Xerox 4635 Laser Printing System User guide

Category
Software
Type
User guide

This manual is also suitable for

Xerox 4635 Laser Printing System
Operations Reference
January 1996
721P83021
Xerox Corporation
701 S. Aviation Boulevard
El Segundo, CA 90245
© 1994, 1995, 1996 by Xerox Corporation. All rights reserved.
Copyright protection claimed includes all forms and matters of
copyrightable material and information now allowed by statutory
or judicial law or hereinafter granted, including without limitation,
material generated from the software programs which are
displayed on the screen, such as icons, screen displays, looks,
etc.
Printed in the United States of America
Publication number: 721P83021
Xerox® and all Xerox products mentioned in this publication are
trademarks of Xerox Corporation. Products and trademarks of
other companies are also acknowledged.
DEC and VAX are trademarks of Digital Equipment Corporation.
IBM and all IBM products mentioned are trademarks of
International Business Machines, Inc.
WARNING: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user
will be requied to correct the interference at his own expense.
Changes are periodically made to this document. Changes,
technical inaccuracies, and typographic errors will be corrected in
subsequent editions.
This document was created on the Xerox 6085 Professional
Computer System using VP software. The typeface is Optima.
Related publications
The Xerox 4635 Laser Printing System Operations Reference is
part of the ten-manual reference set for your laser printing
system. The entire reference set is listed in the table below.
Several other related documents are also listed for your
convenience. For a complete list and description of available
Xerox documentation, refer to the Xerox Documentation Catalog
(Publication number 610P17417) or call the Xerox
Documentation and Software Services (XDSS) at 1-800-445-5554.
Publication Number
Xerox Dynamic Document Interface
Operator Guide
720P13670
Xerox Dynamic Document Interface
Command Summary
720P13680
Xerox 4635 Laser Printing System
Operator Guide
721P83011
Xerox 4635 Laser Printing System
Operations Reference
721P83021
Xerox 4635 Laser Printing System
System Generation (Sysgen) Guide
721P83030
Xerox 4635 Laser Printing System
Message Guide
721P83040
Xerox 4635 Laser Printing System
PDL/DJDE Reference
721P83050
Xerox 4635 Laser Printing System
Forms Creation Guide
721P83060
Xerox 4635 Laser Printing System
Product Reference
721P83071
Xerox 4635 Laser Printing System
Installation Planning Guide
721P83081
Xerox 4635 Laser Printing System
Operator Command Summary Card
721P83090
Xerox 4635 Laser Printing System
PC UI Reference
721P83101
Xerox Laser Printing Systems
Tape Formats Manual
600P86175
Xerox Laser Printing Systems
Standard Font Library Font User Guide
600P86174
Helpful Facts About Paper 721P82490
XEROX 4635 LPS OPERATIONS REFERENCE iii
Notice
This publication may contain descriptions of concepts and
features not currently available for your Xerox Laser Printing
System. Consult your Xerox sales representative or your
operating system software program description for additional
information.
iv XEROX 4635 LPS OPERATIONS REFERENCE
Table of contents
Related publications iii
Notice iv
Introduction INTRO-1
About the reference set INTRO-1
4635 Laser Printing System document set INTRO-1
Who should use this manual INTRO-4
LPS system administrators, programmers, operators INTRO-4
4635 LPS INTRO-4
4635 system controller components INTRO-5
4635 tape and cartridge devices INTRO-6
4635 printer components INTRO-7
How to use this manual INTRO-8
If the LPS is new to you INTRO-8
Know the key terms and conventions INTRO-8
Use the table of contents, index, and INTRO-8
Refer to the related publications list INTRO-8
Key terms and conventions INTRO-8
Key terms INTRO-8
Syntax conventions INTRO-9
Masking conventions INTRO-9
Contents of this manual INTRO-10
Statement command summaries
and appendices INTRO-11
1. Setting LPS parameters 1-1
Communicating with the LPS 1-1
Installation and system generation 1-2
PC UI 1-2
Terminal 1-3
Powering on and booting the LPS 1-3
User interface 1-3
PC UI 1-3
Terminal 1-3
Power loss 1-4
System verification messages 1-5
XEROX 4635 LPS OPERATIONS REFERENCE v
TABLE OF CONTENTS
Printer communication link 1-6
PSC (printer subsystem controller) 1-7
Configure a finishing or feeding device 1-8
Create the FCG.LIB file 1-8
FCG (display the profile labels) 1-12
FCG (configure a finishing or feeding device) 1-12
FCG SHOW (check finishing or feeding device settings) 1-13
FCG procedures 1-13
Verifying LPS status 1-14
Verifying system version and time 1-14
OCS (system version display) 1-14
Time and date displays 1-14
Verifying system status 1-15
PROBLEM 1-15
Setting LPS parameters 1-17
Setting system parameters 1-17
SETTIME (set time or date) 1-17
ALIGN (set page print alignment) 1-17
DISPLAY (set display format for messages) 1-19
ENERGY 1-19
MICR (set MICR mode) 1-20
BAR (set bar code reader state) 1-20
Setting parameters for print jobs 1-21
Reallocating space to the print file 1-21
REA (reallocate print file) 1-21
REA and disk management 1-23
REA and online report spooling 1-24
Setting job parameters 1-24
FONTS 1-24
FORMS 1-25
GRAPHIC 1-25
Adjusting print image darkness 1-25
DARKNESS 1-25
Lightening high-density images 1-26
EDGE 1-26
Finishing Exerciser Utility 1-26
FEX 1-26
Setting file access and task execution privileges 1-28
Protecting access to files 1-28
LOGON (restrict file access) 1-28
vi XEROX 4635 LPS OPERATIONS REFERENCE
TABLE OF CONTENTS
SECURE (restrict file access) 1-29
Secured files, access, and manipulation 1-29
Security breach 1-29
Limiting task execution privileges 1-30
RCU (restrict command usage) 1-30
2. Managing LPS resources 2-1
Maintaining optimal disk usage 2-1
Files on system disks 2-1
Operating on system files 2-1
Necessary free space on system disks 2-3
File biasing by disk configuration 2-4
Checking usage of disk space 2-5
FCHECK (file check) 2-5
Reorganizing usage of disk space 2-8
COMPRESS 2-8
PURGE 2-10
Backing up and copying system files 2-10
Setting default tape device 2-10
Identify current TAPE & CARTRIDGE device (SUB DEV) 2-10
SUBSTITUTE DEVICE (general information) 2-11
Assign a controller device to TAPE or CARTRIDGE
(SUB DEV) 2-12
Know the Xerox tape and cartridge format 2-13
Prepare the tape or cartridge 2-14
TAPE [CARTRIDGE|TDn] VOLINIT 2-14
Copying files 2-14
