Gamber-Johnson 7160-1035 Installation guide

7160-1035
Gamber-Johnson
Brand
Gamber-Johnson
Model
7160-1035
Category
Car kits
Type
Installation guide

This manual is also suitable for

Gamber-Johnson 7160-1035, a ZIRKONA MAX3 to 3 Stud GJ Adapter Plate, allows for the secure attachment of ZIRKONA MAX3 accessories to a variety of surfaces, including top plates, vehicle bases, and risers. These adapter plates are designed to provide a stable and reliable mounting solution, ensuring your ZIRKONA MAX3 accessories remain securely in place even in demanding environments.

Gamber-Johnson 7160-1035, a ZIRKONA MAX3 to 3 Stud GJ Adapter Plate, allows for the secure attachment of ZIRKONA MAX3 accessories to a variety of surfaces, including top plates, vehicle bases, and risers. These adapter plates are designed to provide a stable and reliable mounting solution, ensuring your ZIRKONA MAX3 accessories remain securely in place even in demanding environments.

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Rev.A
INST-809
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Revision
© Copyright 2017 Gamber-Johnson, LLC
7160-1034, 7160-1035
ZIRKONA MAX3 TO GJ ADAPTERS
Form
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
PS-001
Printing Spec:
Product
INSTALLATION INSTRUCTIONS
2.
the 3/8-16 carriage bolts, washers and nuts
coupling.
accessory to the adapter plate threaded
7160-1034
ZIRKONA MAX3 TO GJ ADAPTER PLATE
3. Attach the male threaded Zirkona MAX3
included in the hardware bag.
accessory to the adapter plate threaded
coupling.
through the keyhole slots in the top plate
and tighten.
If attaching to a vehicle base or riser use
start the nuts. Drop the carriage bolt heads
bolts through the plate and facing upward
7160-1034, To Install:
If attaching to a top plate use the 1/4-20 1.
carriage bolts, washers and nuts included
in the hardware bag. With the carriage
7160-1035, To Install:
Place the studs through the top plate or 1.
accessory that features a 3 bolt hole or
'smiley face' bolt pattern.
Install the washers and lock nuts included in 2.
the hardware bag and tighten.
Attach the male threaded Zirkona MAX3 3.
7160-1035
ZIRKONA MAX3 TO 3 STUD GJ ADAPTER PLATE
  • Page 1 1

Gamber-Johnson 7160-1035 Installation guide

7160-1035
Gamber-Johnson
Brand
Gamber-Johnson
Model
7160-1035
Category
Car kits
Type
Installation guide
This manual is also suitable for

Gamber-Johnson 7160-1035, a ZIRKONA MAX3 to 3 Stud GJ Adapter Plate, allows for the secure attachment of ZIRKONA MAX3 accessories to a variety of surfaces, including top plates, vehicle bases, and risers. These adapter plates are designed to provide a stable and reliable mounting solution, ensuring your ZIRKONA MAX3 accessories remain securely in place even in demanding environments.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents