Audiovox MXS60CSS Owner's manual

Audiovox
Brand
Audiovox
Model
MXS60CSS
Type
Owner's manual

Audiovox MXS60CSS is a pair of 6½" marine component speakers. They are weatherproof and can be used in a variety of outdoor applications, such as on boats, ATVs, or motorcycles. The speakers have a peak power of 300 watts and a frequency response of 45Hz-20kHz. They come with a mounting template, hardware, and a crossover. The speakers can be flush mounted or surface mounted. The tweeters can be angled for optimal sound dispersion. The speakers are made of fiberglass and have a foam adhesive strip for easy installation.

Audiovox MXS60CSS is a pair of 6½" marine component speakers. They are weatherproof and can be used in a variety of outdoor applications, such as on boats, ATVs, or motorcycles. The speakers have a peak power of 300 watts and a frequency response of 45Hz-20kHz. They come with a mounting template, hardware, and a crossover. The speakers can be flush mounted or surface mounted. The tweeters can be angled for optimal sound dispersion. The speakers are made of fiberglass and have a foam adhesive strip for easy installation.

1/8"
To Crossover To Crossover
Input
Input- +
1
Use template sheet inside carton.
Trace onto mounting location.
Retirez le gabarit du carton.
Tracez sur l' emplacement
de montage.
Retire la plantilla del cartón.
Trazarlo sobre la ubicación
de montaje.
2
3
Cut
Coupez
Corte
Drill
Percez
Taladre
4
5
Striped wire
Fil rayé
Alambre rayado
Splice speaker wire with existing
receiver wire.
Épissez le câble du haut-parleur avec
le câble du récepteur afin de les
raccorder.
Junte los alambres del altavoz con los
alambres del receptor.
Connect spliced wires to speaker
terminals.
Connectez les câbles raccordés aux
bornes du haut-parleur.
Conecte los alambres empalmados a
los terminales del altavoz.
6
Install speaker with hardware provided.
Installer le haut-parleur grâce au matériel fourni.
Instale el parlante con el material provisto.
Actual product may differ slightly
from drawing.
Le produit réel risque d'être
légèrement différent
de celui du dessin.
El producto real puede ser
ligeramente distinto al mostrado
en el dibujo.
6½" Marine Component Speaker
Hauts-parleurs étanches de 16,5 cm
Parlantes estancos de 16,5 cm
Woofer Mount
Support pour woofe
Soporte para woofer
Tweeter Mount
Support de Tweeter
Supporto del Tweeter
-
+
Size: 297 x 210mm Model No.: MSX6CSS Install Guide Date: 17 AUG 07
Black
-
+
-
+
Red Dot
Tweeter
Haut-parleur d'aigus
Tweeter (altavoz de agudos)
Fiberglass Panel
Panneau de fibre de verre
Panel de fibra de vidrio
Flush Mount Surface Mount
1
Cut hole for mounting using the template provided.
Clean mounting surface area.
Faites un trou pour le montage en utilisant le
modèle fourni. Nettoyez la surface de montage.
Corte un agujero para el montaje según el modelo
proporcionado. Limpie la superficie de montaje.
2
Secure the tweeter by the foam adhesive
strip. Press firmly in place.
Fixez le haut-parleur d'aigus avec du ruban adhésif
en mousse. Maintenez-le fermement dans cette position.
Sujete el tweeter con cinta adhesiva de espuma.
Manténgalo firmemente.
1
Secure angled mounting
base to the surface.
Fixez la base de montage
avec angle à la surface.
Sujete la base de montaje
con ángulo a la superficie.
2
Secure the tweeter to the angled mounting base by
the foam adhesive strip. Press firmly in place.
À l'aide de ruban adhésif en mousse, fixez le haut-parleur d'aigus à la
base de montage avec angle. Maintenez-le fermement dans cette position.
Sujete con cinta adhesiva de espuma el tweeter a la base de montaje con
ángulo. Manténgalo firmemente.
Angled Mounting Base
Base de montage avec angle
Base de montaje con ángulo
Tweeter
Haut-parleur d'aigus
Tweeter (altavoz de agudos)
Adhesive on back surface
Connect to crossover
Connect to crossover
Adhesive on back surface
  • Page 1 1

Audiovox MXS60CSS Owner's manual

Audiovox
Brand
Audiovox
Model
MXS60CSS
Type
Owner's manual

Audiovox MXS60CSS is a pair of 6½" marine component speakers. They are weatherproof and can be used in a variety of outdoor applications, such as on boats, ATVs, or motorcycles. The speakers have a peak power of 300 watts and a frequency response of 45Hz-20kHz. They come with a mounting template, hardware, and a crossover. The speakers can be flush mounted or surface mounted. The tweeters can be angled for optimal sound dispersion. The speakers are made of fiberglass and have a foam adhesive strip for easy installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Other documents