COPY (disk to disk) 2-14
COPY (disk to labeled tape or cartridge) 2-15
COPY (disk to unlabeled tape) 2-16
COPY (labeled tape or cartridge to disk) 2-16
COPY (unlabeled tape to disk) 2-18
Manipulating files 2-19
DELETE 2-19
FID (build file list) 2-19
FILE (display file list 2-20
FIX (modify font or logo file) 2-22
REVIEW (review files) 2-22
RNAME (rename a file or directory) 2-23
TYPE 2-23
List tape or cartridge files 2-24
XEROX 4635 LPS OPERATIONS REFERENCE vii
TABLE OF CONTENTS
TAPE [CARTRIDGE|TDn] LIST 2-24
Locate tape or cartridge files 2-25
TAPE [CARTRIDGE|TDn] FIND (find file) 2-25
TAPE [CARTRIDGE|TDn] NEXT (move to next file) 2-26
TAPE [CARTRIDGE|TDn] SKIP (move to 1st or
2nd...file) 2-26
TAPE [CARTRIDGE|TDn] EOF or NOEOF or ENDFILE 2-26
Backing up system files to tape or cartridge 2-28
DSR (disk save and restore) 2-28
Starting DSR 2-29
File protection 2-30
Disk space for restore 2-31
Multivolume files 2-31
Device error handling 2-32
Aborting the save process 2-32
Incomplete restoration 2-32
Aborting the restore process 2-32
Special file handling 2-32
Copying a DSR file to the LPS 2-33
SFT (single file transfer utility) 2-33
Backing up disk files to PC UI 2-36
Know LPS disk file attributes 2-36
Convert the console log 2-36
Convert files with supported formats 2-36
Delete LPS or PC UI floppy files 2-37
Copy LPS or PC UI floppy files 2-37
List LPS or PC UI floppy files 2-37
Transfer files between the LPS and PC UI 2-37
Managing files on floppy disks 2-38
FLOPPY FORMAT 2-38
FLOPPY SAVE 2-38
FLOPPY DELETE 2-40
FLOPPY CLEAR 2-40
FLOPPY FILE 2-40
FLOPPY FCHECK 2-41
FLOPPY RESTORE 2-42
FLOPPY LIST 2-43
Copying the system software tape 2-43
SST (system software tape or cartridge) 2-43
viii XEROX 4635 LPS OPERATIONS REFERENCE
TABLE OF CONTENTS
3. Tracking system activity 3-1
Accounting data in the status file 3-1
How the system adds data to the status file 3-1
Status file creation during sysgen 3-1
Backing up status file information 3-2
Status file data in the online accounting page 3-3
Status file data 3-4
DATE entry 3-4
DEPARTMENT entry 3-4
JOB ID entry 3-4
REPORT NO. entry 3-4
FILE ID entry 3-4
INPUT PROCESSING TIME entry 3-4
OUTPUT PROCESSING TIME entry 3-4
Report completion codes 3-4
PAGES TO BIN entry 3-6
PAGES TO TRAY entry 3-6
PAPER PATH HOLES entry 3-6
GRAPHIC PAGES PRINTED entry 3-6
LINES PRINTED entry 3-6
GRAPHIC EXCEPTION CODE entry 3-7
ONLINE IDLE (SEC) entry 3-7
TAPE MOUNTS entry 3-7
BLOCKS READ entry 3-7
BLOCKS SKIPPED entry 3-7
RECORDS READ entry 3-7
DJDE RECORDS READ entry 3-7
MAXIMUM COPY COUNT entry 3-7
OVERPRINTS entry 3-7
COLLATE entry 3-8
SF/MF entry 3-8
SIMPLEX/DUPLEX entry 3-8
JDE, JDL USED entry 3-8
ACCTINFO entry 3-8
INITIAL FONT LIST entry 3-8
INITIAL FORM LIST entry 3-8
INITIAL CME LIST entry 3-9
Using accounting and system activity commands 3-9
Generating system activity reports 3-9
REPORT 3-9
XEROX 4635 LPS OPERATIONS REFERENCE ix
TABLE OF CONTENTS
Establishing accounts and copying account data to tape 3-13
ACCOUNT 3-13
Tape format of data written by ACCOUNT 3-14
Modifying the status file 3-16
SFS (status file services) 3-16
SFS CLEAR 3-17
SFS CREATE 3-17
SFS DISPLAY 3-18
SFS file-name 3-20
SFS HARDCOPY 3-21
SFS HOST 3-23
SFS TAPE 3-23
SFS TDn 3-24
SFS ? 3-24
SFS ! 3-25
Creating the SFS user form file 3-25
Tape format of data written by SFS 3-27
Structure of an SFS report entry 3-29
Forward and backward pointers 3-31
Dumping the status file to tape 3-31
Audit log 3-31
Waste Management using the Audit Log Utility 3-31
Audit log utility 3-31
Audit log window 3-31
Audit log print options window 3-32
Audit logdisplay options window 3-39
Audit log display window 3-39
Audit log save window 3-39
Audit log search window 3-39
Reconciliation error window 3-39
Sequence error window 3-40
State date window 3-40
Audit log constraints/exceptions 3-40
Audit log administration utility 3-41
Audit log administration window 3-41
Audit log default options window 3-41
Audit logdisk usage window 3-41
XPS 3-42
x XEROX 4635 LPS OPERATIONS REFERENCE
TABLE OF CONTENTS
4. Editing source files 4-1
What the editor is 4-1
How the editor works 4-1
Source files 4-1
Viewing source files 4-1
Storing source files 4-2
Files you can edit 4-2
Editor commands 4-4
Three types of editor commands 4-4
Composite editor commands 4-4
Editor syntax conventions 4-5
Using the <TAB> key 4-5
Stack printing 4-6
Running an editing session 4-6
EDIT 4-6
CONVERT 4-7
NOCONVERT 4-7
GET 4-7
KEYS 4-8
MERGE 4-8
SAVE 4-8
CLEAR 4-9
END 4-9
Modifying records 4-10
DISPLAY (display lines) 4-10
DUPLICATE (copy lines) 4-11
FIND (find lines with match) 4-11
INSERT (insert lines) 4-11
MODIFY (modify lines) 4-12
MOVE (move lines) 4-12
PRINT (print lines) 4-13
REMOVE (delete lines) 4-13
RENUMBER (renumber lines) 4-14
REPLACE (substitute lines) 4-14
SORT (sort lines) 4-14
STEP (display next line) 4-15
Modifying parts of records 4-16
C (change string) 4-16
D (delete string) 4-16
P (insert prior) 4-17
XEROX 4635 LPS OPERATIONS REFERENCE xi
TABLE OF CONTENTS
F (insert following) 4-17
O (overlay string) 4-17
S (substitute string) 4-18
Examples of editor sessions 4-19
Create and save a .JSL file 4-19
Modify and resave the .JSL file 4-19
List other .JSL files and insert one into the .JSL file 4-20
5. Using command files 5-1
Command files 5-1
System, editor, and font editor command files 5-1
Using system command files 5-1
Operator entries during execution 5-2
Error processing 5-2
.PAUSE processing 5-2
.WAIT processing 5-2
Using editor command files 5-3
Points to note 5-4
Using font editor command files 5-4
Verifying command file type 5-4
.BCP 5-4
Commands in command files 5-5
Displaying messages 5-5
Documenting the command file 5-5
Summary table of command file commands 5-6
Using the basic command file commands 5-6
.CHAIN 5-6
.DELAY 5-7
.EXIT 5-7
.HOME 5-7
.PAUSE 5-7
.WAIT 5-8
Using the logical processing command file commands 5-8
Using symbol setting commands 5-8
Using string substitution commands 5-9
Using sequence control commands 5-9
Using debugging commands 5-10
Sample command files 5-10
Editor command file to delete files 5-10
Sample verification of command file type 5-11
xii XEROX 4635 LPS OPERATIONS REFERENCE
TABLE OF CONTENTS
6. Editing font files 6-1
Reference documentation for fonts 6-1
Font editor 6-1
How to use the font editor 6-1
Summary table of font editor commands 6-3
Running a font editing session 6-4
Messages during the session 6-4
Starting a font editor session 6-4
Reordering a font file 6-5
REORDER and FEDIT 6-5
