Nordmende WMI1470WH User manual

Brand: Nordmende

Model: WMI1470WH

Category: Washing machines

Type: User manual

INTEGRATED WASHING MACHINE

USER MANUAL

WMI1470WH

Read these instructions carefully before using your

washing machine and keep it safe.

If you follow the instructions, your appliance will provide

you with many years of good service.

SAVE THESE INSTRUCTIONS CAREFULLY

Contents

Safety Precautions

Safety Precautions .............................................................

Overview of Washing Machine ...........................................

Install Washing Machine ....................................................

Operate Washing Machine .................................................

Checklist and Preparation before Washing Clothes ............

View of Control Panel ........................................................

..........................................................................

Table of Washing Programmes ......................................................

Maintenance .......................................................................

.....

Select Programme

Cleaning and Maintenance of Washing Machine Cabinet

Troubleshooting ...............................................................

Remove Problems

Appendix ...........................................................................

Care Label.................................................................

Product Specifications ...............................................

Product Fiches...........................................................

Built-In Installation.........................................................

− If the supply cord is damaged, it must be replaced by the

manufacturer, its' service agent or similarly qualified

persons in order to avoid a hazard.

− The new hose-sets supplied with the appliance are to be

used, the old hose-sets must not be reused.

− This washing machine is for indoor use only.

−

The openings must not be obstructed by a carpet.

This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

he use of the appliance in a safe way and understand the

hazards involved. Children must not play with the

appliance. Cleaning and user maintenance may not be

carried out by children without supervision.

− This appliance is not intended for use by persons

(including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instructions concerning

use of the appliance by a person responsible for their

safety. Children should be supervised to ensure that they do

not play with the appliance.

− Unplug from the power socket before cleaning or

maintenance.

− Make sure that all pockets in the clothing are emptied.

Safety Precautions

..........................................................................

Safety Precautions

− Sharp and rigid items such as coinV,broochHV,nailV,screwV or

stoneV etcmay cause serious damages to this machine.

− Please check whether the water inside the drum has been

drained before opening the door. Please do not open the door if

there is any water visible.

− Pets and children may climb into the machine. Check that the

machine is empty before every operation.

− The glass door may be very hot during the operation. Keep

children and pets far away from the machine during operation.

− Take care that input power voltage and frequency are identical to

those of the washing machine.

− Do not use any socket that the current is rated less than that of

washing machine. Never pull out the plug with wet hands.

− To ensure your safety, the power cord socket must be inserted

into an earthed three-pole socket. Check carefully and make sure

that your socket is properly and reliably earthed.

− Children of less than 3 years should be kept away unless

continuously supervised.

− Children should be supervised to ensure that they do not play

with the machine.

− Packing materials may be dangerous to children. Please keep all

packing materials (plastic bags, foams etc) far away from

children.

− This washing machine may not be installed in bath room or very

wet rooms, as well as in the rooms with explosive or caustic

gases.

− Make sure that the water and electrical devices are

connected by a qualified technician in accordance with the

manufacturer's instructions and local safety regulations.

− Before operating this machine, all packaging and transport

bolts must be removed. Otherwise, the washing machine

may be seriously damaged while washing clothes.

− Before washing clothes for first time, the washing machine

needs to be run once without any clothes, to remove any

residues from the manufacturing process.

− Washing machines with a single inlet valve only, can be

connected to the cold water supply. Washing machines

with double inlet valves can be connected to the hot and

cold water supplies.

− Your washing machine is only for home use and is only

designed for the textiles suitable for machine washing.

− Flammable and explosive or toxic solvents are forbidden.

Petrol and alcohol etc. can not be used as detergents.

Please only select detergents suitable for machine

washing.

− It is forbidden to wash rugs in this washing machine

− Take care when the washing machine is draining the hot

washing water. Do not touch the outlet hose as there is a

danger of burning.

− Never refill the water by hand during washing.

− After the cycle is completed, wait for two minutes to open

the door.

P.07

Safety Precautions

Overview of Washing Machine

Inlet pipe

H (optional)

Inlet pipe

Transport

plughole

Outlet hose

(optionalsupport )

Component

Accessories

Door

Detergent Drawer

Control Panel

Power Plug

Outlet Hose

Detergent Box

− Do not climb onto the machine or sit on top of it.

− Do not lean against the machine door.

− Please do not close the door with excessive force. If it is

found difficult to close, check if there is an excessive amount

of clothes in the drum or if there are clothes in the way,

remove accordingly.

− This household washing machine is intended to be built-in.

