2. Julian Bowen
  3. BEL202

Julian Bowen BEL202, BEL101, BEL103 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the BEL101 01 nesting tables. This document provides guidance on how to assemble the set of two tables with no extra tools needed. It includes a parts list and safety advice to make the assembly process easier and safer. I'm ready to answer your questions about the product.
  • Are any tools required for assembly?
    What safety advice should be followed?
    What should I do to protect the floor?
Nest of 2 Tables
BEL101
VERSION:190112 01
40cm
45cm
50cm
80cm
No Extra Tools
Required
CUSTOMER SERVICECUSTOMER SERVICE
Safety Advice
04
Please take the time to carefully read through the whole of these
instructions before you commence.
Keep these instructions for future reference.
Unpack,inspect and check off all of the contents.
Please dispose of all packaging safely.
Small component parts could choke a child if swallowed.
We strongly recommend that you keep children well away from the work
area.
It would be sensible to lay a sheet or blanket on the floor where you
intend to work to avoid scratching this product and to protect your floor.
This product is heavy.Take extreme care when lifting to avoid personal
injury or damage to the product.
Assemble the product as close to its intended final position in the room as
possible.
HANDY HINT: If you keep the hardware in a bowl during assembly you
will be less likely to lose them.
nest of 2 tables
08
/