2. DirekTronik
  3. 180-1812

DirekTronik 180-1812 User guide

  • Hello! I've reviewed the user guide for the Dualcomm ETAP-2206 Ver. B1 Network Tap. It appears to be a device that captures and monitors network traffic using both RJ45 and SFP ports. It has features like dual-link aggregation and the ability to stack units for more comprehensive network monitoring. I'm here to help answer any questions you have about its setup, functionality, or usage based on the provided guide.
  • What type of inline ports does the device have?
    How many monitor ports are available?
    What is the purpose of the monitor ports?
    What does a solid ON LED status mean?
LEDs
LED ON/OFF
Link Status
Solid OFF
Link Down
Solid ON
Link Up
Blinking
Sending/Receiving packets
Port LED: Link/Activity/Speed
User’s Quick Guide
Dual-Link GbE Copper & Fiber Network Tap
(Model No. ETAP-2206 Ver. B1)
Main Features:
•Dual-Link Aggregation Network Tap with two monitor ports
•Capture traffic of two full duplex gigabit links with a single network interface
•Stackable. Interconnecting multiple units for monitoring more than 2 links
•USB Powered
•Compatible with Power-over-Ethernet (PoE)
•Plug-and-Play. No user configuration is needed
Package Contents:
•One ETAP-2206 network tap unit
•One AC-to-USB power adapter (output = +5VDC )
•One USB Power Cable
RJ45
Inline Ports
SFP
Inline Ports
2x Monitor Ports
© 2017 Dualcomm Technology, Inc. All Rights Reserved. Rev 4.1 www.duacomm.com
-1- -2-
LED Color
Speed
Green
1000Mbps
Amber
100Mbps
Mixed Green & Amber
10Mbps
Link/Act
4321Power
123 4 5VDC
SFP1 SFP2
Connector s: RJ45 & SFP Ports
RJ45 Inline Ports
SFP Inline Ports
Monitor Ports*
1, 2
SFP1, SFP2
Ports 3, 4
Port Configuration
Power LED :
ON = Power OK; OFF = No Power
*Any of the two monitor ports can be used as a stacking port to interconnect
with a monitor port of another ETAP-2206 unit for monitoring more than 2
network inks.
/