Stageworx BLS-300 HD Owner's manual

BLS-300 HD

speaker / light stand

User manual

Musikhaus Thomann

Thomann GmbH

Hans-Thomann-Straße 1

96138 Burgebrach

Germany

Telephone: +49 (0) 9546 9223-0

E-mail: [email protected]

Internet: www.thomann.de

04.02.2021, ID: 406655 (V2)

Table of contents

1 General information................................................................................................................................. 5

1.1 Further information........................................................................................................................... 6

1.2 Notational conventions.................................................................................................................... 7

1.3 Symbols and signal words............................................................................................................... 7

2 Safety instructions..................................................................................................................................... 9

3 Features....................................................................................................................................................... 13

4 Operating.................................................................................................................................................... 14

5 Technical specications....................................................................................................................... 22

6 Protecting the environment.............................................................................................................. 24

Table of contents

BLS-300 HD

3

speaker / light stand

4

BLS-300 HD

speaker / light stand

1 General information

This manual contains important instructions for the safe operation of the product. Read and

follow the safety instructions and all other instructions. Keep the manual for future reference.

Make sure that it is available to all those using the product. If you sell the unit, please make

sure that the buyer also receives this manual.

Our products and user manuals are subject to a process of continuous development. We there‐

fore reserve the right to make changes without notice. Please refer to the latest version of the

user manual which is ready for download under www.thomann.de.

General information

BLS-300 HD

5

speaker / light stand

1.1 Further information

On our website (www.thomann.de) you will nd lots of further information and details on the

following points:

Download This manual is also available as PDF le for you to download.

Keyword search

Use the search function in the electronic version to nd the topics of

interest for you quickly.

Online guides

Our online guides provide detailed information on technical basics

and terms.

Personal consultation For personal consultation please contact our technical hotline.

Service

If you have any problems with the device the customer service will

gladly assist you.

General information

6

BLS-300 HD

speaker / light stand

1.2 Notational conventions

This manual uses the following notational conventions:

The individual steps of an instruction are numbered consecutively. The result of a step is

indented and highlighted by an arrow.

Example:

1. Switch on the device.

2. Press [Auto].

ð

Automatic operation is started.

3. Switch o the device.

1.3 Symbols and signal words

In this section you will nd an overview of the meaning of symbols and signal words that are

used in this manual.

Instructions

General information

BLS-300 HD

7

speaker / light stand

Signal word Meaning

DANGER! This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or

serious injury if it is not avoided.

CAUTION! This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in minor injury if it

is not avoided.

NOTICE! This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and

environmental damage if it is not avoided.

Warning signs Type of danger

Warning – danger zone.

General information

8

BLS-300 HD

speaker / light stand

2 Safety instructions

This speaker / light stand is used for stable xing and height-adjustable installation of loud‐

speaker cabinets and lights. Use the product only as described in this user manual. Any other

use or use under other operating conditions is considered to be improper and may result in

personal injury or property damage. No liability will be assumed for damages resulting from

improper use.

This product may be used only by persons with sucient physical, sensorial, and intellectual

abilities and having corresponding knowledge and experience. Other persons may use this

product only if they are supervised or instructed by a person who is responsible for their safety.

Intended use

Safety instructions

BLS-300 HD

9

speaker / light stand

DANGER!

Danger for children

Ensure that plastic bags, packaging, etc. are properly disposed of and are not in

the reach of babies and young children. Choking hazard!

Ensure that children do not detach any small parts (e.g. knobs or the like) from

the product. They could swallow the pieces and choke!

Never let children play unattended with the product.

CAUTION!

Danger of tipping when transported under load

If the stand is moved without having removed the installed device, the stand may

tip over and cause injuries and property damage.

Remove the installed device before transporting the stand.

Safety

Safety instructions

10

BLS-300 HD

speaker / light stand

CAUTION!

Danger of tipping on unsuitable surfaces

When the speaker stand is installed on soft or uneven ground, the stand may tip

over and cause injuries and property damage.

Install the stand only on even and solid surfaces.

CAUTION!

Danger of tipping due to overload

In case of overload, the stand may tip over and cause injuries and property

damage.

Never exceed the maximum load capacity specied for the stand.

Safety instructions

BLS-300 HD

11

speaker / light stand

NOTICE!

