Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas
Range on Electric Oven, 2 Sides
with Ecoflam
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range on Electric Oven, 2 Sides
with Ecoflam
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range on
Electric Oven, 2 Sides with Ecoflam
584253 (GC1G23A2CF)S90 4 OPEN GAS BURNERS
(82,000 BTU), ELECTRIC
OVEN, 2SIDE OPERATION
WITH ECOFLAM
Unit to be Electrolux S90 Heavy Duty two 17,000 BTU (5 kW) and two 24,000
BTU (7 kW) burner gas range on electric oven with ecoflam. Electric
characteristics to be 400V three phase. Unit to be installed in central island
type installations with operations from both sides. High efficiency burners
with continuous power regulations to high power of 82,000 BTU’s (24 kW).
Thermocouples as standard on burners and oven for added safety. Body
and open base of unit entirely in 304 Stainless steel. Pan supports in heavy
duty cast iron. Unit shall have heavy duty 304 Stainless steel internal frame
with reinforcement on the top of 3 mm. Extra strength work top in heavy
duty 3 mm Stainless steel. “Lastertec” connection system permits units to
be connected to each other creating a seamless work top.
Main Features
•Unit for island type installation with operations by chef from
both sides (knobs on both sides of the console).
•The two 5 kW and two 7 kW high efficiency burners suit high
performing cooking requirements for the most demanding
customers.
•Model is supplied with Ecoflam pan detection system, which
saves energy and reduces unnecessary heat radiation in the
kitchen.
•Manual gas valves with fixed high and low positions allow
precise control of the flame intensity.
•Large sized pan support in cast iron (stainless steel as
option) with long center fins to allow the use of the largest
down to the smallest pans.
•Base compartment consists of an electric heated standard
oven for base heat. Ovens equipped with one chrome plated
grid and one enameled baking tray.
•Oven temperature up to 350 °C
•Thick steel base plate in the oven for an even temperature
distribution and storage.
•Flat deep drawn spillage area with removable pan supports,
burner rings and flame ignition parts.
•Heavy duty internal frame in 304 type Stainless steel with
reinforcement on top of 3 mm.
•3 mm top in 304 type Stainless steel.
•“Lasertec connection system” creates seamless work top
when units are connected to each other.
•Unit delivered with four 200 mm legs as standard (all round
Stainless steel kick plates as option).
Included Accessories
•1 of Baking sheet 2/1 GN for ovensPNC 910651
•1 of Grid, chromium plated, for ovens 2/1
GN
PNC 910652
•4 of Cast-iron pan rest for 3,5-5-7Kw
burner, 430x380mm
PNC 911912
Optional Accessories
•Solid top plate for open burner,
360x360mm
PNC 910718 ❑
•Flexible connection hose 3/4"PNC 910720 ❑
•Pan rest CNS, 430x380mmPNC 910729 ❑
•Side panel, freestanding installations (units
without rear C-board)
PNC 911527 ❑
•Stainless steel front and back kicking
strips, 1000mm
PNC 911533 ❑
•Portioning shelf, 1000mm widthPNC 911856 ❑
•Portioning shelf, 1000mm widthPNC 911878 ❑