2. Roland
  3. UA-4FX2

Roland UA-4FX2 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Roland UA-4FX2 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Detailed Settings
1. Long-press the [ADVANCED EFFECTS] button to make it blink.
2. Operate the [SELECT] button or the eect knobs.
For details on settings other than “Species whether to mix the sounds of the guitar and mic,”
refer to the owner’s manual.
Guitar amp
Species whether to input
the sound of the mic from the
PHONES/HEADSET jack
Noise suppressor
Species whether to mix the
sounds of the guitar and mic.
Refer to the explanation on the
other side
Types
Bluesy
crunch sound
(factory setting)
JC
Flamboyant
metal sound
American rock sound
British rock
sound
Gain and presence of
the guitar amp
3. Press the [ADVANCED EFFECTS] button to make it go dark.
UA-4FX2
Copyright © 2017 ROLAND CORPORATION
* 5 1 0 0 0 5 6 0 1 8 - 0 1 *
UA-4FX2 Owner’s Manual Supplement
Settings for Connecting a Mic and Guitar
If you’re a singer/instrumentalist, here’s how to broadcast the mixed sounds of the mic and guitar.
1. Long-press the [ADVANCED EFFECTS] button to make it blink.
For details, refer to the front side of this leaet.
2. Press the [ON AIR] button to make it light.
If this is lit, the sounds of the mic and guitar are mixed. If this is unlit, the sound of either the mic or the
guitar is used depending on the setting of the [MIC/GUITAR] switch.
3. Press the [ADVANCED EFFECTS] button to make it go dark.
6
Connect your mic.
4
Set the [PHANTOM] switch as appropriate for the type of mic
that is connected.
Condenser mic “ON”
Dynamic mic “OFF”
5
Connect your guitar.
7
Adjust the volume.
Mic
Guitar
8
Set the switch to specify
whether the UA-4FX2’s
advanced eect is applied
to the mic or to the guitar.
/