http://www.barco.com/en/products-solutions/projectors
For more information and Maintenance Guidelines,
check the Detailed User Manual on:
- To save lamp lifetime, first switch the projector to standby mode
and wait two minutes, then switch off the main power.
- Ensure that the projector is operating with clean filters.
- Do not block the ventilation in -and outlets.
- Using the projector at a non recommended tilt angle will reduce the lifetime of the lamps
or create unexpected behaviour of the unit.
- Laser light can cause severe damage to the DMD. This damage is not covered by warranty.
10
Important Info
R5905603-00 MAN QSG PH-series
see user manualADVANCED
service informationSERVICE
normal/eco/powerMODE
information on lamp statusINFO
select language
LANGUAGE
adjust keystoneKEYSTONE
adjust lens shiftLENS SHIFT
adjust lens zoomLENS ZOOM
adjust lens focusLENS FOCUS
modify image aspect ratioASPECT RATIO
adjust image colourCOLOR
adjust image contrastCONTRAST
adjust lamp brightness levelBRIGHTNESS
Toggle between input sourcesINPUT
MODE
M
INFO
i
SERVICE
i
ADVANCED
KEYSTONE
BRIGHTNESS CONTRAST COLOR
LENS ZOOM
LANGUAGE
INPUT
LENS FOCUSASPECT RATIO
LENS SHIFT
9
OSD Lite Menu
8
Starting Projector
OFF/STBY
ON
Error
During Start-up
1 sec 1 sec 1 sec 1 sec 1 sec
Status Led
IR Position
Front
IR Position
Rear
7
Remote Control
Quick Keys
Quick Key 1
Quick Key 2
Push Menu-UP twice
for instant ‘Picture Mute’
(for Remote and keypad)
Push Menu-OK for
quick access to the
Focus/Zoom Menu
Feedback LED
Menu - UP
Menu - RIGHT
Menu - OK
Menu - LEFT
Menu - DOWN
Home/Menu
Battery Lid
(Slide down
to open)
Power
On/Off
6
Input Cables
(See User Manual for detailed info on Inputs and PiP)
192
120
171
342
240
(283)
M4x10mm MAX. (4x)
Unit Weight: 21 kg
Please check the manual of your
supportsystem for compatibility
*(Ceiling mount system is not included)
5
Ceiling Mount*
4
Rear Cover
Loosen the 4 screws at the back and remove the rear cover
to gain access to the inputs panel.
Please consult the
full User Manual
for detailed info on
Lens Assembly or
Lens Replacement.
This should only be
done by a qualified
Service Technician,
preferrably prior to
ceiling mounting.
3
Lens Assembly
Direction to release
the side covers from the unit.
Loosen the four captive screws on each
of the two side panels.
2
Side Cover Removal
(EU/US/CH)
user
manual
AAA (2x)
1
Packaging Contents
Quick Setup Guide
Congratulations on purchasing
this product
PHXG-91B
PHWX-81B
PHWU-81B
