2. CTA
  3. PAD-TPADM

CTA PAD-TPADM User manual

  • Hello, I've reviewed the user manual for the CTA PAD-TPADM Universal Tablet and Phone Adjustable Desk Mount. This document provides instructions on how to assemble the device, attach your phone or tablet, and adjust the mount for optimal viewing. I'm ready to answer your questions about the mount's features and setup.
  • How do I attach the phone holder to the articulating arm?
    How do I attach the articulating arms to the base?
    How can I attach my device to the holder?
x1
Universal Tablet and Phone Adjustable Desk Mount
PAD-TPADM
INSTALLATION - MANUAL
CONTENTS: BC
D
F
E
A
x1 x1
x1
x2
2. Attaching Articulating Arms to Base
INSTALLATION:
1. Attaching Phone Holder to Articulating Arm
3. Attaching Device to Holder Optional. Attaching Adhesive Pads
1A. Rotate in the phone holder
in the articulating arm adapter
until securely tightened.
2A. Slide the articulating arm into the dedicated mount location
on the base. Rotate in screw until moderately tightened with
your hand, no extra tools needed. Repeat to the other side.
D
C
3A. Use both hands to extend
the holders. Make sure that your
device size is compatible with
each of the holder.
Stick the (4) adhesives (F) below the base as shown for added
stability as needed.
3B. Insert your device inside the holder
and release it to contract it.
E
A
B
B
D
x4
x4
Portrait & Landscape
Adjustability
Tilt
Adjustability
Rotate each holder to the desired orientation. Rotate each joint to create the desired setup.
Base Swivel Adjustability
Rotate to the desired angle. Securely tighten the
bottom screw to create a more fixed setup.
Cable Management
Use hooks to route cable out of the way.
/