− Cautions during transportation -

• Transport bolts need to be reinstalled to the machine

by a specialised person.

• The accumulated water needs to be drained out of

the machine.

• Handle the machine carefully. Never pick up the

machine by protruding parts, such as the machine

door, drawer or knobs.

Notes on disposal:

This marking indicates that this product should not be

disposed with other household wastes throughout the

EU. To prevent possible harm to the environment or

human health from uncontrolled waste disposal, recycle

it responsibly to promote the sustainable reuse of

material resources. To return your used device, please

use a WEE drop off area or contact the retailer where

the product was purchased.

H plug

( )

ole

optional

Install Washing Machine

Install Inlet Pipe

1.Connect the elbow to the tap and fasten it clockwise.

Notes: after connection, if there are any leakages in the hose, repeat the

steps to connect the inlet pipe. Check that hose hasn't been kinked or

crushed. Do not modify or sever the water inlet hose.

Unpacking the washing machine

Unpack your washing machine and check if there has been any damage during the

transportation. Also make sure that all the items (as shown on Page 7) in the attached bag are

received. If there is any damage to the washing machine during the transportation, or if there are

any items missing, please contact the NordMende customer service team.

Dispose the packing materials

The packing materials of this machine may be dangerous to children. Please dispose of

them properly so that they are out of the reach of children. Dispose the related packing

materials according to the relevant local regulations. Please do no throw the packing

materials away together with daily household rubbish.

Remove transport bolts

Before using this washing machine, transport bolts

must be removed from the underside of this machine.

Please take the following steps to remove the bolts:

1. Loosen all bolts with a spanner and then remove them.

2. Plug the holes with transport hole plugs.

3. Keep the transport bolts safely for future use.

Select the location

Before installing the washing machine, the location characterised as follows shall be

selected:

- Rigid, dry, and level surface (if not level, please make it level by referencing the

following figure “Adjust Leg”)

- Avoid direct sunlight

- Sufficient ventilation

- Room temperature is above 0 C

- Keep far away from heat sources such as coal or gas.

- Make sure that the washing machine is not standing on the power cord.

- Do not install the washing machine on a carpeted floor.

Adjust Leg

1. When positioning the washing machine, check

that the legs are screwed up to their shortest

point. If not, please turn them to their original

positions with your hand or spanner and tighten

the nuts with a spanner.

2. After positioning the washing machine, press

all four corners on the front of the machine in

sequence. If the washing machine is not stable

when pressed, adjust the appropriate leg.

3.Loosen the lock nut with spanner and turn the leg by hand until it closely contacts the floor. Press the

leg with one hand and fasten the nut closely to the underside of the machine with the other hand.

4.After being locked properly, press all four corners of the machine again to make sure that it has been

adjusted properly. If it is still unstable, repeat steps 2 and 3.

Raise

Lower

Lock nut

foot

Connect the inlet pipe as indicated, between an ordinary tap and inlet hose.

Connect Water Supply Hose

− To prevent leakage or water damage, follow the instructions in this chapter.

− Do not kink, crush, modify or sever the water inlet hose.

− For the models equipped with a hot valve, connect it to hot water tap with hot water supply hose.

Energy consumption will decrease automatically for some programmes.

P.10

Install Washing Machine

1.This machine must be earthed properly. If there is a short circuit, earthing can reduce the

danger of electrical shock.

This machine is equipped with a power cord, which includes a plug, earthing wire at earthing

terminal.

2.The washing machine can only be operated in a circuit separate from other electrical

appliances. Otherwise a power protector may be tripped or fuse may be burned out.

Operating The Washing Machine

Checklist and Preparation before Washing Clothes

Please read this operation method carefully to avoid problems with your washing machine and

damaging clothes.

Check if first-washed clothes will colour run.

In order to determine if the colour is fixed on an item of clothing, use a white towel soaked in a little

liquid detergent to rubbed an area of the clothes that will not be seen. If the white towel is stained

with the clothes original colour, the dye will run into other

clothes. Wash this item of clothing separately on its own

prior to washing with other items.

Tips:

Prior to washing, stained clothes should be

rubbed gently with liquid detergent into the stains.

Separate colours from whites when washing.

Temperature-sensitive clothes need to be washed as per recommendation on the label.

If the label on a garment states that it is "dry clean only", do not machine wash.

Keep in Mind:

Never leave washed clothes in washing machine for a long period of time. Otherwise they may get

moldy and cause mildew. Please remove the clothes from the washing machine in a timely

manner. The clothes may also get discoloured or distorted if they are not washed according to the

stated washing temperature.

！

WARNING

Electrical Connection

- As the maximum current through the unit is 10A when you are using its heating function, please

make sure the power supply system (current, power voltage and wire) in your home can meet

the normal loading requirements of the electrical appliances.

- Please connect the power to a socket which is correctly installed and properly earthed.

- Make sure that the power voltage is same to that in the machine's rating label.

- The power plug must match the socket and the connection must be properly and effectively

earthed.

- Do not use multi-purpose plugs or extension cords.

- Do not connect or unplug with wet hands.

- When connecting and pulling out the plug, hold the plug tightly and then pull it out. Do not pull

by the power cord forcibly.

- If the power cord is damaged or has any sign of being broken, a replacement power cord must

be sourced from the NordMende service department.

Connect the end of the drain hose to the waste water outlet

• Do not kink or protract the drain hose.

• Position drain hose properly, otherwise damage might result in water

leakage.

Waste Water

Outlet

！

WARNING

Install Drain Hose

P.12

P.13

Operate Washing Machine

Wrinkle-style, embossed clothes etc. may get distorted when immersed in water. Wrinkle-style silk,

fur products and fur decorations are also easily distorted.

Clothes with decoration, long dresses etc are products that decolourise easily.

Do not wash clothes without consulting the material label washing requirements.

Never wash clothes stained with the chemicals such as petrol, petroleum, benzene, paint thinner or

alcohol.

Detergents

Do not use hand wash detergent, “low-sudsing” liquid detergent or washing powder should only be

used. Otherwise, excessive bubbles may be generated and will overflow out of the drawer and

cause flooding and damage.

The detergent should be selected according to the fabric of the clothing (cotton, synthetic fiber, soft

products and wool products), colours, washing temperatures, level of dirt etc.

Bleach damages clothes, so it is suggested to use as little as possible.

Powder detergents can leave residues on clothes which can also generate bad odors, it is important

to make sure that they are sufficiently rinsed.

Powder detergent does not easily dissolve completely if there is too much detergent or if the water

temperature is too low. It can remain in clothes, pipes and washing machines and pollute the

clothes.

Washing shall follow the weight of the clothes, the level of soiling, local water hardness as well as

the recommendations from the detergent manufacturers. Please consult the water company if you

are not clear of the water hardness in your area.

Notes:

Keep detergents and additives in a safe and dry place out of the reach of children.

Empty all pockets prior to washing

Check the pockets of all clothing prior to being

washed. Empty any rigid items such as coins,

hair clips, keys, pens etc otherwise the washing machine

may be damaged.

For clothes to be washed, they need to be classified

according to the the characteristics on the label.

The symbols on care labels generally fall under the following -

cotton, blended fabrics, synthetic fabrics, silk, wool and artificial fibers.

Separating and Sorting the Load:

• Clothes need to be sorted before being put into the washing machine -

• Colour: Whites and colourful clothes need be identified and separated. All new colourful

articles need to be washed for the first time on a cycle alone.

• Size: Clothing of different sizes should be washed together to increase the washing

efficiency.

• Sensitivity: Soft articles need to be washed separately, for example wool fabrics, curtains

and silks. The delicates programme needs to be selected. Check the labels on all washing

articles.

• Curtains with hooks should have all of the hooks removed before being washed.

• Clothing with decorations, buttons or embroideries, need to be turned inside out before they

are washed. Warning: Decorations on clothes may be damaged during a washing cycle.

• Zips should be zipped up and buttons or hooks should be closed. Loose bands or ribbons

should be bound together.

！

It is suggested to put bras into a pillowcase

prior to washing and tie closed to prevent the steel

wire from popping out of bras and damaging the

machine.

Especially delicate textiles such as lace curtains,

small items such as tights, socks, handkerchiefs,

ties etc. should be put into string bag and sealed for

washing.

When washing single bulky items such as towels, jeans,

quilted jackets etc. it may easily cause unbalance due to

increased eccentricity. Therefore it is suggested to add one

or two more items of clothing to the wash, so that draining

can be done smoothly.

Items that are easily stained such as white sockets, collars, sleeves etc. should be hand

washed before being put into the washing machine, to achieve more ideal washing results.

When using powdered detergents or additives, it is suggested to use some water to dilute the

powder in order to prevent the inlet of the detergent box from being blocked and overflowing

while filling with water.

To protect baby skin

Baby clothes and towels, including towel nappies should be washed separately. If they are

washed together with adult clothing on normal cycle, the detergent may cause irritation to the

babies skin. The baby care programme increases the rinsing time to ensure the thorough

rinsing and cleaning of the fabric, by removing all detergent residues.

P.14

P.15

Operate Washing Machine

Confirm the washing capacity:

Do not overload the washing machine, otherwise it may affect the washing efficiency or damage

the machine. Please consult the below table, for the maximum loading capacity.

• Clothes that easily develop lint balls need to be turned inside out

• Clothes that shed fibres need to be washed separately, otherwise other items in the wash

will be covered in these fibres.

• Preferably black and cotton clothes need to be washed separately.

Washing Waterproof Materials

The washing machine is not designed to wash waterproof materials (ski suits, waterproof table

cloths, shower curtains etc). Similarly for fabrics that cannot easily absorb water, such as semi

waterproof cushions and clothes, it is better not to machine wash. Washing waterproof / semi

waterproof fabrics can cause leakages and or abnormal vibrations, while also damaging the

fabrics.

Delicate

Cotton

Synthetics

Wool

7.0kg Washing Machine

7.0kg

3.5kg

2.0kg

2.5kg

Maximum Load Capacity

Quick start

1 Install the washing

machine

7 Select the desired

programme

5 Close the door

8 Press the [start/pause]

button

4 Measure out the

detergent

3 Open the door &

load the laundry

6 Press the

On/Off

2 Separate &

sort the laundry

View of Control Panel

otes:

1.The control panel line chart is for reference only, please refer to the real product as standard.

2.The control panel could be changed without written notice.

Start/Pause

Press the button to start or

pause the wash cycle.

On/Off

Press once to turn the washing machine on,

press again to turn the washing machine off.

Programme

For the convenience of users to wash

clothes with different programmes.

LED Display

Display the Pre Wash/Extra rinse/Remain

time /Door lock/Child lock running state.

Temp

Press the button to regulate

the temperature.

Speed

Press the button repeatedly to

regulate the speed.

Delay

It is used to delay a wash (0-24h). The delaying

time means the wash will begin in 《xx》hours.

Function

Press the button repeatedly to set the Pre Wash,

Extra Rinse function.

P.16

P.17

Operating Washing Machine

- Cotton 60/40/20℃

You can select this programme to wash daily clothes. The washing period is quite long with

a strong washing cycle. The temperature is defaulted to 60/40/20 ℃

- Express 15'

This programme is suitable for washing a few items of clothing that are not very dirty in 15'.

- Hand Wash

This programme is for items of clothing that are made of fabric that can easily shrink in hot water as

the default temperature is cold. Clothes can only be lightly soiled.

- Baby Care

You can select this programme to wash your baby’s clothes, it can make the baby's wear cleaner

and make the rinse performance better to protect the baby skin.

- Sports

Select this programme to wash sportswear.

- Synthetic

Select this programme to wash quite delicate clothes. The programme is shorter in comparison to

that for cottons and the washing cycle is quite gentle. It is recommended to use this programme to

wash synthetic articles, for example: shirts, coats, small curtains and laced textiles, etc. While

washing knitted textiles, the detergent quantity needs to be reduced due to its loose string

construction which easily forms bubbles.

- Mix(Mixed)

Especially for mixed items of laundry made of various hard-wearing and easy-care fabrics, that

need much more time. It is used for the daily clothes, such as sheets, pillowcases, bathrobes and

underwear.

- Wool

You can select this procedure to wash wool textiles labeled with “Machine Wash”. Please select

the proper washing temperature according to the label on the article of clothing. The correct

detergent needs to be selected for wool textiles.

1. Turn the rotary switch to select the corresponding programme according to the types of

textiles.

2. Select the correct temperature according to the level dirtiness. Generally the higher the

temperature is, the more the power is consumed.

3. Select the correct revolution speed. The higher the revolution speed is, the drier the

textiles are spun, however the noise level will increase. The surfaces of delicate textiles

will have wrinkles and the working life of washing machine will be shortened.

PLEASE NOTE: to protect the clothes, a lower revolution speed needs be selected for delicate

textiles.

The washing programme depends on the types of the clothes that are being washed

the below:

Cotton Intensive

You can select this programme to wash daily washable clothes. The washing period is quite long

with a strong washing cycle. It is recommended to wash daily cotton articles on this programme, for

example: bed sheets, quilt covers, pillowcases, underwear etc.

Operate Washing Machine

Washing Clothes at the first time

Before washing clothes for the first time, a cycle needs to be run with out any clothes.

1. Connect power source and water.

2. Put a little detergent into the box and close it.

3. Press the “On/Off” button.

4. Press the “Start/Pause” button.

The drawer is separated as follows:

I: Pre-detergent or washing powder.

