Ferm PDM1042 User manual

Brand: Ferm

Model: PDM1042

Category: Power tools

Type: User manual

WWW.FERM.COM

Original instructions 03

PDM1042

11. 12.

Fig. B

Fig. A

ELECTRIC DRILL

PDM1042

Thank you for buying this FERM product. By

doing so you now have an excellent product,

delivered by one of Europe’s leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive warranty.

We hope you will enjoy using this product for

many years to come.

1. SAFETY INSTRUCTIONS

WARNING

Read the enclosed safety warnings,

the additional safety warnings and

the instructions. Failure to follow the safety

warnings and the instructions may result

in electric shock, fire and/or serious injury.

Keepthe safety warnings and the instructions

for future reference.

The following symbols are used in the user

manual or on the product:

Read the user manual.

Risk of personal injury.

Risk of electric shock

Immediately remove the mains plug from

the mains if the mains cable becomes

damaged and during cleaning and

maintenance.

Wear safety goggles.

Wear hearing protection.

Wear a dust mask.

Wear safety gloves.

Variable electronic speed

Double insulated.

Do not dispose of the product in

unsuitable containers.

Additional safety warnings for

electric drills

• Donotworkmaterialscontainingasbestos.

Asbestos is considered carcinogenic.

• Wearsafetygoggles.

• Wearhearingprotectiontoavoidtheriskof

hearing loss.

• Ifnecessary,useotherprotectivemeans,such

as safety gloves, safety shoes, etc.

• Holdthemachinebytheinsulatedgripping

surfaces where the accessory may contact

hiddenwiringorthemainscable.Ifthe

accessory contacts a ’live’ wire, the exposed

metal parts of the machine can also become

’live’. Risk of electric shock.

• Donotuseaccessorieswhicharenot

specifically designed and recommended by

the manufacturer. Risk of personal injury.

• Onlyuseaccessoriesthataresuitableforuse

with the machine.

• Onlyuseaccessorieswiththecorrect

dimensions. Make sure that the accessories

are properly mounted.

• Inspectthemachineandtheaccessories

beforeeachuse.Donotuseaccessories

which are bent, cracked, or otherwise

damaged.Ifthemachineoroneofthe

accessories is dropped, inspect the machine

ortheaccessoryfordamage.Ifnecessary,

replace the accessory.

• Letthemachinerunatnoloadinasafearea

aftermountingtheaccessories.Ifthemachine

vibrates strongly, immediately switch off the

machine, remove the mains plug from the

mains, and try to solve the problem.

• Makesurethatthemaximumspeedforthe

accessory is larger than or the same as the

maximum speed of the machine. Refer to the

rating plate on the machine.

• Beforeuse,removeallnailsandothermetal

objects from the workpiece.

• Makesurethattheworkpieceisproperly

supported or fixed.

• Keepyourhandsawayfromtheworkpiece

during use.

• Neverputthemachinedownonatableora

workbench before it has been switched off.

Electrical safety

Always check that the voltage of the

power supply corresponds to the voltage

on the rating plate.

• Donotusethemachineifthemainscableor

the mains plug is damaged.

• Onlyuseextensioncablesthataresuitable

for the power rating of the machine with a

minimum thickness of 1.5 mm

.Ifyouusea

extension cable reel, always fully unroll the

cable.

Technical specifications

PDM1042

Mains voltage 230 V~

Mains frequency 50 Hz

Power input 250W

No-load speed 0-4.500 /min

Max. drill diameter

Wood 9 mm

Steel 6.5 mm

Protection class IP 20

Weight 1.15 kg

Wear hearing protection.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns.

DESCRIPTION (FIG. A)

Your electric drill has been designed for drilling

holes in wood, metal and plastics.

1. On/offswitch

2. Lock-onbutton

4. Forward/reverseswitch

6. Chuck

7. Main grip

8. Chuck key

9. Chuck key holder

11.Depthstop

12.Depthsettingscrew

ASSEMBLY

Before assembly, always switch off the

machine and remove the mains plug from

the mains.

Mounting and removing the drill bit (fig. B)

The machine is suitable for use of the following

drill bits:

- Wood(HSS)

- Metal(HSS)

Mounting

• Placethechuckkey(8)intooneoftheholesin

thechuck(6).

• Openthechuck(6)byturningthechuckkey(8)

counterclockwise.

• Insertthedrillbit(10)intothechuck(6).

• Closethechuck(6)byturningthechuckkey

(8)clockwise.

• Removethechuckkey(8)fromthechuck(6).

Removing

• Placethechuckkey(8)intooneoftheholesin

thechuck(6).

• Openthechuck(6)byturningthechuckkey(8)

counterclockwise.

• Removethedrillbit(10)fromthechuck(6).

• Closethechuck(6)byturningthechuckkey

(8)clockwise.

• Removethechuckkey(8)fromthechuck(6).

USE

ADJUSTING THE DEPTH SETTING

Fig. A.

Thedepthstop(11)canbeusedforsettingthe

maximum drilling depth and can be installed on

the left and right side of the machine.

• Loosenthedepthsettingscrew(12)byturning

it counter clockwise.

• Thenadjustthedepthstop(11)tothedesired

settingandtightenthedepthsettingscrew(12)

again by turning it clockwise.

Switching on and off (fig. A)

• Toswitchonthemachine,presstheon/off

switch(1).Thefurthertheon/offswitch(1)is

pressed, the higher the speed of the machine.

• Toswitchthemachinetocontinuousmode,

keeptheon/offswitch(1)pressedand

simultaneouslypressthelock-onbutton(2).

• Toswitchoffcontinuousmode,presstheon/off

switch(1)again.

• Toswitchoffthemachine,releasetheon/off

switch(1).

Adjusting the rotation speed

Fig. A

• Pushtheon/offswitch(1)deepertoincrease

the rotation speed.

• Pushtheon/offswitch(1)lessdeeptolower

the rotation speed.

Forward/reverse switch (fig. A)

Do not change the direction of rotation

during use.

• Forclockwiserotation,slidetheforward/

reverseswitch(4)totheleft.

• Forcounterclockwiserotation,slidethe

forward/reverseswitch(4)totheright.

CLEANING AND MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

mains plug from the mains.

• Regularlycleanthehousingwithasoftcloth.

• Keeptheventilationslotsfreefromdustand

dirt.Ifnecessary,useasoft,moistclothto

remove dust and dirt from the ventilation slots.

• Regularlycleanthechuckandthedrillbitto

avoid inaccuracies during use.

WARRANTY

Consult the enclosed warranty terms.

ENVIRONMENT

Disposal

The product, the accessories, and the

packaging must be sorted for

environmentally friendly recycling.

Only for EC countries

Donotdisposeofpowertoolsintodomestic

waste. According to the European Guideline

2012/19/ECforWasteElectricalandElectronic

Equipment and its implementation into national

right, power tools that are no longer usable must

be collected separately and disposed of in an

environmentally friendly way.

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING!

Read all safety warnings and all

instructions. Failure to follow the

warnings and instructions may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ammable liquids, gases or dust. Power

tools create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodied plugs

and matching outlets will reduce risk of

electric shock.

b) Avoid body contact with earthed or

grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There

is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil,

sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric

shock.

e) When operating a power tool outdoors,

use an extension cord suitable for outdoor

use. Use of a cord suitable for outdoor use

reduces the risk of electric shock.

f) If operating a power tool in a damp

location is unavoidable, use a residual

current device (RCD) protected supply.

Use of an RCD reduces the risk of electric

shock.

3) Personal safety

a) Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use a power tool while

you are tired or under the inuence of

drugs, alcohol or medication. A moment of

inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment.

Always wear eye protection. Protective

equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce

personal injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting to power source and/or

battery pack, picking up or carrying the

tool. Carrying power tools with your nger

on the switch or energising power tools that

have the switch on invites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. A wrench

or a key left attached to a rotating part of the

power tool may result in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times. This enables better

control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose

clothes, jewellery or long hair can be caught

in moving parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust

related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your application.

The correct power tool will do the job

better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories, or

storing power tools. Such preventive safety

measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool’s operation.

If damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

5) Battery tool use and care

a) Recharge only with the charger specied

by the manufacturer. A charger that is

suitable for one type of battery pack may

create a risk of re when used with another

battery pack.

b) Use power tools only with specically

designated battery packs. Use of any other

battery packs may create a risk of injury and

re.

c) When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects that can make a

connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a re.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, ush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

6) Service

a) Have your power tool serviced by a

qualied repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

The product and the user manual are subject to

change.Specificationscanbechangedwithout

further notice.

Spare parts list

No. Description Position

102115 Cross head left screw M5×18 1

102116 Chuck 6.5mm 2

102117 Spindle 3

102118 Bearing60012Z 4

102119 Big gear 6

102120 Oilbearing 7

102121 Bearing6262RS 9

102122 Rotor 10

102123 Stator 11

102124 Springwasher 12

102125 Housing 13

102126 Depthlimiterset 15-17

102127 Carbonbrushholder(set2pcs) 21

102128 Carbonbrush(set2pcs) 22

102129 Switch 23

102130 Chuckkey(for6.5mmchuck) -

Exploded view

1606-22

Ferm PDM1042 User manual

Brand: Ferm

Model: PDM1042

Category: Power tools

Type: User manual

Download PDF

report

Ferm PDM1042 User manual

Ferm PDM1042 User manual

Related papers

Other documents