Danfoss 077Z7015 Installation guide

Type
Installation guide

This manual is also suitable for

077R0702
077R0702
© Danfoss | DCS (lll) | 2016.12
DKAP.PI.200.A1.22 | 1
Installation guide
Service thermostats
Type 077B7
Service thermostats 077B7060 - Commercial Refrigerators
Service thermostats 077B7062 - Commercial Refrigerators
Service thermostats 077B7064 - Commercial Refrigerators
Service thermostats 077B7061 - Commercial Refrigerators
Service thermostats 077B7063 - Commercial Refrigerators
Service thermostats 077B7065 - Commercial Refrigerators
Length of capillary (mm): L = 1067 +30/-0
Min. sensor length mounted on evaporator (mm): LS = 105
(Used as airsensor min. 2 x LS)
Length of capillary (mm): L = 1842 +30/-0
Min. sensor length mounted on evaporator (mm): LS = 135
(Used as airsensor min. 2 x LS)
Length of capillary (mm): L = 1067 +30/-0
Min. sensor length mounted on evaporator (mm): LS = 105
(Used as airsensor min. 2 x LS)
Rated 8 – 40 A
Rated 8 – 40 A EBD
Rated 8 – 40 A
Length of capillary (mm): L = 1067 +30/-0
Min. sensor length mounted on evaporator (mm): LS = 105
(Used as airsensor min. 2 x LS)
Length of capillary (mm): L = 1067 +30/-0
Min. sensor length mounted on evaporator (mm): LS = 105
(Used as airsensor min. 2 x LS)
Length of capillary (mm): L = 1080 +30/-0
Min. sensor length mounted on evaporator (mm): LS = 105
(Used as airsensor min. 2 x LS)
Cut-in
Cut-in
Cut-in
-8.1
-12.8
-9.3
3
3
3
4
4
4
+5.5
+2.8
+5.4
-1.3
-5.6
-4.6
-4.6
-8.6
-6.4
Off
Off
Off Warm
Warm
Warm
Middle
Setting pos.
Middle
Setting pos.
Middle
Setting pos.
Cold
Cold
Cold
Cut-out
Cut-out
Cut-out
°C
Cut-in
-10.6
+2.9
-5.9
-7.7
Off Warm Middle
Setting pos.
Cold
Cut-out
°C
°C
Cut-in
-9.9
+6.2
-4.4
-6.6
Off Warm Middle
Setting pos.
Cold
Cut-out
°C
°C
Cut-in
-10.6
+2.9
-5.9
-7.7
Off Warm Middle
Setting pos.
Cold
Cut-out
°C
Rated 8 – 40 A
3 4
Rated 8 – 40 A
3 4
Rated 8 – 40 A
3 4
DKAP.PI.200.A1.22
© Danfoss | DCS (lll) | 2016
Danf
oss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order pro
vided that such alterations can be made without subsequential changes being necessary eady agreed.
All trademarks in this material are property of the respec
tive companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
The 077B….EBD, 077B….L EBD can be applied on systems with R290 and R600a as the working fluid.
For countries where safety standards are not an indispensable part of the safety system Danfoss recommend the installer to get a third
party approval of the system containing flammable refrigerant.
Note: All temperatures at 760 mm Hg
Service thermostats 077B7066 - Ice-cream cabinets and
freezers without signal
Service thermostats 077B7068 - Ice-cream cabinets and freezers without signal
Service thermostats 077B7067 - Commercial Refrigerators
Length of capillary (mm): L = 622 +30/-0
(Airsensor)
Length of capillary (mm): L = 623 +30/-0
(Airsensor)
Rated 8 – 40 A
Rated 8 – 40 A
3 4
3 4
Length of capillary (mm): L = 1087 +30/-0
Min. sensor length mounted on evaporator (mm): LS = 110
(Used as airsensor min. 2 x LS)
4
Rated 8 – 40 A
3
Cut-in
-22.8
-28.8
-15.7
-20.7
-24.6
-19.2
Off Cold
Cut-out
°C
Warm Middle
Setting pos.
Cut-in
-21.8
-29.5
-16.7
-23.5
-26.4
-19.2
Off Cold
Cut-out
°C
Warm Middle
Setting pos.
Cut-in
-6.0
+4.2
-1.5
-3.2
Off Cold
Cut-out
°C
Warm Middle
Setting pos.
Accessories for
077B7060
077B7061
077B7062
077B7063
077B7064
077B7065
077B7067
Accessories for
077B7066
077B7068
  • Page 1 1
  • Page 2 2

Danfoss 077Z7015 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI