2. SpiderWebShade
  3. SWS-SHDTOP-01JT4DBLU

SpiderWebShade SWS-SHDTOP-01JT4DBLU Installation guide

  • Hello, I'm your chat assistant. I've reviewed the provided install instructions for the SPIDERWEBSHADE JT Gladiator Sunshade. This document provides step-by-step guidance on how to install the sunshade, including windshield removal, adding SpiderNubs, and attaching shock cord loops. I'm ready to answer any questions you may have about the installation process or the product.
  • What tools are needed for the install?
    How do I remove the windshield wipers?
    How do I install the SpiderNubs?
    How are the shock cord loops attached?
1
1Use the socket in the Jeep® toolkit
provided to remove your windshield wipers.
(refer to your owner's manual)
Welcome to the SPIDERWEBSHADE® JT family. Here are a few tips to
make your install easier. You will need a few tools for this install
however, Jeep® and SPIDERWEBSHADE® provide everything you will
need to make this install a breeze.
2Use the ratchet in the Jeep® toolkit provided
to remove the (4) T40 windshield bolts and
carefully lower the windshield onto the hood
pads.
Gladiator Install Instructions:
Page 1 of 3
*patent pending design
2 3 4
3Attach the (4) header clips to the header
rail and then reconnect your windshield
and wipers.
4Locate the correct (10) factory T25 screws
to remove and add the custom Spider-
Nubs then replace the (10) factory T25
screws. 5 per side
5
12
3
45
passenger front
passenger rear
Page 2 of 3
passenger front
passenger rear
Attach the (10) shock cord loops to the new
SpiderNub mounting locations. Use the
provided leverage strap to assist and your
install is complete.
Page 3 of 3
/