2. SpiderWebShade
  3. Shadetop

SpiderWebShade Shadetop Installation guide

  • Hello! I have analyzed the provided install instructions for the SPIDERWEBSHADE JL 2D sunshade. This document details the steps for a smooth installation, using the provided Jeep toolkit to remove windshield wipers, then lowering the windshield, attaching header clips and SpiderNubs, and securing the setup with shock cord loops. I am ready to help you with your questions related to this install process.
  • What tools are needed for the installation?
    How to remove windshield wipers?
    How many windshield bolts need to be removed?
1
1Use the socket in the Jeep® toolkit
provided to remove your windshield wipers.
(refer to your owner's manual)
Welcome to the SPIDERWEBSHADE® JL family. Here are a few tips to
make your install easier. You will need a few tools for this install
however, Jeep® and SPIDERWEBSHADE® provide everything you will
need to make this install a breeze.
2Use the ratchet in the Jeep® toolkit provided
to remove the (4) T40 windshield bolts and
carefully lower the windshield onto the hood
pads.
JL2D Install Instructions:
Page 1 of 3
*patent pending design
2 3 4
3Attach the (4) header clips to the header
rail and then reconnect your windshield
and wipers.
4Locate the correct (8) factory T25 screws
to remove and add the custom Spider-
Nubs then replace the (8) factory T25
screws. 4 per side
5Attach the (8) shock cord loops to the new
SpiderNub mounting locations and your
install is complete.
1 2
3
4
passenger front
passenger rear
Page 2 of 3
passenger front
passenger rear
Page 3 of 3
/