Philips SHE9755/10 Datasheet

Category
Headphones
Type
Datasheet
Philips
In-Ear Headphones
SHE9755
Total comfort
Comfort plus: made for iPod control
Designed specifically with comfort in mind, these headphones have a gel body that
moulds gently to the shape of your ear shell. The angled design delivers precision directed
sound with a perfect seal so you experience pure sound immersion.
Always ready to go
Control your iPod at the tips of your fingers
3 interchangeable rubber ear caps for optimal fit in all ears
Carry case protects your headphones when not in use
Use them for longer
Gel body headphones for best in comfort
Ergonomic in-ear design for the best comfort and snug fit
Super soft rubber caps for sensational comfort
Enjoy quality sound
Angled Acoustic Pipe channels directional and precise sound
Exceptional noise isolation for quality sound at low volume
High-performance speakers deliver booming sound and power
Issue date 2009-10-13
Version: 4.0.5
12 NC: 8670 000 55633
EAN: 87 12581 50045 0
© 2009 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
Specifications
SHE9755/10
In-Ear Headphones
Highlights
For optimal fit in all ears
With a choice of 3 interchangeable ear caps from
size small to large, surely there is a pair that fits your
ear perfectly.
For a snug and natural fit
Angled Acoustic Pipe is ergonomically designed
according to the anatomy of the human ear canal. It
fits in the ear so snugly and comfortably that you can
put it on and simply forget about it.
Super soft rubber caps
The ultra-soft rubber material on the rubber caps is
sensational to the touch and adapts effortlessly to
your ear. In-ear headphones have never been this
comfortable.
For best sound at low volume
You don't have to turn up the volume in noisy places
any more. Angled Acoustic Pipe and the perfectly
sealing ear buds cut off background noise
significantly, delivering the same quality sound at a
lower volume and with a longer battery life.
For booming sound and power
The speaker driver is made of a composite Mylar
material for a highly sensitive yet powerful element
that enables superior power output and delivers
high-fidelity sound without any audible distortion.
Sound
Magnet type: Neodymium
Voice coil: CCAW
Diaphragm: Mylar dome
Frequency response: 5 - 23,500 Hz
•Impedance: 16 Ohm
Maximum power input: 50 mW
Sensitivity: 103 dB
Speaker diameter: 8.6 mm
•Type: Dynamic
Connectivity
Cable Connection: Two-parallel, symmetric
Cable length: 1.2 m
Connector: 3.5 mm stereo
Finishing of connector: 24k Gold-plated
•Type of cable: OFC
Inner Carton
Gross weight: 0.6 kg
•Inner carton (L x W x H): 26 x 10.5 x 15.8 cm
Net weight: 0.066 kg
Tare weight: 0.534 kg
EAN: 87 12581 50046 7
Number of consumer packages: 6
Outer Box
Gross weight: 11.5 kg
•Outer carton (L x W x H): 53.5 x 43.5 x 33.8 cm
Net weight: 1.056 kg
Tare weight: 10.444 kg
EAN: 87 12581 50047 4
Number of consumer packages: 96
Packaging dimensions
Packaging dimensions (W x H x D):
9.5 x 17 x 4 cm
Gross weight: 0.09 kg
Net weight: 0.011 kg
Tare weight: 0.079 kg
EAN: 87 12581 50045 0
Number of products included: 1
Packaging type: Blister
Convenience
•Volume control
  • Page 1 1
  • Page 2 2

Philips SHE9755/10 Datasheet

Category
Headphones
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI