2. nvent
  3. A1008NFAL
A1008NFAL

nvent A1008NFAL User manual

  • I have reviewed the Installation Instructions for the nVent HOFFMAN Grounding Kit Small 87927766. This document outlines the step-by-step process for installing the kit, ensuring proper electrical grounding. I'm ready to answer your questions about the included components and their assembly.
  • What type of screw is used to attach the grounding kit to the panel?
    What type of nut is used with the screw to attach the ground wire?
    Where should the lockwasher be installed?
    What is the purpose of keps nuts?
© 2018 Hoffman Enclosures Inc. PH 763 422 2211 • nVent.com/HOFFMAN 87927816
Rev. B P/N 87927815
Grounding Label
Keps Nut
10−32 Hex Nut
Ground Wire
(not included)
Panel Screw
Lockwasher
10−32x5/16 Screw
For Small Grounding Kit
87927766
Installation Instructions
PANEL SCREWS ENCLOSED
1. Insertthe10−32x5/16screwthroughtheholeinthepanelas
shown.
2. Securescrewwithkepsnut.Thekepsnutsmustpenetrateintothe
painttoinsureelectricalcontinuity.
3. Attachthegroundwireandsecurewith10−32hexnutasshown.
4. Installthelockwasherunderoneofthescrewssecuringthepanel
toinsuregroundingbetweenthepanelandtheenclosure.
5. Attachincludedgroundinglabeladjacenttotheboltasshown.
/