you may release lead paint dust. LEAD IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS
ILLNESS, SUCH AS BRAIN DAMAGE; ESPECIALLY IN
CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID
EXPOSURE. Wear a NIOSH approved respirator to control
lead exposure. Clean up carefully with a HEPA vacuum and
a wet mop. Before you start, find out how to protect yourself
and your family by contacting the National Lead Information
Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
PRIMING
Use of a Stops Rust
®
Primer provides added corrosion
protection, superior adhesion and hiding and is especially
recommended for bare wood and metal. The following
primers are recommended.
7769830
Rusty Metal Primer
7780830
Clean Metal Primer
2081830
Light Gray Auto Primer
2067830
Red Auto Primer
2089830
Dark Gray Auto Primer
PRODUCT APPLICATION (cont.)
APPLICATION
Shake can vigorously for one minute after mixing ball begins
to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN.
Contact Rust-Oleum. Shake often during use. Hold can
upright 10-16" from surface and spray in a steady back-and-
forth motion, slightly overlapping each stroke. Keep the can
the same distance from the surface. Keep the can in motion
while spraying. Apply 2 or more light coats a few minutes
apart to avoid runs and sags. Do not use near open flame.
DRY AND RECOAT TIMES
Based on 70°F (21°C) 50% relative humidity. Allow more
time at cooler temperatures. Dries tack free in 2-4 hours, to
handle in 5-9 hours and fully dry in 24 hours. Primers may
be top coated immediately. Apply a second coat or clear
coat within 1 hour or after 48 hours.
CLEAN UP
Wipe off tip before storing. Clean up wet paint with Xylene
or mineral spirits. Throw away empty can in trash pickup.
Do not burn or place in home trash compactor.
CLOGGING
If valve clogs, twist and pull off spray tip and rinse it in a
solvent such as mineral spirits. Do not stick a pin or other
objects into the stem.
TECHNICAL DATA
SRT-01
STOPS RUST
®
ENAMEL SPRAYS
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 877∙385∙8155
www.rustoleum.com
Form: GDH-678
Rev.: 022819
PHYSICAL PROPERTIES
ENAMEL SPRAY FINISHES
Resin Type
Oil modified Alkyd
Pigment Type
Varies with color
Solvents
Acetone, N-Butyl Acetate, Aromatic Hydrocarbons
MIR
0.95 Max
Fill Weight
12 ounces
Recommended Dry Film Thickness
(DFT) Per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
6-10 sq.ft./can
(0.6-0.9 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
2-4 hours
Handle
5-9 hours
Recoat
Before 1 hour or after 48 hours
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
156°F (69°C)
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Rust-Oleum 295387 User manual

Rust-Oleum
Brand
Rust-Oleum
Model
295387
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents