urban ambiance UQL3940 Installation guide

  • Hello! I've reviewed the installation instructions for the Urban Ambiance UQL3940 light fixture. This document details the tools needed, lists the package contents, and provides step-by-step instructions for assembling and wiring the fixture. It also emphasizes safety precautions and bulb specifications. I'm ready to answer any questions you may have about this product.
  • What type of bulbs are required for this fixture?
    Are the bulbs included with the fixture?
    What should I do if a part is missing or damaged?
1 of 3
Light SourceTools Required
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
60W
MAX
3 BULBS REQUIRED
BULBS NOT INCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
x 1
A
Package Contents
PARTS BAG Fixture Body
x 1
Crossbar
Assembly
Table of
Contents
STEP 1
D
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Wiring
STEP 2
Ring
x 1
FGlass Shade
x 1
G
Shade & Ring
STEP 5
Outlet Box Screw
x 2
B
Wire Connector
x 3
C
Fixture Body
STEP 3
Bulbs
STEP 4
Lock Screw
x 3
E
Installation Instructions: UQL3940
www.urbanambiance.com
2 of 3
STEP 1 1 2 3
Step 1
Install crossbar assembly
Step 2 - 3
Test fitting ceiling canopy to nipple
STEP 2
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
Supply wire from fixture
Ribbed side or identified
with the Label “N
supply wire from fixture
Smooth side or identified
with the label “L
STEP 3
www.urbanambiance.com
3of 3
STEP 4
STEP 5
23
Install Shade onto the Ring Install Shade with Ring
www.urbanambiance.com
/