2. Enelion
  3. UNIVERSAL POST
UNIVERSAL POST

Enelion UNIVERSAL POST Installation guide

  • Hello! I have analyzed the provided installation manual for the Enelion Post 130/150 CM. This document outlines the steps for installing the post, including requirements for the installation area, cabling, and mounting options. It details the components included in the set and provides essential information for a successful installation. I'm ready to answer any questions you might have about this product.
  • What is included in the set?
    What are the minimum dimensions of the stable ground surface for installation?
    What is the minimum length of power cables required for the 130 cm post?
    What is the minimum length of power cables required for the 150 cm post?
THE SET INCLUDES:
• post with the height of 130/150 cm – 1 pc,
• Ø40 mm plug for holes – 2 pcs.
REQUIREMENTS FOR THE INSTALLATION AREA:
• minimum dimensions of stable ground surface
– 20 x 20 cm,
• maximum distance between mounting pins – 13 x 13 cm,
• minimum distance between mounting pins – 9 x 9 cm,
• minimum length of power cables:
• 140 cm for post with the height of 130 cm,
• 160 cm for post with the height of 150 cm.
The post can be mounted by screwing it to a ready-made
Enelion prefabricated element, mounting base prepared
from the Enelion foundation kit or directly to a solid, robust
ground surface using suitably strong mounting bolts.
INSTALLATION MANUAL
FOR UNIVERSAL POST 130/150 CM
INTENDED FOR ENELION EV CHARGERS
Place the post close to the installation area in a
horizontal position. Run the power cables through
the post from the base to Ø40 mm holes in the
top part of the post.
Cut holes in Ø 40 mm plugs that are 5 mm smaller
in diameter than the dimension of the power cable.
Put the plugs on the power cables. Insert the plugs
into the holes of the post.
Screw the post to the ground.
min. 160 cm for 150 cm post; min. 140 cm for 130 cm post
/