ICP DAS USA TP-4100 User manual

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 1

TPM-4100/TP-4100

Touch Panel Monitor

User Manual

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 2

 Warranty

All products manufactured by ICP DAS are under warranty regarding defective

materials for a period of one year, beginning from the date of delivery to the original

purchaser.

 Warning

ICP DAS assumes no liability for any damage resulting from the use of this product.

ICP DAS reserves the right to change this manual at any time without notice. The

information furnished by ICP DAS is believed to be accurate and reliable. However,

no responsibility is assumed by ICP DAS for its use, nor for any infringements of

patents or other rights of third parties resulting from its use.

 Copyright

 Trademarks

Names are used for identification purposes only and may be registered trademarks of

their respective companies.

Contact us

If you encounter any problems, please feel free to contact us.

You can rely on ICPDAS for a prompt quick response.

Email: service@icpdas.com

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 3

Table of Contents

Table of Contents ............................................. 3

1. Introduction .................................................. 5

1.1. Features ..................................................................... 7

1.2. Specifications ............................................................. 8

1.3. Dimension .................................................................. 9

1.4. I/O interfaces ............................................................ 13

1.5. Companion CD ........................................................ 14

1.6. System Setup ........................................................... 15

1.6.1. System Configuration ................................. 15

1.6.2. Panel Mounting ........................................... 18

2. Touch Driver Setup .................................... 20

2.1. Windows CE 5.0 ...................................................... 21

2.1.1. USB Touch Driver ....................................... 22

2.1.1.1. Installation for WinPAC-8000 and WinPAC-5000 23

2.1.1.2. Configuration for WinPAC-8000 and WinPAC-5000 24

2.1.1.3. Uninstalling the WinPAC-8000 and WinPAC-5000 26

2.1.1.4. Other Windows CE5.0 Devices ... 27

2.1.2. Serial Touch Driver ..................................... 28

2.1.2.1. Installation for WinPAC-8000 and WinPAC-5000 29

2.1.2.2. Configuration for WinPAC-8000 and WinPAC-5000 31

2.1.2.3. Uninstalling the WinPAC-8000 and WinPAC-5000 33

2.1.2.4. Other Windows CE5.0 Devices ... 34

2.2. Windows CE 6.0 ...................................................... 35

2.2.1. USB Touch Driver ....................................... 36

2.2.1.1. Installation for XP-8000-CE6 ....... 37

2.2.1.2. Configuration for XP-8000-CE6 ... 39

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 4

2.2.1.3. Uninstalling the XP-8000-CE6 ..... 41

2.2.1.4. Other Windows CE6.0 Devices ... 43

2.2.2. Serial Touch Driver ..................................... 44

2.2.2.1. Installation for XP-8000-CE6 ....... 45

2.2.2.2. Configuration for XP-8000-CE6 ... 48

2.2.2.3. Uninstalling the XP-8000-CE6 ..... 50

2.2.2.4. Other Windows CE 6.0 Device .... 52

2.3. Windows XP Embedded .......................................... 53

2.3.1. Universal Driver .......................................... 53

2.3.1.1. Installation for XP-8000 ............... 54

2.3.1.2. Configuration for XP-8000 ........... 59

2.3.1.3. Uninstall for XP-8000 .................. 63

2.3.1.4. Other Windows XP Embedded Devices 65

2.4. Windows XP/7 .......................................................... 66

2.4.1. Universal Driver .......................................... 66

2.4.1.1. Installation ................................... 67

2.4.1.2. Configuring .................................. 71

2.4.1.3. Uninstall ...................................... 73

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 5

1. Introduction

This chapter provides an overview

of the TPM-4100/TP-4100 and its

components.

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 6

The TPM-4100/TP-4100 Panel Mount Monitor includes a standard 10.4" TFT

LCD screen with a rugged aluminum front bezel that support 800 x 600

resolution and a -25 ~ 75°C operating temperature range. The

TPM-4100/TP-4100 is also guaranteed to integrate with ICP DAS PAC

control systems, such as WP-8000 series and the XP-8000 series.

Package List

The shipping package includes the following items:

 1 10.4” TFT LCD Monitor

 1 VGA cable

 1 RS-232 cable

 1 USB cable

 4 Mounting clamps

 4 Mounting Screws

 1 Power supply

 1 Companion CD containing software drivers and digital versions of the

user manuals

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 7

1.1. Features

 10.4" LCD Monitor supports a 800 x 600 resolution

 Full-function OSD control keys for optimizing the display

 Driver Support for Windows 2K/XP/Vista/7/XP-Embedded/WinCE 5.0/6.0

 Wide operating temperature range of -25 ~ +75° C

 Aluminum front bezel design that is ideal for rugged applications

 LED backlight technology

 Supports the IP65 standard for protection against dust and water

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 8

1.2. Specifications

The table below is a summary of the specifications of the TPM-4100/TP-4100, and

lists the accessories that are supported by the TPM-4100/TP-4100.

Specifications

Model

TPM-4100

TP-4100

Display

Size 10.4”

Resolution 800 x 600

Max. colors 16.7 M

Brightness (cd/m2) 320

Contrast ratio 500:1

Viewing angle (H/V) 140/130

Backlight life (hrs) 50,000

Touch panel

4-wire 5-wire

Analog resistive, RS-232 or USB1.1 (Type B) interface

Input signal VGA (analog RGB)

MMI (Man Machine Interface)

OSD control Functions: Brightness, Contrast, Phase, Horizontal Position, Vertical Position

Power switch

Yes

LED indicators Power, Display signal is detected

Power

Input range +12 ~ 48 VDC

Power consumption

8.5 W

Mechanical

Material

Aluminum

Plastic

Dimensions (W x L x H) 293 mm x 231 mm x 53 mm 290 mm x 228 mm x 53 mm

Installation Panel Mounting

Panel Mounting, VESA (75 x 75)

Mounting

Ingress protection Front panel: IP65

Environmental

Operating temperature

-25 ~ +75℃

Storage temperature

-30 ~ +80℃

Ambient relative humidity 10 ~ 90% RH (non-condensing)

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 9

1.3. Dimension

TPM-4100 (Unit: mm)

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 10

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 11

TP-4100 (Unit: mm)

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 12

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 13

1.4. I/O interfaces

TPM-4100

TP-4100

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 14

1.5. Companion CD

This package includes a companion CD that contains a collection of documentation

and device drivers. An outline of the folder structure is illustrated below.

Driver

Win_XP_7

Touch Driver for Windows 2K/XP/2003/2008/Vista/7

Touch Driver for the XP-8000 series

Touch Driver for the WP-8000 and WP-5000 series

Documents

Touch_Panel_User_Manual_v100.pdf

Other XP Embedded device

V5.0

Other CE5.0 device

WP-8000 and WP-5000 device

Touch Driver

Other CE6.0 device

XP-8000-CE6 device

Touch Driver for the XP-8000-CE6 series

Touch Driver

CD:\TPM-4100_TP-4100

Win_XP_Embedded

XP-8000 device

WinCE

V6.0

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 15

1.6. System Setup

This section gives details regarding system configuration and adjustment and

mounting options.

1.6.1. System Configuration

Front Panel Controls

Control Function

1

Adjust V-Position, H-Position,

Clock and Clock and Clock-Phase

2

Turns OSD main menu on or off

3

Selects adjustment item

4

Selects adjustment item counter-clockwise

1

2

3

4

5

6

TPM-4100

TP-4100

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 16

5

Decreases the value of the adjustment item

6

1. Increases the value of the adjustment item

2. Enter the adjustment item

OSD Menu Functions

Control

Description

Contrast

Adjusts the contrast of the monitor

Brightness

Adjusts the brightness of the monitor

Image setting Auto config Press to adjust automatically

Phase Increase or decrease phase value.

Clock

Increase or decrease pixel clock value

H-position

Move the screen left or right

V-position

Moves the screen up or down

Color setting

NATIVE

Color temperature

9300K

Color temperature

6500K

Color temperature

USER Making adjustments to the R/G/B content.

OSD setting

Language

Support 8 languages.

OSD.H

Move the OSD position horizontally on the

screen. When the ▲ button is pressed, the

OSD control menu will move to the right side

of the screen. Likewise, when the ▼ button

is pressed, the OSD control menu will move

to the left side.

OSD.V

Move the OSD position vertically on the

screen. When the ▲ button is pressed, the

OSD control menu will move to the top side

of the screen. Likewise, when the ▼ button

is pressed, the OSD control menu will move

to the lower side.

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 17

Data and Power LED

The Data LED and Power LED are situated in the top right-hand corner.

Data LED: When the LED is green, it indicates that there is no display signal.

Power LED: When the LED is red, it indicates that the power is on. When the LED is

not illuminated, it indicates that either the power is off, or the power supply is not

connected.

Display Modes__

The following display modes are supported.

Resolution

Horiz. Sync.

Vert. Sync.

640 x 480

31.4 KHz

50 Hz

31.4 KHz

59.9 Hz

37.5 KHz

75 Hz

720 x 400

31.4 KHz

70 Hz

800 x 600

35.1 KHz

56.2 Hz

37.8 KHz

60.3 Hz

46.9 KHz

75 Hz

1024 x 768

48.3 KHz

60 Hz

56.4 KHz

70 Hz

60.0 KHz

75 Hz

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 18

1.6.2. Panel Mounting

Insert the mounting brackets.

Screw the mounting bracket

to the unit.

Eight locations are available for attaching

four mounting clamps to secure the unit.

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 19

Refer to Sec.1.3 for default

information regarding the

dimensions of the panel.

Panel thickness up to 6 mm.

TPM-4100/TP-4100 Touch Panel Monitor User Manual, version 1.0.2, Last Revised: Aug 2012 Page: 20

2. Touch Driver Setup

This chapter provides a overview

that describes the steps required

for installing, uninstalling, and

configuring the touch driver.

Page is loading ...

ICP DAS USA TP-4100 User manual

ICP DAS USA TP-4100 User manual

Related papers

Other documents