Kichler Lighting 43442NI User manual

Brand
Kichler Lighting
Model
43442NI
Type
User manual

Kichler Lighting 43442NI is a versatile lighting fixture designed for indoor use. With its adjustable swivel and multiple stem options, it can be customized to fit various ceiling heights and lighting needs. The fixture features a glass shade that provides diffused illumination, creating a warm and inviting ambiance. Its durable construction ensures longevity, making it a reliable choice for residential or commercial applications.

Kichler Lighting 43442NI is a versatile lighting fixture designed for indoor use. With its adjustable swivel and multiple stem options, it can be customized to fit various ceiling heights and lighting needs. The fixture features a glass shade that provides diffused illumination, creating a warm and inviting ambiance. Its durable construction ensures longevity, making it a reliable choice for residential or commercial applications.

IMPORTANT SAFETY INSTRUCTIONS
LIGHTED BULB IS HOT!
WARNING: To reduce the risk of FIRE or INJURY TO PERSON:
• Turnoffandallowtocoolbeforereplacingbulb.
• BulbgetsHOTQUICKLY!Contactswitchonlywhenturningoff.
• DONOTremaininlightifskinfeelswarm.(Lightisintense,
maycause“sunburn”)
• DONOTlookdirectlyatlightedbulb.
• Keepmaterialsawayfrombulbthatmayburn.
• UseONLYwithwattagespeciedorlower.
• DONOTtouchbulbatanytime,useasoftcloth.Oilfromskin
maydamagebulb.
• DONOToperatexturewithmissingordamagedglass.
NOTE DIRECTION OF SWIVEL IN ACCORDANCE WITH CEILING.
1) Passholeintopofglassoversocket.
2) Threadsocketringontosocket.Tightensocketringto
secureglassinplace.(DONOTovertighten.)
3) Lowershadedownoverxturebody.Fitshadeoverglass.
4) Screwcenterstemintotopofxturebody.
5) Passwirefromcenterstemthroughstemandscrewstemto
topofcenterstem.
NOTE: Threadlockingcompoundmustbeappliedtoall
stemthreadsasnotedwithsymbol(3)topreventaccidental
rotationofxtureduringcleaning,relamping,etc.
6) Passxturewirethroughremainingstemsandscrewstems
together.
7) Passxturewirethroughswiveloncanopyandthread
swivelontotopoflaststem.
8) TURN OFF POWER.
IMPORTANT:Beforeyoustart,NEVERattemptanywork
withoutshuttingofftheelectricityuntiltheworkisdone.
a) Gotothemainfuse,orcircuitbreaker,boxinyour
home.Placethemainpowerswitchinthe“OFF”
position.
b) Unscrewthefuse(s),orswitch“OFF”thecircuitbreaker
switch(s),thatcontrolthepowertothextureorroom
thatyouareworkingon.
c) Placethewallswitchinthe“OFF”position.Ifthexture
tobereplacedhasaswitchorpullchain,placethosein
the“OFF”position.
9) Findtheappropriatethreadedholesonmountingstrap.
Assemblemountingscrewsintothreadedholes.
10)Attachmountingstraptooutletbox.(Screwsnotprovided).
Mountingstrapcanbeadjustedtosuitpositionofxture.
11) Makewireconnections(connectorsnotprovided.)Reference
chartbelowforcorrectconnectionsandwireaccordingly.
12) Pushxturetoceiling,carefullypassingmountingscrews
throughholesincanopy.
13) Threadknurlknobsontomountingscrews.Tightenknurl
knobstosecurexturetoceiling.
14) Insertrecommendedbulb.CAUTION: DONOTtouchbulb
withbarehands.Ifthishappens,cleanbulbwithdenatured
alcoholandalintfreecloth.
15) Slipglasssleeveoverbulb.
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
DateIssued:8/30/13 IS-43442-CB
INSTRUCTIONS
For Assembling and Installing Fixtures in Canada
Pour L’assemblage et L’installation Au Canada
MOUNTINGSTRAP
PATTEDEFIXATION
CANOPY
CACHE
KNURLKNOB
BOUTONMOLETÉ
STEM
TIGE
3
SWIVEL
ROTULE
3
FIXTUREBODY
LUMINAIRE
GLASS
VERRE
BULB
L’AMPOULE
GLASSSLEEVE
MANCHONDEVERRE
SHADE
ABAT-JOUR
SOCKETRING
ANNEAUDELADOUILLE
SOCKET
DOUILLE
SEE OTHER SIDE FOR CANADIAN FRENCH TRANS-
LATIONS.
VOIR L’AUTRE CÔTÉ POUR LES CANADIENS TRA-
DUCTIONS EN FRANÇAIS.
IMPORTANTES CONSIGNES DE SÉCURITÉ
UNE AMPOULE ALLUMÉE EST BRÛLANTE !
AVERTISSEMENT: Pour réduire les risques D’INCENDIE ou DE
BLESSURE:
• Éteindreetlaisserrefroidiravantderemplacerl’ampoule.
• LesampouleschauffentTRÈSRAPIDEMENT!N’éteindrequ’à
l’aidedel’interrupteur.
• NEPASresterdanslalumièresiunesensationdechaleurest
ressentiesurlapeau.(Lalumièreestintenseetpeutprovoquer
descoupsdesoleil).
• NEJAMAISregarderdirectementuneampouleallumée.
• Tenirlesmatériauxàl’écartd’uneampoulepouréviterqu’ils
nebrûlent.
• UtiliserUNIQUEMENTdesampoulesàlapuissancenominale
indiquée(watts)ouàunepuissanceinférieure.
• NEJAMAIStoucherl’ampouleàmainnue,seservird’untissu
doux.L’huiledelapeaupeutendommagerl’ampoule.
PRENEZ NOTE de la direction de la rotule conformément
au plafond.
1) Passerletroudansleverresurladouille.
2) Vissezl’anneaudeladouillesurladouille.Serrerl’anneau
deladouillepourxerleverreenplace.(NEPASserrer
avecexcès).
3) Abaisserl’abat-jourverslebassurleluminaire.Monter
l’abat-joursurleverre.
4) Visserlatigecentraledanslapartiesupérieureduluminaire.
5) Passerleldelatigecentraleàtraverslatigeetvisserla
tigeverslehautdelatigecentrale.
REMARQUE : appliquerlefreinletsurtouslesletsdela
tigeindiquésparlesymbole(3)pourempêcherlarotation
accidentelleduluminairependantlenettoyage,remplacement
delampe,etc.
6) Acheminerlelduluminaireparlestigesrestantesetvisser
lestigesensemble.
7) Acheminerlelduluminaireparlepivotetvisserlepivoten
hautdeladernièretige.
8) COUPERLECOURANT.
IMPORTANT:TOUJOURScouperl’électricitéavantde
commencerletravail.
a) Localiserlecoffretàfusiblesouledisjoncteurdu
domicile.Mettrel’interrupteurprincipalenposition
d’Arrêt.
b) Dévisserleoulesfusibles(oumettreledisjoncteursur
Arrêt)quicontrôlentl’alimentationversleluminaireoula
piècedanslaquelleletravailesteffectué.
c) Mettrel’interrupteurmuralenpositiond’Arrêt.Sileluminaire
àremplacerestdotéd’uninterrupteuroud’unechaîne
connectéeàl‘interrupteur,placercesélémentsen
positiond’Arrêt.
9) Trouverlestrousletésappropriéssurlabarrettede
montage.Vissezlesvisdemontagedanslestrousletés.
10)Visserlabarrettedemontageàlaboitedejonction.(Visnon
fournies).Labarrettedemontagepeutetreajustéepour
conveniràlapositiondel’applique.
11) Connecterlesls(connecteursnonfournis).Sereporterau
tableauci-dessouspourfairelesconnexions.
12) Pousserleluminaireversleplafondenpassantsoigneusement
lesvisdemontageparlestrousdanslecache.
13) Visserlesboutonsmoletéssurlesvisdexation.Resserrer
lesboutonsmoletéspourxerleluminaireauplafond.
14)Introduirel’ampoulerecommandée.ATTENTION:NEPAS
toucherl’ampouleàmainnue.Silapeauentreencontact
avecl’ampoule,nettoyerl’ampouleavecdel’alcooldénaturé
etuntissunonpelucheux.
15)Passerlemanchondeverresurlalampe.
DateIssued:8/30/13 IS-43442-CB
INSTRUCTIONS
For Assembling and Installing Fixtures in Canada
Pour L’assemblage et L’installation Au Canada
Connecter le fil noir ou
rouge de la boite
Connecter le fil blanc de la boîte
A Noir A Blanc
*Au cordon parallèle (rond et lisse)
*Au cordon parallele (à angles droits el strié)
Au bransparent, doré, marron, ou
noir sans fil distinctif
Au transparent, doré, marron, ou
noir avec un til distinctif
Fil isolé (sauf fil vert) avec
conducteur en cuivre
Fil isolé (sauf fil vert) avec
conducteur en argent
*Remarque: Avec emploi d’un fil paralléle
(SPT I et SPT II). Le fil neutre est á angles
droits ou strié et l’autre fil doit étre rond ou
lisse (Voir le schéma).
Fil Neutre
SEE OTHER SIDE FOR ENGLISH TRANSLATIONS.
VOIR L’AUTRE CÔTÉ DES TRADUCTIONS EN ANGLAIS.
MOUNTINGSTRAP
PATTEDEFIXATION
CANOPY
CACHE
KNURLKNOB
BOUTONMOLETÉ
STEM
TIGE
3
SWIVEL
ROTULE
3
FIXTUREBODY
LUMINAIRE
GLASS
VERRE
BULB
L’AMPOULE
GLASSSLEEVE
MANCHONDEVERRE
SHADE
ABAT-JOUR
SOCKETRING
ANNEAUDELADOUILLE
SOCKET
DOUILLE
  • Page 1 1
  • Page 2 2

Kichler Lighting 43442NI User manual

Brand
Kichler Lighting
Model
43442NI
Type
User manual

Kichler Lighting 43442NI is a versatile lighting fixture designed for indoor use. With its adjustable swivel and multiple stem options, it can be customized to fit various ceiling heights and lighting needs. The fixture features a glass shade that provides diffused illumination, creating a warm and inviting ambiance. Its durable construction ensures longevity, making it a reliable choice for residential or commercial applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents