Edge & Verge Modeling Condenser Microphones User Manual
10
Edge Quadro is a quad-membrane condenser microphone it has two heads, each with
dual membranes. The Top head rotates 360-degrees, enabling stereo recording tech-
niques such as M/S, X/Y, Blumlein, and even 3D sound. Therefore, the microphone is
bundled with a pair of Y-XLR cables. Their Left (White or Blue *) connectors are for the
front membranes, and their Right (red) connectors are for the rear membranes.
* Later Edge Quadro revisions ship with Red and Blue Y-cables instead of Red and White
Y-cables. The difference is purely cosmetic. Thus, the Blue connector corresponds to the
older White connector.
However, each cable is designated for either the Top or Bottom head, and labeled ac-
cordingly T (Top) or B (Bottom). The inputs on the microphone are labeled too, letting
you know where each cable needs to be connected.
options for connecting Edge Quadro
As a single-membrane (rotatable) condenser mic. Connect just one XLR from the Top
(rotatable) or Bottom head using the corresponding cable. The possible configurations
are:
1. Top Head Front Membrane.
2. Top Head Rear Membrane.
3. Bottom Head Front Membrane.