Best Fitness BFRB1 Owner's manual

Brand: Best Fitness

Model: BFRB1

Category: Fitness, gymnastics & weight training

Type: Owner's manual

v. 072913

BFRB1

OWNER’S MANUAL

TABLE OF CONTENTS

I. BEFORE YOU BEGIN...........................................

II. IMPORTANT SAFETY INSTRUCTIONS...............

III. FEATURES.............................................................

IV. DIMENSIONS.........................................................

V. ASSEMBLY INSTRUCTIONS................................

VI. SETTING UP YOUR BFRB1.................................

VII. CONSOLE FEATURES..........................................

VIII. CONSOLE DISPLAY FEATURES..........................

IX. CONSOLE OPERATION........................................

X. EXERCISE TIPS AND GUIDELINES.....................

XI. TROUBLESHOOTING...........................................

XII. SERVICING THE BFRB1......................................

XIII. HARDWARE PACK LIST.......................................

XIV. PART LIST.............................................................

XV. EXPLODED VIEW DIAGRAM...............................

XVI. NOTES..................................................................

8 – 27

28 – 29

32 – 37

38 – 39

42 – 44

45 – 47

48 – 49

50 – 51

www.BestFitness.com

Thank you for purchasing the Best Fitness Recumbent Bike BFRB1.

To maximize your use of the equipment please study this Owner’s Manual thoroughly.

Unpacking the Equipment

The BFRB1 is carefully tested and inspected before shipment. We have shipped the unit

in several pieces that require assembly. Ask for assistance during the assembly process.

BEFORE YOU BEGIN

Best Fitness Equipment continually seeks ways to improve the performance, specications and product manuals in order to ensure

that only superior products are released from our factories. Please take the time to carefully read through this manual thoroughly.

Instructions contained in this document are not intended to cover all details or variations possible with Best Fitness Equipment, or to

cover every contingency that may be met in conjunction with installation, operation, maintenance or troubleshooting of the equipment.

Even though we have prepared this manual with extreme care, neither the publisher nor the author can accept responsibility for any

errors in, or omission from, the information given. Should additional information be required, or should situations arise that are not

covered by this manual, the matter should be directed to your local Best Fitness Equipment representative, or the Service Department

at Best Fitness Equipment in Forest Park, Illinois.

Any Questions?

Call (800) 556-3113

IMPORTANT SAFETY INSTRUCTIONS

B



Il est conseille de subir un examen medical complet avant d’entreprendre tout programme d’exercise. Si vous avez des

etourdissements ou des faiblesses, arretez les exercices immediatement.

Antes de comenzar cualquier programma de ejercicios, deberias tener un examen sico con su doctor.

WHEN USING EXERCISE EQUIPMENT, YOU SHOULD ALWAYS TAKE BASIC

PRECAUTIONS, INCLUDING THE FOLLOWING:

• Read all instructions before using the BFRB1. These instructions are written to ensure your

safety and to protect the unit.

• Do not allow children on or near the equipment.

• Use the equipment only for its intended purpose as described in this guide. Do not use ac-

cessory attachments that are not recommended by the manufacturer. Such attachments

might cause injuries.

• Wear proper exercise clothing and shoes for your workout, no loose clothing.

• Use care when getting on or off the unit.

• Do not overexert yourself or work to exhaustion.

• If you feel any pain or abnormal symptoms, stop your workout immediately and consult your

physician.

• Never operate the unit when it has been dropped or damaged. Return the equipment to a

service center for examination and repair.

• Never drop or insert objects into any opening in the equipment.

• Always check the unit before each use. Make sure that all fasteners are secure and in good

working condition.

• Do not use the equipment outdoors or near water.

PERSONAL SAFETY DURING ASSEMBLY

• It is strongly recommended that a qualied dealer assemble the equipment. Assistance is

required.

• Before beginning assembly, please take the time to read the instructions thoroughly.

• Read each step in the assembly instructions and follow the steps in sequence. Do not skip

ahead. If you skip ahead, you may learn later that you have to disassemble components and

that you may have damaged the equipment.

• Assemble and operate the BFRB1 on a solid, level surface. Locate the unit a few feet from

the walls or furniture to provide easy access.

The BFRB1 is designed for your enjoyment. By following these precautions and using common

sense, you will have many safe and pleasurable hours of healthful exercise with your Best Fit-

ness

BFRB1.

After assembly, you should check all functions to ensure correct operation. If you experience

problems, rst recheck the assembly instructions to locate any possible errors made during as-

sembly. If you are unable to correct the problem, call the dealer from whom you purchased the

machine or call 1-800-556-3113 for the dealer nearest you.

FEATURES

CONTACT HEART

RATE SENSORS

CONSOLE

TENSION ADJUSTMENT

FULLY SHROUDED FLYWHEEL

PEDALS

ERGONOMIC HANDLE BARS

TRANSPORT WHEELS

FULLY

ADJUSTABLE SEAT

DIMENSIONS

1000mm (39.4”)

645mm (25.4”)

1300mm (51.2”)

The room layout diagram below will help you decide the best placement for your BFRB1.

