Detailed Settings

1. Long-press the [ADVANCED EFFECTS] button to make it blink.

2. Operate the [SELECT] button or the eect knobs.

For details on settings other than “Species whether to mix the sounds of the guitar and mic,”

refer to the owner’s manual.

Guitar amp

Species whether to input

the sound of the mic from the

PHONES/HEADSET jack

Bluesy

crunch sound

(factory setting)

JC

Flamboyant

metal sound

American rock sound

British rock

sound

If you’re a singer/instrumentalist, here’s how to broadcast the mixed sounds of the mic and guitar.

1. Long-press the [ADVANCED EFFECTS] button to make it blink.

For details, refer to the front side of this leaet.

2. Press the [ON AIR] button to make it light.

If this is lit, the sounds of the mic and guitar are mixed. If this is unlit, the sound of either the mic or the

guitar is used depending on the setting of the [MIC/GUITAR] switch.

3. Press the [ADVANCED EFFECTS] button to make it go dark.

Mic

Guitar