2. Home
  3. Lighting
  4. Stroboscopes & disco lights
  5. Igni­tion
  6. WAL-L412 BP Tour Pack 6in1
WAL-L412 BP Tour Pack 6in1

Igni­tion WAL-L412 BP Tour Pack 6in1, WAL-L412 BP, WAL-L412 BP Tour Pack 4in1 User manual

  • Hello! I am an AI chatbot trained to assist you with the Igni­tion WAL-L412 BP Tour Pack 6in1 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
WAL-L412 BP
LED spotlight
User manual
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: [email protected]
Internet: www.thomann.de
13.04.2021, ID: 461723 (V3)
Table of contents
1 General information................................................................................................................................. 6
1.1 Further information........................................................................................................................... 7
1.2 Notational conventions.................................................................................................................... 8
1.3 Symbols and signal words............................................................................................................... 8
2 Safety instructions.................................................................................................................................. 11
3 Features....................................................................................................................................................... 15
4 Installation.................................................................................................................................................. 17
4.1 Dealing with lithium batteries..................................................................................................... 22
5 Starting up.................................................................................................................................................. 24
6 Connections and controls................................................................................................................... 26
7 Operating.................................................................................................................................................... 32
7.1 Starting the device........................................................................................................................... 32
7.2 Main menu.......................................................................................................................................... 32
7.3 Menu overview................................................................................................................................. 39
7.4 Functions in 4-channel DMX mode........................................................................................... 40
Table of contents
WAL-L412 BP
3
LED spotlight
7.5 Functions in 6-channel DMX mode........................................................................................... 40
7.6 Functions in 9-channel DMX mode........................................................................................... 42
8 Technical specications....................................................................................................................... 48
9 Plug and connection assignments.................................................................................................. 51
10 Troubleshooting...................................................................................................................................... 52
11 Cleaning....................................................................................................................................................... 55
12 Protecting the environment.............................................................................................................. 56
Table of contents
4
WAL-L412 BP
LED spotlight
WAL-L412 BP
5
LED spotlight
1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
6
WAL-L412 BP
LED spotlight
1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search
Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides
Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service
If you have any problems with the device the customer service will
gladly assist you.
General information
WAL-L412 BP
7
LED spotlight
1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
Displays
General information
8
WAL-L412 BP
LED spotlight
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – dangerous optical radiation.
General information
WAL-L412 BP
9
LED spotlight
Warning signs Type of danger
Warning – suspended load.
Warning – danger zone.
General information
10
WAL-L412 BP
LED spotlight
2 Safety instructions
This device is intended for use as an electronic lighting eect by means of LED technology. The
device is designed for professional use only and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the operating life of the device by regular breaks and by avoiding frequent
switching on and o. The device is not suitable for continuous operation.
Intended use
Safety instructions
WAL-L412 BP
11
LED spotlight
Safety
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking
hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and
choke! Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts
inside. Do not use the device if covers, protectors or optical components are missing or damaged.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable
or the plug. Failure to do so could result in electric shock/death or re. If in doubt, seek advice from a registered electrician.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
Safety instructions
12
WAL-L412 BP
LED spotlight
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights.
WARNING!
Incorrect handling of lithium batteries can result in injury
In the event of a short circuit, overheating or mechanical damage, lithium batteries can cause severe injuries. Follow the advice on
the correct handling of lithium batteries in the present section.
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked ames.
NOTICE!
Risk of re due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries. Ensure that proper polarity is observed when inserting bat‐
teries.
NOTICE!
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device. Take batteries out of the device if it is not going to be used for a
longer period.
Safety instructions
WAL-L412 BP
13
LED spotlight
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react with the coating of your parquet, linoleum, laminate
or PVC oor and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the oor, but
use felt-pad oor protectors or a carpet.
NOTICE!
Possible damage to lithium-ion batteries through incorrect storage
By deep discharge, lithium-ion batteries can be permanently damaged or lose some of their capacity. Before long breaks, charge the
batteries to around 50 % of their capacity and then switch o the device. Store the device at room temperature or cooler in an envi‐
ronment as dry as possible. If the batteries are stored for a longer period, recharge them to 50 % every three months. Fully charge
the batteries only shortly before use at room temperature.
Safety instructions
14
WAL-L412 BP
LED spotlight
3 Features
Special features of the device:
n Four four-colour LEDs (RGBW, 12 W each)
n Battery-operated LED spotlight
n Operation in DMX mode (4, 6 or 9 channels)
n Foldable carrying handle on the top
n Spotlight with adjustable inclination angle
n Control via DMX, Wireless DMX, with the optionally available infrared remote control (item
no. 354223) as well as the buttons and the display on the device
n Numerous pre-programmed mixed colours and eects programmes
n Standing or hanging mounting
n Additional diusion lters available: 20° (item no. 461726), 40° (item no. 461727), 15x60°
(item no. 471120)
n Compatible charging station (Item no. 461728, optionally available).
n Compatible Touring Case 4in1 (Item no. 461732) or 6in1 (Item no. 461733) with power
supply for charging optionally available.
Features
WAL-L412 BP
15
LED spotlight
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Features
16
WAL-L412 BP
LED spotlight
4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Installation
WAL-L412 BP
17
LED spotlight
NOTICE!
Risk of overheating
The distance between light output and the illuminated surface must be more
than 1.5 m (19.7in).
Provide sucient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
ers.
Installation
18
WAL-L412 BP
LED spotlight
Equipment with degree of protection IP54 are dust protected and completely protected
against contact (rst code number). They are also protected against splash water from any
angle (second code digit). That is why this equipment can also be used outdoors. Event tech‐
nology equipment is generally only designed for temporary use however (event lighting) and
not for permanent use outdoors.
The specied degree of protection does not make a statement about the weather resistance of
the equipment (resistance to changing ambient conditions as well as against the eects of
sunlight and UV rays).
The seals and screw connections of the equipment must be checked regularly to ensure a
fault-free operation. In cases of doubt, consult a specialist workshop in due time.
You can install the unit in hanging or standing position. When in use, the device must always
be attached to a solid surface or an approved truss. Use the provided openings of the Omega
brackets for xing.
Always work from a stable platform whenever installing, moving or servicing the unit. In doing
so, the area underneath the unit must be cordoned o.
The safety cable must be threaded through the cut-outs in the housing.
Information about degree of
protection IP54
Mounting options
Installation
WAL-L412 BP
19
LED spotlight
Please note that this device must not be connected to a dimmer.
The infrared receiver for the remote control signals is located in the display. Make sure it's not
obstructed.
Infrared sensor for the remote
control
Installation
20
WAL-L412 BP
LED spotlight
/