idh by St. Simons 11014-026 Installation guide

Type
Installation guide
idh
by St. Simons, Inc.
Professional Grade Quality Solid Brass Decorative Hardware & Bath Accessories
Demand Quality, Demand idh
idhbrass.com
Installation Instructions
Professional Grade Quality Solid Brass
4” Flush Bolt with Square End
Item# 11014
Dimensions:
Face: 3/4 x 4
Throw: 3/4
Bolt Diameter: 3/10
Net Weight: 2.5 oz. (Part Only)
Gross Weight: 3 oz. (with Strikes and Screws)
Solid Brass Wood Screws
Strike: 5/8 x 1-1/2
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
Installation Instructions:
1. Mortise the inactive door.
2. Install flush bolt housing in the door edge using provided screws.
3. If using at the top of door: adjust bolt to be flush with the top of
the door when retracted. If using at the bottom of door: adjust bolt
to project when retracted.
4. Install strike.
5. Hang door.
Catalog Section: A
4” Flush Bolt with Square End
Item# 11014
Date: Rev 04/18
  • Page 1 1

idh by St. Simons 11014-026 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI