EX-WOD4 / EX-WOD5 / EX-WOD6 /
EX-WOD8
ELUX SERIES
HIGH FIDELITY ALL WEATHER
OUTDOOR SPEAKERS
2
Congratulations on your purchase of an Elux Series product from
VM Audio. You have seen that with years of acquired taste for
quality, the Elux Series has the right design and performance to
satisfy your utmost demand. With music so clear and rich and
bass so low and loud, you will be immersed in a world of musical
euphoria that anything else will seem like white noise. By following
the installation instructions carefully, you will ensure yourself
performance that will be enjoyed from each use for years to come.
Reward yourself with the ner things in life.
Welcome!
Table of Contents
2
3
4
4
4
6
7
8
9
System Features
Important Safety Information
Applications
Package Contents
Installation
Connecting the Speakers to Your Receiver
Troubleshooting
Speci cations
Limited Warranty Agreement
System Features
• High Fidelity All Weather Outdoor Speakers
• Wide Spectrum Frequency Design
• All Weather Resistance, High Impact Cabinet
• Optimum High Output Full Range Audio Reproduction
• Deep, Rich Bass Performance
• CAD Tuned Bass Re ex Cabinet Design
• High Excursion Woofer
• Precision Titanium Midrange Driver
• Precision Titanium Dome High Frequency Driver
• Polymer-Coated Silver Ballistic Lightweight Fiber Glass Cone
• High Compliance Half-Roll Black Rubber Surround
• Ef cient Low-Loss CAD Magnetic Motor Structure
11
Installation Notes
10
Installation Notes
3
Important Safety Information
1. Please read these instructions carefully before you
attempt to install and operate this product.
2. Keep this User Guide for future reference.
3. Save all packaging in the event this product needs to
be returned for service or replacement.
4. Heed all warnings. This product can be hazardous if
not used properly or as directed.
5. Set up your system in a safe and secure manner.
6. Protect speaker wires from being walked on or
getting pinched.
7. Before placing, installing, or suspending this product,
inspect all hardware, brackets, and surfaces
for damage. If a fault is discovered, correct it
immediately.
8. Do not attempt to service this product. Refer all
servicing to quali ed service personnel.
9. This loudspeaker can easily reproduce sound
pressure levels (SPL) loud enough to cause
permanent ear damage that could result in hearing
loss. Take great precaution to protect yourself from
prolonged exposure to high output sound pressure
levels.
CAUTION
System Features (continued)
• High-Strength Kapton Former with KSV Voice Coil
• All-Weather Speaker Wire Connector
4
Mounting Tips
• It is recommended you install these speakers to a solid surface
such as wood studs. If installing to a material such as drywall,
ensure that the surface can support the weight of the speakers.
The use of wall anchors is highly recommended.
• Before securing the speakers to your desired mounting surface,
ensure the speakers will clear any obstacles such as lighting
xtures, door or window frames, ceilings, etc.
• While these are outdoor speakers, you will extend the life of
these speakers if they are installed in an area where they receive
minimal exposure to the elements.
• The mounting brackets provided allow you to mount the speakers
either horizontally or vertically and to aim the speakers in a
precise direction that facilitates optimum sound quality.
• If, at any time, you are unsure regarding the installation process,
contact either VM Audio or a professional installer for assistance.
Outdoor/Indoor, Backyard, Garage, Warehouses, Parking Lots,
Restaurants, Bars, and much more.
Your Elux Outdoor Speakers were carefully packaged to ensure
a safe and secure transport to its destination. Please review the
contents of the package and make sure you have received all the
items included with your speakers.
• (2) White All Weather Speakers
• (2) Mounting Brackets with Mounting Hardware
• (1) User Guide
• (1) Online Production Registration Card
Installation
Applications
Package Contents
9
Limited Warranty Agreement
Your product is covered by a limited warranty by VM Audio as established
below:
Electronics Limited Warranty
Products purchased from an Authorized VM Audio Dealer are warranted
to be free of defects in material and workmanship for one (1) year from the
date of original purchase under normal usage. Products that are identi ed
as “refurbished” have a limited warranty of ninety (90) days from the date of
original purchase. Dated proof of purchase (original receipt or invoice) will be
required for all warranty claims. In the unlikely event that you experienced a
manufacturing defect or malfunction during the warranty period, VM Audio
will repair the defective product or replace with the same or equivalent
product if the same item is not available or discontinued. Replacement
product may have super cial blemishes or scratches that do not affect
the performance of the product. This warranty is only intended and valid
for the original purchaser and cannot be extended to subsequent owners.
Any applicable implied warranties are limited to the period of the expressed
warranty starting from the original purchase date. No warranties, expressed
or implied, will be accepted after the previously listed periods. Exclusions may
apply. Please check your local state laws.
Instructions for Claiming Warranty Service
If you should require warranty service, please return the product to the
Authorized VM Audio Dealer where you originally purchased the item for an
experienced and speedy claim of your warranty service. Contact VM Audio
directly to nd the Authorized Dealers nearest you.
In case the defective merchandise needs to be returned to VM Audio, please
contact us and a Return Merchandise Authorization (RMA) number will be
assigned. It is important to pack all defective items in the original packaging
to prevent damages from shipping, and be sure to write the RMA number
clearly on the outside of the box for faster processing. Do not include non-
defective items as it is not necessary and will increase your shipping costs.
Limited Warranty Agreement
Include a copy of the original receipt or invoice with the purchase date,
dealer’s name, customer’s name, and invoice number clearly visible.
Manufacturing date may be used if no proof of purchase is provided. The
customer will pay to ship the defective product; COD will not be accepted.
