Camco 08763 Installation guide

Brand: Camco

Model: 08763

Type: Installation guide

RV Gas Pilot-Thermocouple

Assembly Instructions

TO INSTALL:

1. Attach pilot assembly to main burner with screw (Fig. A-5);

tighten securely. Pilot flame spreader should be

approximately 1/8" from end and side of main burner.

2. Install assembly onto combustion tube with screw (Fig. A-2);

tighten securely.

3. Secure thermocouple lead (Fig. A-3) to control. This is a flexible

tube and can be bent to fit. CAUTION: Do not bend this lead

within 1/2" of either end. Tighten finger-tight plus 1/4 turn

with wrench.

4. Firmly tighten pilot gas line to control.

5. Position air shutter and insert screw (Fig. A-1).

6. TURN ON GAS SUPPLY and turn control to pilot position

(push button if applicable).

7. NOTE: CHECK all connections for leaks using Camco Gas

Leak Detector (10322, 10323, 10324) or equivalent prior to

using equipment.

8. Adjust main burner per instructions.

Stock # 08783 RV Gas Pilot Assembly

Replaces Atwood #91603 and #91214

Stock # 08773 RV Gas Pilot Assembly

Replaces Atwood #92616 and #91603

RV GAS PILOT ASSEMBLIES

Stock # 08763 RV Gas Pilot Assembly

Replaces Mor Flo #690-0755 and #320-0069

Fig. A

Thermostat Control Valve

Pilot Assembly

A - 2

A - 5

A - 4

A - 1

A - 3

Fig. B

3/8"

5/8"

NOTE: Robertshaw pilot assembly #08773 gas tubing mounts on left

side of burner tube. Robertshaw pilot assembly #08783 gas tubing

mounts on right side of burner.

NOTE: If your burner does not have a mounting hole on right side, drill

a 3/16" hole, as shown below.

TO REMOVE:

1. SHUT OFF GAS SUPPLY and turn gas thermostat control valve to

OFF position.

2. Remove air shutter screw (Fig. A-1) and slide air shutter to right.

3. Remove main burner screw (Fig. A-2).

4. Unscrew thermocouple lead (Fig. A-3).

5. Unscrew pilot gas line (Fig. A-4).

6. Remove burner and pilot assembly from water heater. Pilot

assembly can now be separated from main burner by removing

screw (Fig. A-5).

z884015 #1008

Camco Manufacturing, Inc.

121 Landmark Drive / Greensboro, NC 27409

1-800-334-2004 / www.camco.net

Camco 08763 Installation guide

Camco 08763 Installation guide

Camco 08763 Installation guide

Related papers

Other documents