Stage­worx BLS-300 HD Owner's manual

Brand
Stage­worx
Model
BLS-300 HD
Type
Owner's manual
BLS-300 HD
speaker / light stand
User manual
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: [email protected]
Internet: www.thomann.de
04.02.2021, ID: 406655 (V2)
Table of contents
1 General information................................................................................................................................. 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 7
2 Safety instructions..................................................................................................................................... 9
3 Features....................................................................................................................................................... 13
4 Operating.................................................................................................................................................... 14
5 Technical specications....................................................................................................................... 22
6 Protecting the environment.............................................................................................................. 24
Table of contents
BLS-300 HD
3
speaker / light stand
4
BLS-300 HD
speaker / light stand
1 General information
This manual contains important instructions for the safe operation of the product. Read and
follow the safety instructions and all other instructions. Keep the manual for future reference.
Make sure that it is available to all those using the product. If you sell the unit, please make
sure that the buyer also receives this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
BLS-300 HD
5
speaker / light stand
1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search
Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides
Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service
If you have any problems with the device the customer service will
gladly assist you.
General information
6
BLS-300 HD
speaker / light stand
1.2 Notational conventions
This manual uses the following notational conventions:
The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1. Switch on the device.
2. Press [Auto].
ð
Automatic operation is started.
3. Switch o the device.
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Instructions
General information
BLS-300 HD
7
speaker / light stand
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – danger zone.
General information
8
BLS-300 HD
speaker / light stand
2 Safety instructions
This speaker / light stand is used for stable xing and height-adjustable installation of loud‐
speaker cabinets and lights. Use the product only as described in this user manual. Any other
use or use under other operating conditions is considered to be improper and may result in
personal injury or property damage. No liability will be assumed for damages resulting from
improper use.
This product may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
product only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
BLS-300 HD
9
speaker / light stand
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not in
the reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the product. They could swallow the pieces and choke!
Never let children play unattended with the product.
CAUTION!
Danger of tipping when transported under load
If the stand is moved without having removed the installed device, the stand may
tip over and cause injuries and property damage.
Remove the installed device before transporting the stand.
Safety
Safety instructions
10
BLS-300 HD
speaker / light stand
CAUTION!
Danger of tipping on unsuitable surfaces
When the speaker stand is installed on soft or uneven ground, the stand may tip
over and cause injuries and property damage.
Install the stand only on even and solid surfaces.
CAUTION!
Danger of tipping due to overload
In case of overload, the stand may tip over and cause injuries and property
damage.
Never exceed the maximum load capacity specied for the stand.
Safety instructions
BLS-300 HD
11
speaker / light stand
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad
oor protectors or a carpet.
Safety instructions
12
BLS-300 HD
speaker / light stand
3 Features
Professional speaker and light stand
n Material: Steel / magnesium compound
n Individually reinforced legs for high stability
n Height: 195 to 300 cm
n Stand space diameter 140 cm
n Pipe diameter: 35 mm
n T truss (width: 150 cm) for mounting spotlights
n Pipe diameter T truss: 35 mm
n Suitable for xing 36 mm speaker ange
n Maximum load capacity: 80 kg when fastening with safety ropes and counterweights
n Maximum load capacity: 10 kg without fastening
Features
BLS-300 HD
13
speaker / light stand
4 Operating
Unpack and check carefully there is no transportation damage before using the product. Keep
the equipment packaging. To fully protect the product against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
CAUTION!
Danger of tipping when transported under load
If the stand is moved without having removed the installed device, the stand may
tip over and cause injuries and property damage.
Remove the installed device before transporting the stand.
Operating
14
BLS-300 HD
speaker / light stand
CAUTION!
Danger of tipping on unsuitable surfaces
When the speaker stand is installed on soft or uneven ground, the stand may tip
over and cause injuries and property damage.
Install the stand only on even and solid surfaces.
CAUTION!
Danger of tipping due to overload
In case of overload, the stand may tip over and cause injuries and property
damage.
Never exceed the maximum load capacity specied for the stand.
Operating
BLS-300 HD
15
speaker / light stand
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad
oor protectors or a carpet.
Comply with regulations
When installing and operating, make sure to follow the standards and regulations
that apply in your country.
Operating
16
BLS-300 HD
speaker / light stand
1. Unfold the feet of the stand until the cross braces are in a horizontal position.
2. Fix this position with the safety screw on the slider to which the three feet are attached.
3. Pull out the safety pin and loosen the safety screw on the extension tube.
4. Pull out the extension tube to the desired height and slide the safety pin through the
corresponding grid hole.
5. Fix the position of the extension tube with the safety screw on the tube clamp.
Installation
Operating
BLS-300 HD
17
speaker / light stand
Put the mounting of the loudspeaker cabinet on the extension tube. Observe the instructions
of the respective manufacturer.
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
Mounting loudspeaker cabinets
Operating
18
BLS-300 HD
speaker / light stand
1. Put the mounting of the T truss on the extension tube and x the T truss with the safety
screw on the extension tube.
2. If necessary, screw the optionally available adapter to the T truss. Observe the instruc‐
tions of the respective manufacturer.
Always ensure that the spotlights are distributed balanced and evenly on the T truss as illus‐
trated above.
Mounting spotlights
Operating
BLS-300 HD
19
speaker / light stand
Mounting two spotlights Max. load capacity: 2 × 30 kg
Mounting four spotlights Max. load capacity: 4 × 20 kg
Secure the stand using safety ropes and counterweights of 3 × 75 kg which are evenly distrib‐
uted around the stand in a radius of 1 m.
If you use the stand without fastening, the max. load capacity is 10 kg.
Secure a zone of 6,25 … 9 m
2
around the stand to prevent unauthorized access.
Securing the stand
Operating
20
BLS-300 HD
speaker / light stand
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Stage­worx BLS-300 HD Owner's manual

Brand
Stage­worx
Model
BLS-300 HD
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents