Issue date 2010-10-15
Version: 1.0.5
12 NC: 8670 000 66328
EAN: 69 23410 70472 3
© 2010 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
Specifications
SHH9757/10
Headset for iPhone with remote and mic
Highlights
In-line remote with mic
Want to skip a track? Change the volume? Accept or
reject a call? Record a voice memo? The remote
features a sensitive mic as well as volume controls,
call and skip functions. It can also trigger voice
control. With this headset, control is at your
fingertips - no need to keep your iPhone or iPod
accessible or to unlock the screen.
Blissfully comfortable
Designed for blissful comfort, these headphones are
wrapped in a gel sleeve. The soft sleeve gently
moulds to the shape of your outer ear to make these
your new favourite headphones.
For optimal fit in all ears
With a choice of 3 interchangeable ear caps from
size small to large, surely there is a pair that fits your
ear perfectly.
For booming sound and power
The speaker driver is made of a composite Mylar
material for a highly sensitive yet powerful element
that enables superior power output and delivers
high-fidelity sound without any audible distortion.
For most directional sound
Angled Acoustic Pipe is designed according to the
curvature of the human ear canal so that sound
waves from the speaker are directed precisely to
your ear drum with the highest definition
For best sound at low volume
You don't have to turn up the volume in noisy places
any more. Angled Acoustic Pipe and the perfectly
sealing ear buds cut off background noise
significantly, delivering the same quality sound at a
lower volume and with a longer battery life.
Carry case
This case is the most convenient way to look after
your headphones and prevent the cable tangling
when not in use.
Flexi-grip design
The soft flexi-grip material that the body of the
headphone is sheathed in enhances its performance
and extends its durability. It protects the cable
connection from damage that otherwise could occur
due to repeated bending of the headphone body
from frequent contact with the user's fingertips
when being put on and removed.
Sound
• Frequency response: 5 - 23,500 Hz
• Speaker diameter: 8.6 mm
• Acoustic system: Open
• Magnet type: Neodymium
• Voice coil: CCAW
• Diaphragm: Mylar dome
•Impedance: 16 Ohm
• Maximum power input: 50 mW
• Sensitivity: 103 dB
•Type: Dynamic
Connectivity
• Cable length: 1.2 m
• Connector: 3.5 mm stereo
• Finishing of connector: 24k Gold-plated
•Type of cable: OFC
• Compatible with:: iPad, iPhone 3GS, iPod nano (4th
and 5
th generation), iPod shuffle (3rd generation),
iPod touch (2nd generation), iPod classic 120GB/
160 GB (Your device may require the latest
software for support)
• Cable Connection: Two-parallel, symmetric
• Microphone: Built-in microphone
Convenience
•Volume control
Inner Carton
• EAN: 87 12581 55706 5
• Number of consumer packages: 3
• Gross weight: 0.342 kg
• Inner carton (L x W x H): 17.5 x 13 x 11 cm
• Net weight: 0.0372 kg
• Tare weight: 0.3048 kg
Outer Carton
• EAN: 87 12581 55705 8
• Number of consumer packages: 24
• Gross weight: 3.436 kg
•Outer carton (L x W x H): 36.5 x 27.5 x 24.7 cm
• Net weight: 0.2976 kg
• Tare weight: 3.1384 kg
Packaging dimensions
• EAN: 69 23410 70472 3
• Number of products included: 1
• Packaging type: Blister
• Packaging dimensions (W x H x D):
9.5 x 17.5 x 4 cm
• Gross weight: 0.093 kg
• Net weight: 0.0124 kg
• Tare weight: 0.0806 kg
•
