Page is loading ...
12Vdc SPDT Relay (Non-Buffered)
General
RLB1-S is a 12Vdc “non-buffered” relay with a
single pole, double throw output (SPDT).
RLB1-S may be used to drive devices drawing up
to 6A @ 30Vdc.
Connecting a 12Vdc source to the input will
activate the relay and illuminated LED H1.
This relay is also available in a 24Vdc configuration
- Tactical Part No: RLB1-S-24VDC
Please visit www.tacpower.com.au for additional
models.
Table 1.
A
12V Relay (6A @ 30Vdc)
B
12Vdc Input ( - Negative )
C
12Vdc Input ( + Positive )
D
Relay Output - Nomally Closed
E
Relay Output - Common
F
Relay Output - Normally Open
G
Operation LED
RLB1-S
A B C
Input Voltage
12Vdc ( 11 - 15Vdc )
Configuration
SPDT
Contact Rating
6A @ 30Vdc
Dimensions
30W x 40L x 20H mm
D E F G
Tactical Power Products Australia’s
Security Power Specialist
High Quality Security Products
Designed, Manufactured and
Supported in Australia
www.tacpower.com.au
PO Box 90 Kurrajong NSW 2758 Australia
1300-822-769 Tel sales@tacpower.com.au
DESIGNED & MANUFACTURED
TIM-01 PDM5
Universal Digital Timer Power Distribution Board
www.tacpower.com.au or ask your Tactical distributor for details
TPS24-6DC TPS13-10DC
24Vdc 6A Power Supply with Battery Charger 13.5Vdc Power Supply with Battery Charger
© 2016 The contents of this
manual are copyright and may
not be reproduced without the
written permission of Tactical
Power Products Pty Ltd.
/
