MODULARWORKBENCH
Assembly instructions
MESADETRABAJOMODULAR
Insfruccionesde ensamblaje
ETABUMODULAIRE
Instructionsd'assemblage
6' (182.88cm) Workbench
6' (182,88cm) Mesa de lrabajo
#tab, de 6 pi (182,88 cm)
8' (243.88cm) Workbench
8' (243,88cm) Mesa de trabajo
_abli de 8 pi (243,88cm)
TABLEOF CONTENTSIINDICE[rABLE DESMATIERES
WORKBENCH SAFETY ...................................... 2
ASSEMBLY INSTRUCTIONS ............................ 2
Too_sand Parts................................................ 2
Workbench Use Requirements .......................2
Unpack the Workbench................................... 2
InstallLegs and Back Panel............................ 2
Complete the Assembly .................................. 3
Workbench Care.............................................. 3
WARRANTY ......................................................... 3
SEGURIDAD DE LA MESA DE TRABAJO .,.,...4
INSTRUCCIONES DE ENSAMBLAJE ...............4
Piezas y Herramientas......................................4
Requisitos para el uso de la mesade trabajo,4
Desempaque lamesa de trabajo .....................4
Instale ]aspatas y el panel posterior...............4
Complete el ensamblaje ..................................5
Culdado de la mesa de trabajo .......................5
_T_ ........................................................... 5
SI_CURITI_DE L'_-rABU ................................... 6
INSTRUCTIONS D'ASSEM BLAGE...................6
Outlllageet pi_ces n_cessaires....................... 6
Sp6cificetionsd'utilisation de 1'6tabli.............. 6
D6ballage de I'etabli ........................................ 6
Installation des pieds et du panneauartiste,., 6
Fin de I'assemblage......................................... 7
Entretien de 1'6tabli.......................................... 7
GARANTIE ........................................................... 7
WORKBENCHSAFETY
Your safety and the safety of others are very important.
We have provided many importantsafety messages inthis manual and on yourappliance, Always read and obey all
safety messages,
1_ his isthe safety alert symbol,
This symbolalerts you topotential hazards thatcan killor hurt you and others,
Allsafety messages willfollow the safety alert symboland eitherthe word "DANGER" or
"WARNING," These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages willtell you what the potential hazard is,tell you howto reduce the chance of injury,and tell you
what can happen ifthe instructions are not followed.
ASSEMBLYINSTRUCTIONS
Toolsand Paffs
Check that you have everything necessary for correct assembly. Proper
assembly is your responsibility.
Tools Needed:
m %6in. Socket wrench • Adjustable wrench
I 7A6in. Wrench
Parts Supplied:
6 ft. (182.88 cm) Workbench
i Workbench top
m Workbench legs (2 welded sets)
m Leveling legs (4)
m % in. - 20 x3/4in. Back panel
bolts (4)
m % in. x 1_ in. Lag
screws (11)
m % in. Back panel washers (4)
m Back panel
8 ft. (243.88 cm) Workbench
• Workbench top
• Workbench legs (2 welded sets)
• Leveling legs (4)
m 1/4in. - 20 x ¾ in. Back panel
bolts (4)
• %" x 1V2in. Lag screws (12)
• 1/4in. Back panel washers (4)
• Back panel
¼in.-2Ox¾in. BackPanelBolts _'_in.xl_in. LagScrews
V¢orkbench Use Requirements
I intended for use in a garage.
m Maximum weight limitis 1,000 Ibs (453.5 kg) for the workbench.
Unpack the Workbench
1. Unpack the legs and hardware from the box. Verify contents (see
"parts Supplied'_.
2. Remove the back panel and set it aside.
NOTE: Leave the workbench top on the cardboard during
assembly.
3. Remove the protective corners from the workbench top. The bolt
holes should be visible.
Install Legs and Back Panel
1. Place each set of legs on the workbench underside and match the
bolt holes.
