Garmin IMWW is a device that displays vehicle data via CAN and navigation information from a smartphone app via Bluetooth. It features a PCB module, Bluetooth v2.1+EDR, v4.2 BLE, and supports the SPP profile. The device has a wide operating temperature range of -30° to 80°C and can withstand input voltage from 9 to 16V. It has 64MB of external flash memory and 16MB of external RAM. The device also provides warnings and instructions for RF exposure and installation to ensure safe and compliant operation.
Garmin IMWW is a device that displays vehicle data via CAN and navigation information from a smartphone app via Bluetooth. It features a PCB module, Bluetooth v2.1+EDR, v4.2 BLE, and supports the SPP profile. The device has a wide operating temperature range of -30° to 80°C and can withstand input voltage from 9 to 16V. It has 64MB of external flash memory and 16MB of external RAM. The device also provides warnings and instructions for RF exposure and installation to ensure safe and compliant operation.
IMWW
Quick Guide
Product Outline
Main Characteristics
Operating temperature
range
From -30° to 80°C
Input voltage
From 9 to 16V
Maximum Operating
Current
400mA @12V
Memory
External Flash 64MB(512Mb)
External RAM 16MB(128Mb)
Description
IMWW is a PCB module to display infotainment vehicle
data via CAN and navigation information from
smartphone app via Bluetooth .
Bluetooth
Bluetooth v2.1+EDR, v4.2 BLE,
Support SPP profile
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of
the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
RF exposure warning
End-users and installers must be provide with antenna
installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
Industry Canada statement
This device contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is
below the Industry Canada (IC) radio frequency exposure
limits. The Wireless Device should be used in such a
manner such that the potential for human contact
during normal operation is minimized.
Informations concernant l'exposition aux fréquences
radio (RF)
La puissance de sortie émise par l’appareil de sans fil est
inférieure à la limite d'exposition aux fréquences radio
d'Industry Canada (IC). Utilisez l’appareil de sans fil de
façon à minimiser les contacts humains lors du
fonctionnement normal.
Este equipamento não tem direito à proteção contra
interferência prejudicial e não pode causar interferência
em sistemas devidamente autorizados.
Para maiores informações, consulte o site da ANATEL –
https://www.gov.br/anatel
This product is designed for specific application and
needs to be installed by a qualified personal who has RF
and related rule knowledge. The general user shall not
attempt to install or change the setting
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian
ICES-003 and RSS-210.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation of
the device.
Canada, avis d'Industry Canada (IC)
Cet appareil numérique de classe B est conforme aux
normes canadiennes ICES-003 et RSS-210.
Son fonctionnement est soumis aux deux conditions
suivantes : (1) cet appareil ne doit pas causer
d'interférence et (2) cet appareil doit accepter toute
interférence, notamment les interférences qui peuvent
affecter son fonctionnement.
取得審驗證明之低功率射頻器材，非經核准，公
司、商號或使用者均不得擅自變更頻率、加大功
率或變更原設計之特性及功能。低功率射頻器材
之使用不得影響飛航安全及干擾合法通信；經發
現有干擾現象時，應立即停用，並改善至無干擾
時方得繼續使用。前述合法通信，指依電信管理
法規定作業之無線電通信。低功率射頻器材須忍
受合法通信或工業、科學及醫療用電波輻射性電
機設備之干擾。
本模組於取得認證後將依規定於模組本體標示審
驗合格標籤，並要求最終產品平台廠商(OEM
Integrator)於最終產品平台(End Product)上標示:
本產品內含射頻模組，其 NCC 型式認證號碼為:
CCXXxxYYyyyZzW
Professional installation instruction
Please be advised that due to the unique function supplied by this product FCC
ID:IPH-04484/Model number: IMWW, the device is intended for use with our
interactive entertainment software and licensed third-party only. The product
will be distributed through controlled distribution channel and installed by
trained professional and will not be sold directly to the general public through
retail store.
1. Installation personal
This product is designed for specific application and needs to be
installed by a qualified personal who has RF and related rule
knowledge. The general user shall not attempt to install or change the
setting.
2. Installation location
The product shall be installed at a location where the radiating antenna
can be kept 20cm from nearby person in normal operation condition to
meet regulatory RF exposure requirement.
3. Installation procedure
Please refer to user’s manual for the detail.
4. Warning
Please carefully select the installation position and make sure that the
final output power does not exceed the limit set force in relevant rules.
The violation of the rule could lead to serious federal penalty.
Instructions d'installation professionnelle
Veuillez noter que l'appareil etant dedie a une fonction unique, il doit etre
utilise avec notre logiciel proprietaire de divertissement interactif . Ce produit
sera propose par un reseau de distribution controle et installe par des
professionels; il ne sera pas propose au grand public par le reseau de la
grande distribution.
1. Installation
Ce produit est destine a un usage specifique et doit etre installe par un
personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant.
L'installation et les reglages ne doivent pas etre modifies par l'utilisateur
final.
2. Emplacement d'installation
En usage normal, afin de respecter les exigences reglementaires
concernant l'exposition aux radiofrequences, ce produit doit etre installe de
facon a respecter une distance de 20 cm entre l'antenne emettrice et les
personnes.
3. Procedure d'installation
Consulter le manuel d'utilisation.
4. Avertissement
Choisir avec soin la position d'installation et s'assurer que la puissance de
sortie ne depasse pas les limites en vigueur. La violation de cette regle peut
conduire a de serieuses penalites federales.
-
1
-
2
-
3
-
4
-
5
Garmin IMWW is a device that displays vehicle data via CAN and navigation information from a smartphone app via Bluetooth. It features a PCB module, Bluetooth v2.1+EDR, v4.2 BLE, and supports the SPP profile. The device has a wide operating temperature range of -30° to 80°C and can withstand input voltage from 9 to 16V. It has 64MB of external flash memory and 16MB of external RAM. The device also provides warnings and instructions for RF exposure and installation to ensure safe and compliant operation.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Garmin IMWW Mode d'emploi
Other documents
-
Epic ES-7000K User manual
-
Zenner OD2 User manual
-
Aerohive WBV-AP3X0 User manual
-
Huawei B2338-168IDU Quick start guide
-
ZyXEL NAP102 User manual
-
Samsara VG54 User manual
-
Sonim XPand User manual
-
Trendnet TEW-840APBO Quick Installation Guide
-
Extreme Networks AP5050U Reference guide
-
Trendnet RB-TEW-840APBO2K Quick Installation Guide