II: Main detergent.

: Washing additive, such as fabric softener.

Put the Detergent into the Washing Machine

1. Pull out the drawer.

2. Fill pre-detergent into case I (when necessary).

3. Fill detergent into case II.

option 1: detergent (powder) option 2 (liquid)

1. Fill softener into case (when necessary).

− When using powdered detergents or additives, it is suggested to use some water to dilute, in order to

prevent the inlet of the detergent box from being blocked and overflowing while filling with water.

− Please choose a suitable type of detergent for the various washing temperatures, to get the best

washing performance with less water and energy consumption.

Sart up the Washing Machine

Connect the power. Check if water pipes are connected properly.

Put in the clothes to be washed and fill the

detergent box. Press the button

“On/Off”, select the appropriate programme and press the button “Start/

Pause”.

Select the Programme

The appropriate programme should be selected according to the types, quantities and dirtiness of the

clothes to be washed, in combination with the following washing temperature table.

90 ℃

60 ℃

Very dirty items. Cotton or flannel (for example: table cloths, towels, bed

sheets)

Quite dirty item.

Moderately dirty items.

40 ℃ 30 ℃

Cold water20 ℃,

Ⅰ

Ⅱ

Notes:

Operate Washing Machine

P.18

P.19

- Child Lock

To avoid the washing programme being disturbed by children the "Child Lock" function can be

selected. When selected all buttons except for the "On/Off" button cannot work, in this state the

machine powers off when the "On/Off" button is pressed. When the "On/Off" button is selected "Child

Lock" function and the programme that was running prior to being powered off will be remembered.

To set the "Child Lock" function press “Temp” and “Speed” together for 3 seconds the buzzer will

beep. The

"Start/Pause" button as well as the rotary switch will be locked. Press the two buttons again for 3

seconds and buzzer will beep, to release the lock. If there is a power cut the "Child Lock" will not be

canceled until all programmes are completed.

- Turning off the Buzzer

This is an additional buzzer function on your appliance. 2QFHWKHbuzzer functionLVGHDFWLYDWed, the

buzzer will QRORQJHUVRXQG

After starting the machine press the “TemS” button for 3 seconds and you will hear a beep, then the

buzzer will be WXUQHGRII. To restart the buzzer function press the “Temp” button again for 3 seconds.

The setting will be kept until the next reset.

Warning: After deactivating the buzzer function, the sounds will not be activated any more.

- Bubble Removal Function

Bubble Check Function: Extra bubbles will occur when there is an excessive amount of detergent,

which will affect washing and rinsing. When selected, the programme will check the status of the

water and if required the bubble removal cycle will be added automatically to remove bubbles when

excessive bubbles are present.

Operate Washing Machine

- Delicate

Select this programme to wash your delicate clothes. The washing cycle is more gentle and the

revolution speed is less in comparison to the “Synthetic” programme. This programme is for

particularly delicate fabrics such as machine-washable silk, satin and viscose. It is recommended that

you do not wash these fabrics together with other rougher fabrics. The use of detergent for delicates

is recommended.

- Drain Only

Separate drain only programme.

- Spin Only

Separate spin only programme. Soapy water or rinse water will be drained out before spinning.

- Rinse & Spin

Separate rinse & spin programme.

- My Cycle

Press the "Speed" button for 3 seconds for my cycle to remember the programme. The default my cycle

programme is cotton intensive.

The main functions can be selected as follows:

- Prewash

The prewash function gives an extra wash before the main wash.

- Extra Rinse

The laundry will undergo an extra rinse when this function is selected.

- Delay

The delay function can be set with this button, the delaying time is between 0-24H.

Set the Delay Function:

1. Select a programme;

2. Press the "Delay" button several times to choose the length of time.

3. Press Start/Pause to commence the delay operation.

Cancel the Delay Function:

1. Press the "Delay" button until the display shows 0H. It should be

pressed before starting

the program. If the programme has already started, you should press press the On/Off

button. Notes: If there is any break in the power supply while the machine is operating, a

special

memory stores the selected programme and when the power is restarted, the

remaining time continues.

P.20

P.21

Before commencing any maintenance on your machine please unplug the power plug or

disconnect the power supply and close the water tap.

- To avoid damaging the washing machine do not use solvents in the washing machine. Solvent may

also generate toxic gases or cause explosions.

- Never spray the washing machine with water to wash it.

- It is forbidden to use detergents containing PCMX to clean the washing machine.

Cleaning and Maintenance of Washing Machine Cabinet

Proper maintenance on the washing machine can extend its working life. The surface can be cleaned

with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a

damp cloth to wipe it off immediately. Do no to strike the cabinet with any sharp objects.

Notes: formic acid and its diluted solvents or equivalent are forbidden from use on the inside or

outside of the appliance.

Clean Internal Drum

If rust is left inside the drum by the metal objects, it needs to be removed immediately with a

chlorine-free detergent.

Never use steel wool.

Defrost Frozen Washing Machine

When the temperature drops below zero your washing machine may freeze, follow the below -

1.Disconnect the power supply of the washing machine.

2.Wash the tap with warm water to loosen the inlet pipe.

3.Remove the inlet pipe and immerse it in warm water.

4.Pour warm water into the washing drum and wait for 10 minutes.

5.Reconnect the inlet pipe to the tap and check whether the inlet and outlet are working normally.

Notes: when the washing machine is reconnected, make sure the ambient temperature is above 0 C

If your washing machine is located in the room where it can freeze over easily, please drain the

remaining water inside the drain and inlet pipe thoroughly.

Remove the remaining water inside the inlet pipe

1.Close the tap.

2.Screw off the inlet pipe from the tap and put the end into

a container.

3.Start up any programme except a single "Wash" or "Drain" programme.

Water will drain out of the inlet pipe if any for about 40 seconds.

4.Reconnect the inlet pipe to the tap.

Remove the remaining water in the drain pump

To avoid burning this shall be done after the hot water inside the machine cools down.

Maintenance

Operate Washing Machine

Table of Washing Procedures

Load(kg)

Detergent Box

Procedure

Description

Default Speed

(RPM)

Default Time

(H)

Cotton Intensive

Default Temp.

(℃)

Sports

Mixed

Drain Only

Spin Only

Rinse&Spin

Hand Wash(Eco)

Cold

Express15'

Wool

Delicate

The energy class is A++(6.0kg),A+++(7.0/8.0) Energy test program: Cotton 60/40℃ Speed: the highest speed; Other as the default.

Half load

for 6.0/7.0/8.0Kg machine:3.0/3.5/4.0Kg.

“Cotton 60/40℃ ” are the “standard Cotton 60/40℃” programme and the standard washing programs to which the information in the label

and the fiche relates, and they are suitable to clean normally soiled cotton laundry and that they are the most efficient programmes in

terms of combined energy and water consumptions for washing that type of cotton laundry,that the actual water temperature may differ

from the declared cycle temperature.

●　Means must ○　Means optional Means not necessary

Notes: The parameters in this table are only for user's reference. The actual parameters maybe different with the parameters in above mentioned table.

Synthetic

Cotton 60℃

Cotton 40℃

Cold

Baby care

Delay

Softener

Case

8.0

4.0

8.0

2.0

8.0

2.0

2.5

4.0

8.0

2.0

8.0

6.0

3.0

6.0

7.0

2.0

6.0

2.0

2.5

3.0

6.0

2.0

6.0

1400

800

1000

800

400

600

800

1200

800

1000

1200

Prewash

Extra rinse

1200

800

1000

800

400

600

800

1000

800

1000

2:40

1200/1400

1:19

1:13

0:01

0:14

0:31

1:00

1:13

1:06

1:00

1:40

1:47

1:32

0:15

1:39

Cotton 20℃

7.0

3.5

7.0

2.0

7.0

2.0

2.5

3.5

7.0

2.0

7.0

P.23P.22

Maintenance

Unplug to avoid electrical shock before washing.

After using the washing machine close the door tightly to avoid pinching children.

Remove foreign matters

Drain Pump Filter:

The rain pump filter can filter threads and small foreign objects from the washing machine.

Clean the filter periodically to ensure the normal operation of the washing machine.

According to the soil level within the cycles and the frequency of the cycles, you need to inspect

and cleanliness of the filter regularly.

The pump should be inspected if the machine does not empty and/or spin;

If the machine makes an unusual noise during draining, objects such as safety pins, hair clips,

coins etc. be blocking the pump.

Follow the below procedures to clean the pump filter:

Warning!

When the appliance is in use and depending on the programme selected there can be hot water

in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance

has finished the cycle and is empty. When replacing the cover, ensure that it is securely

retightened to avoid leakages.

2.Turn the filter down as

shown in the figure and take

out any foreign objects.

1.After the power is dis-

connected, pull out the

Dam-Board.

3.Reinstall each part back

after the foreign objects

have been removed.

Dam-Board

Maintenance

Clean detergent box and grooves

1.Press down on the arrow location on the softener cover

inside the drawer.