Possible staining

The plasticiser contained in the rubber feet of this product may possibly react

with the coating of your parquet, linoleum, laminate or PVC oor and after some

time cause permanent dark stains.

In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad

oor protectors or a carpet.

Safety instructions

12

BLS-300 HD

speaker / light stand

3 Features

Professional speaker and light stand

n Material: Steel / magnesium compound

n Individually reinforced legs for high stability

n Height: 195 to 300 cm

n Stand space diameter 140 cm

n Pipe diameter: 35 mm

n T truss (width: 150 cm) for mounting spotlights

n Pipe diameter T truss: 35 mm

n Suitable for xing 36 mm speaker ange

n Maximum load capacity: 80 kg when fastening with safety ropes and counterweights

n Maximum load capacity: 10 kg without fastening

Features

BLS-300 HD

13

speaker / light stand

4 Operating

Unpack and check carefully there is no transportation damage before using the product. Keep

the equipment packaging. To fully protect the product against vibration, dust and moisture

during transportation or storage use the original packaging or your own packaging material

suitable for transport or storage, respectively.

CAUTION!

Danger of tipping when transported under load

If the stand is moved without having removed the installed device, the stand may

tip over and cause injuries and property damage.

Remove the installed device before transporting the stand.

Operating

14

BLS-300 HD

speaker / light stand

CAUTION!

Danger of tipping on unsuitable surfaces

When the speaker stand is installed on soft or uneven ground, the stand may tip

over and cause injuries and property damage.

Install the stand only on even and solid surfaces.

CAUTION!

Danger of tipping due to overload

In case of overload, the stand may tip over and cause injuries and property

damage.

Never exceed the maximum load capacity specied for the stand.

Operating

BLS-300 HD

15

speaker / light stand

NOTICE!

Possible staining

The plasticiser contained in the rubber feet of this product may possibly react

with the coating of your parquet, linoleum, laminate or PVC oor and after some

time cause permanent dark stains.

In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad

oor protectors or a carpet.

Comply with regulations

When installing and operating, make sure to follow the standards and regulations

that apply in your country.

Operating

16

BLS-300 HD

speaker / light stand

1. Unfold the feet of the stand until the cross braces are in a horizontal position.

2. Fix this position with the safety screw on the slider to which the three feet are attached.

3. Pull out the safety pin and loosen the safety screw on the extension tube.

4. Pull out the extension tube to the desired height and slide the safety pin through the

corresponding grid hole.

5. Fix the position of the extension tube with the safety screw on the tube clamp.

Installation

Operating

BLS-300 HD

17

speaker / light stand

Put the mounting of the loudspeaker cabinet on the extension tube. Observe the instructions

of the respective manufacturer.

NOTICE!

Use of stands

When mounting the device onto a stand, ensure that the stand is in a safe and

stable position and that the weight of the device does not exceed the maximum

permissible load capacity of the stand.

Mounting loudspeaker cabinets

Operating

18

BLS-300 HD

speaker / light stand

1. Put the mounting of the T truss on the extension tube and x the T truss with the safety

screw on the extension tube.

2. If necessary, screw the optionally available adapter to the T truss. Observe the instruc‐

tions of the respective manufacturer.

Always ensure that the spotlights are distributed balanced and evenly on the T truss as illus‐

trated above.

Mounting spotlights

Operating

BLS-300 HD

19

speaker / light stand

Mounting two spotlights Max. load capacity: 2 × 30 kg

Mounting four spotlights Max. load capacity: 4 × 20 kg

Secure the stand using safety ropes and counterweights of 3 × 75 kg which are evenly distrib‐

uted around the stand in a radius of 1 m.

If you use the stand without fastening, the max. load capacity is 10 kg.

Secure a zone of 6,25 … 9 m

2

around the stand to prevent unauthorized access.

Securing the stand

Operating

20

BLS-300 HD

speaker / light stand

Page is loading ...

Stageworx BLS-300 HD Owner's manual

Stageworx BLS-300 HD Owner's manual

Related papers

Other documents

Stage­worx BLS-300 HD Owner's manual

Stage­worx BLS-300 HD Owner's manual

Related papers

Other documents

Stageworx BLS-300 HD Owner's manual

Stageworx BLS-300 HD Owner's manual