Specifying the primary source font file 6-5
FEDIT 6-5
INPUT 6-6
Selecting characters using the correct mode 6-7
Specifying new font file characters 6-7
INCLUDE 6-8
SUBSTITUTE 6-8
RECODE 6-9
Using a secondary source font file 6-9
OPEN 6-10
CLOSE 6-10
Closing font file without using CLOSE 6-11
Saving font files you create 6-11
OUTPUT 6-11
Ending the font editing session 6-12
END 6-12
7. LPS print processing 7-1
Overview 7-1
Laser printing systems (LPS) 7-1
LPS component types 7-1
LPS hardware components 7-2
Advanced imaging subsystem (AIS) 7-2
LPS software components 7-2
Three LPS user roles 7-5
System administrator role 7-5
Programmer role 7-6
Operator role 7-6
Key terms in job processing 7-7
Job flow overview 7-7
XEROX 4635 LPS OPERATIONS REFERENCE xiii
TABLE OF CONTENTS
Input sources 7-7
Job flow 7-7
Preparing for a print job 7-7
Job flow steps 7-9
Input processing 7-11
Output processing 7-13
Operator interaction with input and output processing 7-14
LPS processing status 7-17
Types of LPS processing 7-19
Utility, command, compiler, and editor processing 7-19
Running utilities 7-19
Executing command files 7-20
Running compilers 7-20
Running editors 7-21
Online printing systems 7-21
Channel-attached LPS 7-21
System generation 7-21
Online 3211/4245 mode 7-22
Print description language (PDL) statements 7-22
Copy-sensitive copy modification entries (CMEs) 7-23
Report separation 7-23
Universal character set buffers (UCSBs) 7-23
Forms control buffer (FCB) 7-24
Online record length 7-25
Points to note 7-26
Operating the system 7-28
Placing the system online or offline 7-28
Starting an online job 7-28
Monitoring online operations 7-28
Printing all completed pages 7-28
Ending an online job 7-29
Multicopy disk saturation 7-29
Handling MOUNT FORM message 7-30
Host-induced idle time 7-31
Online recovery 7-32
Online dump 7-32
Starting and ending dump sessions 7-32
Dump format 7-33
Points to note 7-33
xiv XEROX 4635 LPS OPERATIONS REFERENCE
TABLE OF CONTENTS
Downloading files from the host to the LPS 7-34
Valid download file types 7-34
HOSTCOPY 7-35
Card-image format files 7-35
Font and logo tape file format 7-36
File transmission 7-36
DJDE FILE 7-38
Card-image file processing 7-38
LPS-labeled file processing 7-39
Delimited records for LPS-labeled files 7-40
Small print files and online report control 7-40
LEASH 7-40
8. HIP processing on the LPS 8-1
HIP-accessed communication modes 8-1
Initiating communications 8-1
Operator commands 8-2
HIP 8-2
HIP ABORT 8-2
HIP CONCATENATE 8-3
HIP CHANGE 8-4
HIP DRAIN 8-4
HIP END 8-5
HIP EXIT 8-5
HIP HOST 8-5
HIP JOBS 8-6
HIP LOG 8-6
HIP OFFLINE 8-6
HIP OFFLINE and END processing with XNS host 8-7
HIP ONLINE 8-7
HIP RESET 8-8
HIP SHOW BUFFER 8-8
HIP SHOW HOSTS 8-8
HIP SHOW JOBS 8-8
HIP SHOW LOG 8-13
HIP SHOW VERSION 8-14
HIP SJC 8-14
HIP SLC 8-14
HIP START 8-14
HIP STOP 8-16
XEROX 4635 LPS OPERATIONS REFERENCE xv
TABLE OF CONTENTS
HIP library commands 8-16
ACCEPT 8-17
ACFILES 8-17
ACREPORTS 8-18
BLOCKSIZE 8-18
BUFFERSIZE 8-19
CONCATENATE 8-19
DRAINTIMER 8-20
ENETMAXCONS 8-20
HOST 8-20
LOGENTRIES 8-20
MAXXNSPKTSIZE 8-21
NAME 8-21
QUEUESIZE 8-21
STARTCOMMANDS 8-21
XNSJOB 8-23
XPFJOB 8-23
XPSJOB 8-23
XOPERATIONS 8-23
Nonprint transfer file control 8-24
File recovery 8-25
Ethernet 8-25
Software 8-25