2. Attach the back panel first using the 4 back panel bolts and washers
provided, Do not tighten the bolts completely at this time,
3. Attach the legs to the workbench top using the 8 lag screws. The bolt
holesin the legsare ovalto ellow space for minor adjustments asyou
work, Tighten the lag screws using a _s in. socket wrench,
4. Use the remaining lag screws to attach the beck panel to the
workbench top.
5. Using a _6 in. wrench, completely tighten the bolts attaching the legs
to the back panel.
6. Screw inthe levelinglegs. The leveling legs have a flat side designed
for use with an adjustable wrench ifneeded. The legs should be at
least V4in. (0.635 cm) engaged inthe workbench leg.
IMPORTANT= Screw the leveling legs in at least V4in. (0.635 cm)
or a minimum of 5 full turns.
1. Using 2 or more people, stand the workbench upright and place it in
itsfinal location.
2. Adjust the leveling legsas needed.
NOTE: When adjusting the leveling legs, be sure they are at least
V4in. (0,635 cm) engaged in the workbench leg.
Workbench Care
1. Wash theworkbench witha milddstergentand warm water.Do net
allowwatertoremainon theworkbench forany lengthoftime.
2, Rinsecompletelyand drythoroughly.
GLADIATORTMGARAGEWORKSMODULARWORKBENCH
WARRANTY
ONE-YEAR LIMITED WARRANTY ON WORKBENCH TOP
For one year from the date of purchase, when this product isop_erated and maintained according to the instructionsattached to or furnished with the
product, GladiatorTM GarageWorks will replace or repair the defective product or parts to correct defects in materials orworkmanship.
LIFETIME LIMITED WARRANTY ON WORKBENCH METAL SECTIONS
For the life ofthe product when the Modular Workbench is used and maintained according to the instructions attached to or furnished with the product
G adistorTM GarageWorks will pay for repair or replacement of the defective product or parts to correct defects n mater a s or workmanship.
Gladiator TM GarageWorks will not pay for:
1. Service calls to correct the installation of any GladiatorTM GarageWorks products or to instruct you on how to use or install them.
2. Damage resulting from improper handling or shipping of products, or products damaged by accident, misuse, abuse, fire, flood, improper
installation,acts of God, neglect, corrosion, modification or mishandling.
3. Shipping or freight fees to deliv_" replacement products or to return defective products.
4. Repairsor replacement when your product isused in otherthan normal, single-family household use, such as a commercial environment or handled
inany way inconsistent with the installationinstructions included withthe product.
5. Cosmetic damage includingscratches, dings, dents or cracks that do not affect the structural or functional capability of the product.
6. Replacement parts or product for GladietorTM GarageWorks products operated outside the United States and Canada.
7. In Canada, travelor transportation expenses for customers who reside in remote areas.
8. Any labor costs duringthe limitedwarranty period.
9. Damage resulting from improper loading beyond the specified maximum weight capacity outlined inthe assembly instructionsprovided with the
product.
10. Surfaces damaged due to chemical interaction resulting In corrosion of paint or metal.
11. Any damage, splitting, checking, cracking orwarping of the wooden top past the first year.
GLADIATOR TM GARAGEWORKS SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
Some states or provinces do not allow the exclusion or limitation ofincidental or consequential damages, so thisexctualon or limitation may not apply to
you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Outside the 50 United States and Canada, this warranty does not apply, Contact your authorized Gladiator TM GarageWorks dealer to determine
if another warranty applies.
If youneed service, call the GladiatorTM GarageWorks Customer Care Center, 1-866-342-4089 (toll-free) from anywhere in the U.S.A. in Canada, contact
your Whirlpool Canada Inc. designated service company or ca 1-800-807-6777.
2/03
Keep this book and your sales slip together for future reference. You
must provide proof of purchase or installation date for In-warranty
service.
Write down the following information about your Modular Workbench to
better help you obtain assistance or se_ice ifyou ever need it. You will
need to know your complete model number and serial number. Youcan
findthis information on the model and serial label located on the back of
the product.
Dealer name
Address
Phone number
Model number.
Serial number
Purchase date
3
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