2.Lift the clip up and take out the softener cover and wash

all grooves with water.

3.Replace the softener cover and push the drawer back

into position.

Clean inlet filter

The inlet filter needs to be cleaned if there is insufficient

water when the tap is opened.

1.Close the tap.

2.Select any programme except “Wash” or “Drain”

only.

3.Press the “Start/Pause” button and keep the

programme running for about 40 seconds.

4.Remove the inlet pipe from the tap.

5.Use water to wash the filter.

6.Reconnect the inlet pipe.

Washing the filter in the washing machine:

1.Screw off the inlet pipe from the backside of the

machine.

2.Pull out the filter with a long nose pliers and reinstall it

back after being washed

3.Reconnect the inlet pipe.

4.Open the tap and make sure there is no water leakage.

5.Close the tap.

Notes: Generally the tap filter is washed first and then wash the filter in the washing machine.

If only the filter is washed in washing machine, then the steps 1-3 in cleaning the tap filter

needs to be repeated.

P.24

P.25

Door lock

problem

Door is not closed properly.

Restart after the door is closed.

Reason

Solution

Description

Display

LED

Please call up the service line if there are still issues.

Drain problem

while washing

Water injecting

problem while

washing

Tap is not opened or water

flow is too slow.

Inlet valve filter is blocked.

Inlet pipe is twisted.

Water is not supplied.

Open the tap or wait till the

water supply becomes normal.

Check the inlet valve filter.

Straighten the water pipe.

Check other taps in the room.

Please call up service line if there are still issues.

Please call up the service line if there are still issues.

Outlet hose is blocked or twisted

Drain pump is blocked.

Wash and straighten outlet hose.

Wash and drain the pump filter.

Please call up the service line if there is any other problems.

Remove the problems

Troubles

Reason

Solution

Washing machine

cannot start up

Check if the door is closed tightly.

Check if the power plug is inserted.

Check if the water supply tap is open.

Check if the “Start/Pause” button is pressed.

Check if “On/Off” button is pressed.

Door cannot be

opened

Heating fault

Water leakage

Water is

overflowing from

the bottom of the

machine

Indicator or

display does

not light.

Detergent

residues in the

box

Washing effects

are not good

Abnormal noise

Great vibration

The clothes are too dirty.

Insufficient detergent quantity.

Washing powder is dampened

and agglomerated.

The power is disconnected.

The PC board has problems.

There is a power supply

problem

The inlet pipe is not connected

firmly.

Outlet hose has a water leakage.

NTC is damaged and heating

pipe is aging.

Machine's safety protection

design is working.

The connection between the inlet pipe

or outlet hose and tap or washing

machine is not tight. The drain pipe

entering the room is

blocked.

Disconnect the power and reconnect.

Should be able to wash clothes on a cold cycle,

but cannot

be wash with heated water. Contact

the service centre promptly.

Check and fasten water pipes.

Clean the outlet hose and ask a specialised

person to repair it when necessary.

Fix the inlet pipe.

Replace the drain hose.

Che

ck if the power i

s shut down a

power plug is connected correctly. If

not, please call the service line.

Clean and wipe the detergent box.

Use liquid detergents or dilute thick

powdered detergents.

Select a the correct programme.

Add the proper detergent quantity

according to the instructions on the

detergent package.

Check if the fixing (bolts) have been removed.

Check if the appliance has been installed on a

solid and level floor.

Check if there are any metal articles inside the

machine.

Check if the legs on the washing machine are

adjusted and level.

Troubleshooting

Dimension (WxDxH)

Net Weight

Rated Power

MAX.Current

Standard Water Pressure

Washing Capacity

Power Supply

Product Specifications

595* 540*825

63kg

2000W

10A

0.05MPa~1MPa

7.0kg

220-240V~,50Hz

P.26

P.27

The label and sign on the fabric can help you to choose the best way to wash your clothes.

Iron

Do not iron

Dry clean

Do not dry clean

Warm iron.medium

(max 150℃)

Cool iron(max 110 ℃ )

Dry clean normal cycle

with any solvent

Dry clean normal cycle

petroleum solvent only

Dry flat

Tumble dry normal Drip dry

Hang to dry

/Line dry

Tumble dry. Low heat

(max 110℃)

Tumble dry. Medium

(max 150℃ )

Bleach

Do not bleach

Hand wash

Do not wash

Wa r m w a s h

(max 40℃ )

Chlorine bleach

may be used

Normal wash

Gentle wash

Chlorine bleach

not be used

Do not tumble dry

Iron with cloth

Steam Iron

Dry after wash

Line Dry in shade

Warmly dry clean

No Wring

Line Dry

No machine wash

To avoid fire, electrical shock and other accidents, please remember the following reminders:

- Only the voltage indicated in power label can be used. If you are not clear of the voltage in your

home, please contact the local power supply company.