XNS internet transport protocols 8-26
Higher-level communication protocols 8-27
Limited clearinghouse service 8-27
Time service 8-28
Ethernet network number 8-28
Hardware 8-28
Workstations 8-28
Graphic stations 8-29
XNS spool file saturation 8-29
HIP job queue saturation 8-30
Interpress 8-31
Levels of support 8-31
Interpress sources 8-32
Understand Interpress performance with RIP 8-32
RIP text conversion and actual lines printed 8-32
Gray and textured objects 8-33
Gray shading and texture interlace 8-33
xvi XEROX 4635 LPS OPERATIONS REFERENCE
TABLE OF CONTENTS
Understand Interpress job integrity 8-33
Continuous printing of Interpress masters 8-33
Paper size support 8-34
Interpress image scaling 8-35
Integral scaling 8-35
Fractional scaling 8-35
.FRM file referencing 8-36
Character not in font file 8-36
Error summary sheet and break page 8-36
Error message 8-36
Interpress printing instructions 8-37
Content instructions 8-37
IDENTIFIER and STRING arguments 8-37
Printing instruction override 8-37
Media instruction 8-37
Interpress font utility (IFU) 8-38
Floating accents 8-38
Rendered and composite characters 8-39
Interpress fonts 8-40
Font file management 8-40
Font header extensions 8-40
IFU commands 8-41
IFU command syntax 8-41
IFU COMPRESS 8-41
IFU COPY 8-42
IFU DEFAULT 8-42
IFU DELETE 8-43
IFU FDR (recreate the font directory file) 8-43
IFU FILE 8-43
IFU IPFNTS 8-43
IFU LIST 8-44
IFU MOVE 8-44
IFU PRINTER 8-44
IFU REWIND 8-45
IFU SAMPLE 8-45
IFU SUBSTITUTION 8-45
IFU UNLOAD 8-45
IFU VOLINIT 8-46
Font substitution 8-46
Character code identifier 8-46
XEROX 4635 LPS OPERATIONS REFERENCE xvii
TABLE OF CONTENTS
Environment font name 8-47
Orientation and point size 8-47
IPFNTS 8-48
IPFNTS terminology 8-48
Font sets 8-48
Split fonts 8-49
Character code mapping 8-49
Interpress fonts .JSL 8-50
Basic structure of IPFNTS.JSL 8-54
Interpress font mapping 8-57
Interpress mappings limitation 8-57
Mapping in generic IPFNTS.JSL files 8-57
Generic IPFNTS.JSL file compilation 8-58
Critical files 8-58
9. Graphics on the LPS 9-1
Input for graphics 9-1
Processing modes 9-1
Random mode 9-2
Move mode 9-2
Block mode 9-2
Batch mode 9-2
Tape formats 9-3
Noninterleaved 9-3
Document interleaved 9-3
Page interleaved 9-4
Batch mode 9-4
Online formats 9-4
Noninterleaved 9-4
Document and page interleaved 9-4
Batch mode 9-5
Document interleaved graphic file transfers 9-5
Management of image files 9-6
Scaling 9-6
PDL graphics options 9-7
FDL GRAPHIC statement 9-8
Operational considerations 9-8
Recovery 9-8
Accounting 9-8
Graphic messages 9-9
Disk saturation 9-10
xviii XEROX 4635 LPS OPERATIONS REFERENCE
TABLE OF CONTENTS
Disk saturation 9-10
Performance 9-10
Random mode 9-10
Online 9-10
Document interleaved file creation 9-10
Restrictions 9-11
Graphic feature restrictions 9-11
10. Setting up print jobs 10-1
Compare V3A with other Xerox software versions 10-1
Compare job processing 10-1
Identify how print jobs run on V3A 10-1
Compare file compilation 10-1
Compare OSS command execution 10-2
Identify how V3A handles other OSS commands 10-2
Converting 4635 files to print on the 4650 LPS 10-2
SCALE 10-2
Controlling stock input to print jobs 10-3
High-capacity feeder (HCF) 10-3
What clusters are 10-4
Cluster features 10-4
Cluster processing overview 10-4
Cluster classification 10-5
What clusters do for the programmer and operator 10-5
Where clusters are stored 10-6
How applications use clusters 10-7
Simple and OTEXT applications 10-7
Stockset applications 10-7
Mixing applications 10-8
Defining clusters and stocksets with PDL and DJDE 10-8
Basic considerations 10-8
Steps for creating clusters 10-9
RFEED (record feed) 10-11
Keeping stockset changes to a minimum 10-12
Using clusters with ordered or tab stocks 10-12
Cluster commands 10-13
Using cluster commands 10-15
Cluster command examples 10-17
Keeping clusters in the database 10-17
Operator tasks using clusters 10-17
Irregular screen displays 10-18
XEROX 4635 LPS OPERATIONS REFERENCE xix
TABLE OF CONTENTS
Changing stock in trays 10-18
Sample operator procedure 10-19
A current tray in two clusters 10-20
Assigning the input trays with FEED 10-21
FEED (select input tray) 10-21
The FEED override sequence 10-23
Assigning an input tray for purge sheets 10-23
PFEED (purge feed) 10-23
Using stocks of varying sizes 10-24
Printing system pages 10-24
Supported paper sizes 10-25
SET CONTAINER (changing the known size of
a container) 10-25
SET TRAY (changing paper size for trays) 10-25
Feeding paper from the short edge 10-26
Feeding sequenced stocks 10-27
OSTK (ordered stock) 10-27
Setting up output from print jobs 10-28
Stock size and stacker bins 10-28
Assigning the stacker bins 10-29
SELECT 10-29
BLIMIT (bin limit) 10-29
SEPARATE 10-30
UNLOAD (lowering trays and bins) 10-30
BINFULL (setting maximum output to bin) 10-31
TRANS (running transparency jobs) 10-31
Backward compatibility 10-32
11. Running print jobs 11-1
Printing samples of system files 11-1
SAMPLE (during a print job) 11-1
SAMPLE (form, font, or logo) 11-2
SAMPLE (multiple copies of a form) 11-3
SAMPLE (extended .IMG options) 11-3
HARDCOPY 11-6
Controlling offline input for print jobs 11-11
SPACE (position tape or cartridge by report) 11-11
SPACE (position report printing by page) 11-11
MOVE (position tape or cartridge by block or file) 11-13
Rewind tape or cartridge 11-14
Unload tape or cartridge 11-14
xx XEROX 4635 LPS OPERATIONS REFERENCE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390
  • Page 391 391
  • Page 392 392
  • Page 393 393
  • Page 394 394
  • Page 395 395
  • Page 396 396
  • Page 397 397
  • Page 398 398
  • Page 399 399
  • Page 400 400
  • Page 401 401
  • Page 402 402
  • Page 403 403
  • Page 404 404
  • Page 405 405
  • Page 406 406
  • Page 407 407
  • Page 408 408
  • Page 409 409
  • Page 410 410
  • Page 411 411
  • Page 412 412
  • Page 413 413
  • Page 414 414
  • Page 415 415
  • Page 416 416
  • Page 417 417
  • Page 418 418
  • Page 419 419
  • Page 420 420
  • Page 421 421
  • Page 422 422
  • Page 423 423
  • Page 424 424
  • Page 425 425
  • Page 426 426
  • Page 427 427
  • Page 428 428
  • Page 429 429
  • Page 430 430
  • Page 431 431
  • Page 432 432
  • Page 433 433
  • Page 434 434
  • Page 435 435
  • Page 436 436
  • Page 437 437
  • Page 438 438
  • Page 439 439
  • Page 440 440
  • Page 441 441
  • Page 442 442
  • Page 443 443
  • Page 444 444
  • Page 445 445
  • Page 446 446

Xerox 4635 Laser Printing System User guide

Category
Software
Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI