The 077Z….EBD, 077Z….L EBD can be applied on systems with R290 and R600a as the working fluid.
Always adhere to local codes and safety guidelines. For countries with no conformity certification (UL, CE, CCC, CSA, EAC, etc.)
requirements on new systems, Danfoss recommends third party apporval for systems containing flammable refrigerants.
Note: All temperatures at 760 mm Hg
Service thermostats 077Z7014
Service thermostats 077Z7016
Service thermostats 077Z7015
Service thermostats 077Z7017
Length of capillary (in): L = 84
Min. sensor length mounted on evaporator (in): LS = 5
(Used as airsensor min. 2 x LS)
Length of capillary (in): L = 42
Min. sensor length mounted on evaporator (in):
LS = 4
(Used as airsensor min. 2 x LS)
Length of capillary (in): L = 66
Min. sensor length mounted on evaporator (in):
LS = 4
(Used as airsensor min. 2 x LS)
Cut-in
+25.5
+10
+47
+36.5
+25
+37.5
Off Cold
Cut-out
°F
Warm Middle
Setting pos.
Length of capillary (in): L = 84
Min. sensor length mounted on evaporator (in):
LS = 5
(Used as airsensor min. 2 x LS)
Cut-in
-18.5
-29
+9.5
+3
-11
-3
Off Cold
Cut-out
°F
Warm Middle
Setting pos.
16 – 96 A
EBD
3 4
16 – 96 A
EBD
36
4
16 – 96 A
EBD
3 4
16 – 96 A
EBD
3 4
Cut-in
-11
-25.5
+16.5
+7
-7.5
+4
Off
Cold
Cut-out
°F
Warm Middle
Setting pos.
Cut-in
-18.5
-29
+9.5
+3
-11
-3
Off Cold
Cut-out
°F
Warm Middle
Setting pos.
© Danfoss | Climate Solutions | 2022.10 AN216286431722en-000103 | 2
