Gamber-Johnson DS-STEP Datasheet

Placement Drilling Required Pole Weight Height Width Depth

Any MCS Top Plate or Vehicle

Base without a welded pole or

directly to the  oor

No - When mounting onto a Vehicle Base

or MCS Top Plate

Ye s - when mounting directly to the vehicle  oor

Order Lower

and Upper Tube

separately

3.0 lbs 4.0” 3.5” 3.5”

Features:

• Heavy gauge steel construction for long-term durability

• Black powdercoat  nish for maximum corrosion resistance

• Will not interfere with levers or factory-installed console

• The O set Universal Mounting Step is already included in the following Vehicle Bases (Item No. DS-112, DS-118,

DS-120, DS-124, DS-132, DS-142, DS-144, DS-150, 7160-0036, 7160-0046, 7160-0055, 7160-0222, 7160-0234,

7160-0256, 7160-0260, 7160-0262, 7160-0281, 7160-0323, 7160-0342 or 7160-0350) however, additional O set

Universal Mounting Steps can be ordered to stack on top of each other if needed

• Is not compatible with the following Vehicle Bases (Item No. DS-52, DS-53, DS-56, DS-57, DS-100, DS-138,

7160-0090, 7160-0116, 7160-0133, 7160-0198, 7160-0248 or 7160-0451)

Item No. DS-STEP

3001 Borham Ave. | Stevens Point, WI 54481, USA

Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209

Email: [email protected] | Website: www.gamberjohnson.com

This document, including images, may not be reproduced partly or fully without the expressed written

EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING

OFFSET UNIVERSAL MOUNTING STEP

Download PDF