83622B

Agilent Technologies 83622B User manual

  • Hello! I am an AI chatbot trained to assist you with the Agilent Technologies 83622B User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Service Guide
Agilent Technologies
8360 B-Series Swept Signal Generator
8360 L-Series Swept CW Generator
Serial Number Prefixes:
This manual applies to any instrument with the following model number and serial number prefix combinations. You may have to
modify this manual so that it applies directly to your instrument version. Refer to the “Instrument History” chapter.
Agilent Technologies 83620B/22B/23B/24B/30B
3844A and Below
Agilent Technologies 83640B/50B
4040A and Below
Agilent Technologies 83623L/30L
3844A and Below
Agilent Technologies 83640L/50L
4040A and Below
Part Number: 08360-90125
Printed in USA
October 2000
© Copyright 1997-2000 Agilent Technologies, Inc.
ii
Notice
The material contained in this document is provided “as is”, and is subject to being changed, without notice, in future editions.
Further, to the maximum extent permitted by applicable law, Agilent disclaims all warranties, either express or implied with
regard to this manual and to any of the Agilent products to which it pertains, including but not limited to the implied warranties
of merchantability and fitness for a particular purpose. Agilent shall not be liable for errors or for incidental or consequential
damages in connection with the furnishing, use, or performance of this document or any of the Agilent products to which it
pertains. Should Agilent have a written contract with the User and should any of the contract terms conflict with these terms,
the contract terms shall control.
Questions or Comments about our Documentation?
We welcome any questions or comments you may have about our documentation. Please send us an E-mail at
Printed in USA July 2004
Notice
Hewlett-Packard to Agilent Technologies Transition
This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-
Packard's former test and measurement, semiconductor products and chemical analysis
businesses are now part of Agilent Technologies. To reduce potential confusion, the only
change to product numbers and names has been in the company name prefix: where a
product name/number was HP XXXX the current name/number is now Agilent XXXX. For
example, model number HP 8648 is now model number Agilent 8648.
Contacting Agilent Sales and Service Offices
The sales and service contact information in this manual may be out of date. The latest
service and contact information for your location can be found on the Web at:
http://www.agilent.com/find/assist
If you do not have access to the Internet, contact your field engineer. In any correspondence
or telephone conversation, refer to your instrument by its model number and full serial
number.
/