The dimensions of the BFRB1 are: Width 645mm (25.4”) X Length 1300mm (51.2”) X Height

1000mm (39.4”) .

The recommendated usage space is: Width 1080mm (42.5”) X Length 2040mm (80.2”) .

The usage space needed for the BFRB1 could be more, depending on the user.

The Maximun User Weight is 100kg (220lb)

Assembly of the BFRB1 takes professional installers about 1/2 hour to complete. If this is

the rst time you have assembled this type of equipment, plan on signicantly more time.

Professional installers are highly recommended!

However, if you acquire the appropriate tools, obtain assistance, and follow the assembly

steps sequentially, the process will take time, but is fairly easy.

ASSEMBLY TIPS

Read all “Notes” on each page before begin-

ning each step.

While you may be able to assemble the BFRB1

using the illustrations only, important safety

notes and other tips are included in the text.

Some pieces may have extra holes that you

will not use. Use only those holes indicated in

the instructions and illustrations.

NOTE: To nd out the length of a particular

bolt, measure its shank (the long, narrow part

beneath the head).

Refer to the following diagram:

NOTE: After assembly, you should check all

functions to ensure correct operation. If you

experience problems, rst recheck the assem-

bly instructions to locate any possible errors

made during assembly.

If you are unable to correct the problem, call

the dealer from whom you purchased the ma-

chine or call 1-800-556-3113 for the dealer

nearest you.

ASSEMBLY INSTRUCTIONS

Be careful to assemble all components

in the sequence they are presented.

A. Disconnect Rear Main Frame (B) from Front Main Frame (A) by loosening:

Two M8x15mm Button Head Cap Screws (#20)

Two M8 Flat Washer(#21)

B. Fasten the two M8x15mm Button Head Cap Screws (#20) and two M8

Flat Washers (#21) back to the holes on the Rear Main Frame (B) as shown

from the drawing.

STEP

Above shows STEP 1 assembled and completed.

Be careful to assemble all components

in the sequence they are presented.

A. Attach Front Stabilizer (C) to Front Front Main Frame (A) using:

Two M8x73mm Carriage Bolts (#33)

Two M8 Curved Washers (#13)

Two M8 Acorn Nuts (#6)

B. Connect Pulse Wires (#26 & #10) together.

C. Attach Rear Main Frame (B) to Front Main Frame (A) using:

Six M8x15mm Button Head Cap Screws (#20)

Six M8 Flat Washers (#21)

Six M8 Lock Washers (#29)

D. Attach Rear Stabilizer (D) to Rear Main Frame (B) using:

Two M8x90mm Carriage Bolts (#4)

Two M8 Curved Washers (#5)

Two M8 Acorn Nuts (#6)

STEP

Above shows STEP 2 assembled and completed.

Be careful to assemble all components

in the sequence they are presented.

STEP

A. Put the Seat Tube (E) on the U Bracket of Rear Main Frame (B). Put the U

Bracket with Bolt (#18) of Seat Tube through the hole of the Rear Main

Frame (B). Secure them using:

One M10 Flat Washer (#17)

One Seat Adjustment Knob (#16)

STEP

Above shows STEP 3 assembled and completed.

Be careful to assemble all components

in the sequence they are presented.

A. Attach Backrest (F) to Seat Tube (E) using:

Four M8x15mm Button Head Cap Screws (#20)

Four M8 Flat Washers (#21)

STEP

Above shows STEP 4 assembled and completed.

Be careful to assemble all components

in the sequence they are presented.

A. Attach Seat (G) to Seat Tube (E) using:

Four M8x15mm Button Head Cap Screw (#20)

Four M8 Flat Washer (#21)

STEP

Above shows STEP 5 assembled and completed.

Be careful to assemble all components

in the sequence they are presented.

A. Connect Pulse Wires (#10 & #14) together.

NOTE: Carefully t the wires back into the holes of Rear Main Frame (B)

B. Attach Handrails (H & J) to Rear Main Frame (B) using

Two M8x80mm Button Head Cap Screws (#12)

Two M8 Flat Washers (#21)

Two M8 Acorn Nuts (#6)

STEP

Above shows STEP 6 assembled and completed.

Be careful to assemble all components

in the sequence they are presented.

A. Connect Pedal L (L) to Crank L (34) by threading Pedal L counter-clockwise

as shown.

B. Connect Pedal R (K) to Crank R (35) by threading Pedal R clockwise as

shown.

STEP

Page is loading ...

Best Fitness BFRB1 Owner's manual

Brand: Best Fitness

Model: BFRB1

Category: Fitness, gymnastics & weight training

Type: Owner's manual

Download PDF

report

Best Fitness BFRB1 Owner's manual

Best Fitness BFRB1 Owner's manual

Related papers

Other documents