WORK SPACE GD1400-F User manual

Brand: WORK SPACE

Model: GD1400-F

Type: User manual

WORK SPACE GD1400-F is a height-adjustable gaming desk that allows you to customize your workspace for maximum comfort and productivity. With a weight capacity of up to 50 kgs, it can easily support your gaming equipment, including monitors, keyboards, and speakers. The desk features a sturdy metal frame and a durable tabletop that is resistant to scratches and stains. It also comes with a built-in cable management system to help you keep your cords organized and out of the way.

Height Adjustable Gaming Desk

AFTER SALES SUPPORT

0800 222 246NZ

The Maximum Weight this product can hold - up to 50 kgs

INSTRUCTION MANUAL

Important Safety Instructions

AFTER SALES SUPPORT

0800 222 246NZ

Do not place TVs or other heavy objects on top of this

product.

Never allow children to climb or hang from the top.

60 min

Approximate Assembly Time

2 Person Assembly

Floor Area

2 x 2meters

Required Assembly Space

Assembly Details

Please periodically check all ttings and re-tighten as necessary.

To clean your item, please use a damp cloth and wipe clean.

Never allow any kind of liquid to remain on your furniture. Absorption

can cause wood to warp or nishes to de-laminate.

Please do not place hot items (eg. hot drinks) directly on to the

Please do not drag and pull your furniture.

surface.

Care and maintenance

AFTER SALES SUPPORT

0800 222 246NZ

Tips before you start

1. Please check that all parts are present before you start the assembly of

your furniture.

2. For ease and speed of assembly, we recommend that before you

commence each step of the assembly, that you identify all the parts

required for that step.

3. For larger items, please ensure that you have sufficient space and

people (as indicated on page 1) to assemble your product safely.

4. We recommend that, where possible, all items are assembled near to

the area in which they will be placed in use, to avoid moving the product

unnecessarily once assembled.

5. For the protection of your furniture, we recommend that the product is

placed on a protected surface during assembly to prevent any damage.

6. During assembly please take care not to over-tighten any fittings, as this

may damage the product. Only use power tools as stated in the manual.

7. Always place the product on a at, steady and stable surface.

8. Do not stand on the product. Do not use the product as a stepladder.

9. This product is intended for indoor, household use only as it is a non-

industrial product.

10. Please use caution and care when lifting the product to avoid personal

injury and/or product damage.

Part Name

AFTER SALES SUPPORT

0800 222 246NZ

x2 PCS x1 PC x1 PC

x1 PC x1 PC x2 PCS

2 3

456

Part Name

AFTER SALES SUPPORT

0800 222 246NZ

x1 PC x2 PCS x1 PC

7 8

x1 PC

x4 PCS x1 PC

x1 PC x1 PC

A x 12 pcs B x 4 pcs C x 1 pc

E x 4 pcs F x 15 pcs G x 1 pc

D x 1 pc

M4 ST4.2 Wrench

M8 4x4 5x5 2.5x2.5

Assembly

AFTER SALES SUPPORT

0800 222 246NZ

8 PCS 5x5

Assemble (1)&(2)(3) together, use the 5x5 allen key (C) to

tighten the screws(A).

Assembly

AFTER SALES SUPPORT

0800 222 246NZ

5x54x4

4 PCS

Unscrew the screws on supporting beam(4) with the 4x4 allen

key (C), then stretch it (4).

Install Supporting beam(4)

Stretch

Loose

Install supporting beam(4) on the columns(2)(3),

tighten the screw (B) with the 5x5 allen key (C).

Assembly

AFTER SALES SUPPORT

0800 222 246NZ

2.5x2.5

Connect transmission rod (5) with columns (2)(3), and

use the 2.5x2.5 allen key(D) to tighten it.

Do not rotate the angle exceed one

third of the circle.

Assembly

AFTER SALES SUPPORT

0800 222 246NZ

5x5

4 PCS

Connect supporting plate(6) with columns(2)(3). use the

5x5 allen key(C) to tighten the screws(A).

Assembly

AFTER SALES SUPPORT

0800 222 246NZ

Install the adaptor holder (11) to the

supporting beam(4)

14 PCS

Not included

Install the power adaptor

The distance between the two sides

shall not be longer than 200 mm.

The handset should be

installed on the side of the

lifting column with motor.

Install the tabletop, control box

and handset.

Connect the tabletop, control box(14)

and the handset(12) with the screws (F),

then tighten it with pistol electric drill.

4x4

Assembly

AFTER SALES SUPPORT

0800 222 246NZ

Tighten the supporting beam and the transmission rod screw

Use the 4x4 allen key (C) to tighten the 4 screws on the

supporting beam (4), and then tighten the nut on the

transmission rod (5) with the wrench (G).

Install baffle and power adaptor

4 PCS

2.5x2.5

Assembly

AFTER SALES SUPPORT

0800 222 246NZ

Install the bafﬂe (8) to the supporting beam (4) using

screws (E), and then tighten it with the 2.5*2.5 allen

key (D).

Insert

Assembly

AFTER SALES SUPPORT

0800 222 246NZ

Connect all cables to the adaptor (7)

1 2

Tear off Fix them

Manage

cables

You can use the cable tie (10) to sort out the

cables on the table to keep the cables tidy.

Handset

Wire Port

Switch

Cord Port

Motor

Wire Port

Assembly

AFTER SALES SUPPORT

0800 222 246NZ

Item No.: HS29A-1

Operation Instruction

1. Product Outline

2. Product Specification

1.Botton introduction: There are two buttons that "▲" , "▼".

(1) "▲" : Adjust the desk upwards;

(2) "▼" : Adjust the desk downwards;

3. Operating Instructions

●Reset

a. When the desk is at the lowest position, long press the "▼“ button for 5 seconds to

enter the reset mode, the reset will be completed until the lifting system reached bottoms

then rebounds to stop.

b. When the lifting system fails, release the button, long press the "▼“ button, the reset

will be completed until the lifting system reached bottoms then rebounds to stop.

Assembly

AFTER SALES SUPPORT

0800 222 246NZ

Issues and Tips.

The following tips will help you detect and eliminate a common fault and error. If a fault

identified is not listed below, please contact customer services.

●Lifting

Press "▲”or “▼”button to adjust the height of the desk.

●Troubleshooting

If there is no response after pressing the "▲”or “▼” button after working for a period of

time, please rest for more than 18 minutes before using it again.

Assembly

AFTER SALES SUPPORT

0800 222 246NZ

AFTER SALES SUPPORT

0800 222 246NZ

arranty

We pride ourselves on producing a range

of quality home appliances that are both packed with features

and completely reliable. We are so confident in our products,

we back them up with a 2 -year warranty.

Now you too can relax knowing that you are covered.

Customer Helpline NZ: 0800 222 246 This

Product is covered by 2-year warranty

when accompanied by proof of purchase.

STOP

BEFORE

RETURNING

TO STORE

Read the manual.

It will help you get the

best out of your product.

Still have questions?

Call After Sales Support

0800 222 246

WORK SPACE GD1400-F User manual

WORK SPACE GD1400-F User manual

WORK SPACE GD1400-F User manual

Related papers

Other documents