- When you are using the heating function, the maximum current through the washing machine

will reach 10A. Therefore, please make sure the power supply units (current, voltage and cable)

can meet the normal load requirements for the machine.

- Protect the power cord properly; the power cord must be fitted well so that it will not be a trip

hazard and result in damage. Special attention must be paid to the socket, it must be plugged

into a socket easily.

- Do not overload the wall-mounted socket or use an extension cable. Overloading of the wiring

may cause fire or electrical shock. Do not unplug the power plug with wet hands.

- To ensure your safety the power plug shall be inserted into an earthed three-pole socket.

Carefully check and ensure that your socket is properly and reliably earthed.

Appendix

Care Label

Product Fiche

Off mode power consumption: 0.5W

Left-on mode power consumption: 1.0W

Airborne acoustical noise (washing): 57

Airborne acoustical noise (spinning): 76

Notes: The airborne acoustical noise emissions during the washing/spinning for the

cotton with

60 ℃ programme with a full load.

Notes:

1. Programme setting for testing in accordance with applicable standard EN60456-2011.

2. When using the test programmes, wash the specified load using the maximum spin speed.

3. The actual parameters will depend on how the applicance is used and maybe different with the

parameters in above mentioned table.

Brand: NordMende

Model: WMI1470WH

Rated capacity: 7kg

Energy efficiency class: A+++

EU Ecolabel: N/A

Energy consumption 174kwh per year, based on 220 standard washing cycles for cotton at 60°

C/40°C during a full and partial load and the consumption of the low-power modes. Actual

energy consumption will depend on how the appliance is used.

Water consumption 10000 litres per year, based on 220 standard washing cycles for cotton

60°C /40°C during a full and partial load. Actual water consumption will depend on how the

appliance is used.

Spin-drying efficiency class B on a scale from G (least efficient) to A (most efficient)

Maximum spin speed: 1400rpm

Consumption values (1400rpm) :

Standard Programme

Cotton 60°C

Cotton 40°C

Load

0.82kwh 50L

229min

209min

166min

50%

55%

42L

7kg

3.5kg

Energy

consumption

Water

consumption

Remaining

moisture content

Programme

duration

0.82kwh

0.62kwh

P.32

Built-In Installation

Overview

Before installing the washing

machine, please read this "Built-In Instructions" carefully and

keep it for future reference. This appliance has been designed to be built into the kitchen

furniture. The recess should have the dimensions shown in the below image.

When installing the appliance into your kitchen furniture ensure, if possible, that the hoses are

placed in either of the two recesses on the back of the appliance. This will help to prevent the

hoses from becoming kinked or trapped.

Preparation and assembly of the door

The appliance is originally prearranged for the assembly of a door opening from the right to

left or from left to right.

Door is opening from left to right

P.33

Door is opening from right to left

825mm

600mm

825mm

540mm

595mm

152.5mm

17.5mm

580mm

Built-In Installation

Appendix

Preparation the Fixed position paper

1. Make the marks on the door according to the cupboard and washing machine height.

1.Self-tapping screws

(ST4*12)

2.Self-tapping screws

(M5*12)

3.Hinges

4.Counter magnet

5.Spacer

6.Fixed position paper

Tools Required

2.Automatic Drill

3.Ruler

4.Pencil

Screw Driver

Position Paper

Built-In Installation

2.Installating the hinges and spacer

x the hinges to the washing machine with ST4*12 screws. The hinges can be adjusted to

compensate for possible difference in thickness of the door.

Drill hole on the door

1.Drill the hole on the door according to the fixed position paper.

P.34

P.35

2.Fixed position paper on the door.

Paste on the Door(The door on the right)Shear fixed position paper

Position Paper Position Paper

16- 22mm

12m m

35m m

12m m

2mm

Paste on the Door(The door on the left)

Top Top

Left Op en

Right O pen

Built-In Installation

Installing the magnet

The appliance is prearranged for a magnetic closure of the door. To enable the correct

operation of this device, it is necessary to screw the magnet into the inner side of the door.

Installation

of the door

Nordmende WMI1470WH User manual

Brand: Nordmende

Model: WMI1470WH

Category: Washing machines

Type: User manual

Download PDF

report

Nordmende WMI1470WH User manual

Nordmende WMI1470WH User manual

Related papers

Other documents