Please follow the above instructions carefully to prevent voiding your
warranty.
Your Warranty Service Does Not Cover the Following:
• Products not purchased from an authorized VM Audio Dealer
• Damages from poor installation by not following the included instruction
manual
• Damages due to excessive moisture, heat, and other elements from
improper care
• Evidence of tampering or repair by non-authorized personnel
• Products not issued an RMA number
• Damage during freight from poor packaging or handling
• Return shipping on non-defective items
Warranty Turnaround Time
It is VM Audio’s goal to turnaround the merchandise in a timely fashion of
1 week. Unexpected delays may occur due to repair parts or replacement
shortage.
International Warranty
Please check with your Authorized International VM Audio Dealer or
distributor for speci c warranty policies and processes for your country.
8
EX-WOD4
EX-WOD5
EX-WOD6
EX-WOD8
• RMS: 70W Total
• Peak: 280W Total
• Sensitivity: 89dB
• Frequency: 70Hz - 20kHz
• Impedance: 8 Ohms
• Midrange Driver: 1-½”
• High Frequency Driver: ½”
• Woofer Size: 4”
• Dimensions: 8.85 in. (H) x 5.5
in. (W) x 5.7 in. (D)
• RMS: 80W Total
• Peak: 320W Total
• Sensitivity: 90dB
• Frequency: 55Hz - 20kHz
• Impedance: 8 Ohms
• Midrange Driver: 1-½”
• High Frequency Driver: ½”
• Woofer Size: 5.25”
• Dimensions: 9.10 in. (H) x 7 in.
(W) x 7.15 in. (D)
• RMS: 90W Total
• Peak: 360W Total
• Sensitivity: 92dB
• Frequency: 45Hz - 20kHz
• Impedance: 8 Ohms
• Midrange Driver: 1-½”
• High Frequency Driver: ½”
• Woofer Size: 6.5”
• Dimensions: 11.00 in. (H) x
7.8 in. (W) x 7.60 in. (D)
• RMS: 100W Total
• Peak: 400W Total
• Sensitivity: 94dB
• Frequency: 35Hz - 20kHz
• Impedance: 8 Ohms
• High Frequency Driver: 3”
• Woofer Size: 8”
• Dimensions: 15.50 in. (H) x 10
in. (W) x 8.60 in. (D)
Speci cations
5
Mounting the Speakers
1. With a pencil, mark the
intended mounting locations,
using the mounting brackets
as a template.
2. Pre-drill a hole directly into the
installation locations. If you
are not installing into a wall
stud, insert wall anchors (not
included) into the mounting
holes.
3. If necessary, pull speaker wire
out from the wall and thread
it through the hole in the
mounting brackets.
4. Position the brackets over the
installation holes and secure
to the wall using #10 screws
(not included).
6. Pull lightly on the speakers to ensure the screws and brackets
are properly aligned and secured to the mounting surface.
7. After you verify the brackets are secured to the wall, you can
loosen the mounting knobs to adjust the speakers to your desired
angles. Re-tighten the knobs when you reach the desired position.
5. Secure the speaker to the
bracket by positioning the
speaker between the bracket
arms. Align the holes in the
tops and bottoms of the
brackets with the holes in
the tops and bottoms of
the speakers. Secure the
speakers to the brackets
using the mounting knobs.
Tighten them securely.
Installation (continued)
No Stud
Wall
Stud
Drywall Drywall
6
Tab Connection (EX-WOD4/EX-WOD8)
Binding Post Connection (EX-WOD5/EX-WOD6)
1. Strip the red and black
receiver wires approximately
½” to expose the bare wire.
Ensure there are no frayed
wires by twisting any frayed
ends together.
2. Pull the red tab down on
the back of the speaker and
insert the red (positive) wire
into the hole. Release the tab
to secure the connection.
Repeat this step for the black
(negative wire) and black tab
on the speaker.
1. Strip the red and black
receiver wires approximately
½” to expose the bare wire.
Ensure there are no frayed
wires by twisting any frayed
ends together.
2. Unscrew the tops of
the binding posts on the
backs of the speakers in a
counterclockwise direction to
reveal the holes drilled through
the metal posts.
3. Connect the red (positive) wire
to the positive binding post.
This is the post on the right
when facing the back of the
speakers. Connect the black
(negative) wire to the black
(negative) binding post.
4. Tighten the binding posts
by screwing the tops in a
clockwise direction.
Connecting the Speakers to Your Receiver
7
No Sound
No Sound from One Speaker
• Check the speaker wires and ensure they have a solid connection
to all the speaker terminals on each speaker and on the ampli er
or receiver.
• Check that the receiver or ampli er is powered “on” at the mains,
is not on “mute”, has no headphones attached and that the
channels used for the speakers (usually A or B) is in operation.
• Refer to the owner’s guide that came with your receiver or
ampli er for troubleshooting guidelines for the unit.
• Most initial problems are connectivity, please try a different
connection cable to your in-ceiling speakers or equipment.
• Check the “balance” control on your receiver ampli er.
• Check all connections and cable to the inoperable speaker.
• Disconnect the “working” speaker from the receiver ampli er
connection/channel. Switch the cord from the non-operating
speaker from its current connection to the “working” speaker
connection. If the speaker now works, the problem is your
receiver ampli er.
• Reconnect as original. Remove the speaker cable at the “working”
speaker directly and connect it directly to the non-working
speaker. If the speaker now works, the problem is somewhere in
the original speaker cable.
• If the speaker still does not work the problem is the speaker.
Troubleshooting
-
1
-
2
-
3
-
4
-
5
-
6
VM Audio EX-WOD6 User manual
- Category
- Loudspeakers
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
