Spatz COMPDEC User manual

COMPDEC
Spatz
Brand
Spatz
Model
COMPDEC
Category
Video converters
Type
User manual

Spatz COMPDEC: a low-cost video decoder that converts composite or S-Video signals to YPrPb or RGsB without altering resolution, aspect ratio, or refresh rate. It's compatible with worldwide video standards like PAL/NTSC/SECAM. The device features a simple interface with an input selector button, a status LED, and a slider to switch between YPrPb and RGsB output. It supports 480i or 576i output signals and comes with a 5VDC 350mA power supply.

Spatz COMPDEC: a low-cost video decoder that converts composite or S-Video signals to YPrPb or RGsB without altering resolution, aspect ratio, or refresh rate. It's compatible with worldwide video standards like PAL/NTSC/SECAM. The device features a simple interface with an input selector button, a status LED, and a slider to switch between YPrPb and RGsB output. It supports 480i or 576i output signals and comes with a 5VDC 350mA power supply.

SPATZ Tel. +49-7335-921400
Mühlhauser Str.5 Fax. +49-7335-921402
73344 Gruibingen e-mail:spatz@spatz-tech.de
Germany
www.spatz-tech.de
COMPDEC
Manual Composite/S-VHS to YPrPb Decoder
Funktionsbeschreibung
Der COMPDEC ist ein kompakter low cost Video Decoder für
Composite oder S-Video nach YPrPb oder RGsB.
Die Timings des Signals werden nicht geändert, es handelt sich
um einen Analog Digital Wandler ohne Scaler. Bildauflösung,
Format und Bildwiederholrate bleiben erhalten.
Mit dem Einganswahlschalter bestimmen Sie die Art der
Eingangssignals.
Ist der Composite Eingang ausgewählt leuchtet die LED grün
bei aktivem S-Video Eingang rot.
Flackert die LED dann wurde kein Eingangssignal erkannt, und
das Kabel ist eventuell defekt.
Das Gerät unterstützt alle Video Systeme wie PAL/NTSC oder
SECAM.
Mit dem kleinen Schiebeschalter an der Seite können Sie
zwischen RGsB oder YPrPb auswählen.
Die RGsB Betriebsart wird meist nur von professionellen
Displays unterstützt und darf nicht mit RGBs verwechselt
werden.
Aussgangssignal: 480i oder 576i
Grösse: 145 x 90 x 32 mm
Gewicht: 160 g
Stromversorgung (im Lieferumfang) 5VDC 350 mA
Functional description
The COMPDEC is a small low cost video decoder for composite
or S-Video signals. The device performs an analog to digital
conversion preserving input resolution, aspect ratio and vertical
refresh rate. The Video timings remain untouched.
The unit is compatible with all world wide video standards, like
PAL/NTSC or SECAM.
The top button selects between composite or S-Video Input,
green led for composite and red for S-Video.
A flashing LED indicates no signal recognized, so your cable
might be broken, or no signal is available.
The output may be switched between YPrPb or RGsB using the
small slider on the side of the unit.
RGsB however may only be used with professional displays as
this is no consumer standard.
Be sure to check the manual of your display if you want to use
RGsB.
Output signal: 480i oder 576i
Dimension: 145 x 90 x 32 mm
Weight: 160 g
Power Supply (included) 5VDC 350 mA
  • Page 1 1

Spatz COMPDEC User manual

COMPDEC
Spatz
Brand
Spatz
Model
COMPDEC
Category
Video converters
Type
User manual

Spatz COMPDEC: a low-cost video decoder that converts composite or S-Video signals to YPrPb or RGsB without altering resolution, aspect ratio, or refresh rate. It's compatible with worldwide video standards like PAL/NTSC/SECAM. The device features a simple interface with an input selector button, a status LED, and a slider to switch between YPrPb and RGsB output. It supports 480i or 576i output signals and comes with a 5VDC 350mA power supply.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents